From: Jeff Garzik <jgarzik@pobox.com>
To: "Bill Rugolsky Jr." <brugolsky@telemetry-investments.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libata: 2.6.7-bk6,12 hang with ata_piix in combined mode; -bk5 ok
Date: Sun, 04 Jul 2004 14:03:23 -0400 [thread overview]
Message-ID: <40E8466B.9000702@pobox.com> (raw)
In-Reply-To: <20040630005420.GA4163@ti64.telemetry-investments.com>
Bill Rugolsky Jr. wrote:
> Jeff,
>
> I have a Dell Poweredge 750 with a pair of Maxtor 250GB SATA drives
> running Fedora Core 1 + upgrades to support 2.6.
>
> The Dell BIOS configures the controller in combined mode.
> Kernel 2.6.7-bk5 boots, while 2.6.7-bk6,bk12 generate the following
> timeout (copied by hand):
>
> ata_piix: combined mode detected
> ACPI: PCI interrupt 0000:1f.2[A]: no GSI
> ata: 0x1f0 IDE port busy
> ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFEA8 irq 15
> ata1: dev 0 ATA, max UDMA/133 488281250 sectors: lba48
> ata1: dev 1 ATA, max UDMA/133 488281250 sectors: lba48
> ata1: dev0 configured for UDMA/133
> ata1: dev1 configured for UDMA/133
> scsi0: ata_piix
> Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
> Type: Direct Access ANSI SCSI revision: 05
> SCSI device sda: 488281250 512-byte hdwr sectors (250000MB)
> SCSI device sda: drive cache: write back
> sda:<3>ata1: command 0x25 timeout, stat 0xd0 host_stat 0x64
If "acpi=off" does not fix this, please test the patch I posted recently
[PATCH,RFT] SATA interrupt handling
next prev parent reply other threads:[~2004-07-04 18:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-30 0:54 libata: 2.6.7-bk6,12 hang with ata_piix in combined mode; -bk5 ok Bill Rugolsky Jr.
2004-06-30 1:20 ` Jeff Garzik
2004-06-30 15:56 ` Bill Rugolsky Jr.
2004-06-30 18:02 ` Jeff Garzik
2004-07-04 18:03 ` Jeff Garzik [this message]
2004-07-05 1:34 ` Bill Rugolsky Jr.
[not found] <A6974D8E5F98D511BB910002A50A6647615FF44B@hdsmsx403.hd.intel.com>
2004-07-05 20:39 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40E8466B.9000702@pobox.com \
--to=jgarzik@pobox.com \
--cc=brugolsky@telemetry-investments.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.