From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Tue, 13 Jul 2004 09:37:14 +0100 (BST) Received: from mail.oricom.de ([IPv6:::ffff:62.116.167.249]:43712 "EHLO oricom4.internetx.de") by linux-mips.org with ESMTP id ; Tue, 13 Jul 2004 09:37:10 +0100 Received: from mycable.de (c192176.adsl.hansenet.de [213.39.192.176]) (authenticated bits=0) by oricom4.internetx.de (8.13.0/8.13.0) with ESMTP id i6D8bNE2015286; Tue, 13 Jul 2004 10:37:27 +0200 Message-ID: <40F39F31.70102@mycable.de> Date: Tue, 13 Jul 2004 10:37:05 +0200 From: Tiemo Krueger - mycable GmbH User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.6a) Gecko/20031030 X-Accept-Language: en-us, en MIME-Version: 1.0 To: safiudeen Ts , linux-mips@linux-mips.org Subject: Re: Jtag spec. and the firmware for Au1100 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 5460 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: tk@mycable.de Precedence: bulk X-list: linux-mips Normally you could use a boatloader like Yamon or uboot to load something from a tftp-server or serial conenction on the board. If there isn't any bootloader on the board you have to flash one on your board. This should normally be provided with the board (which one do you have?). Ejtag: The pin specification for ejtag should be in the board documentation, normally it's quite easy to build an adapter to connect it to ejtag hardware like the bdi2000 or similar. firmware: So you mean a kernel and maybe a rootfile-system? Didn't came anything with the board? Depending on the HW-components on the board you may require your own kernel which you can build from the sources on Linux-mips.org, try at first a default configuration for the Au1100. Tiemo safiudeen Ts wrote: > How can we copy the kernel image to target board (processor au1100 )? > if we want to use JTAG where can I get the jatg schemetic detailes and > the firmware for Red Hat linux 9 > please any one can help me in this regards > > than you > safi > > _________________________________________________________________ > Protect your PC - get McAfee.com VirusScan Online > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > >