From: Go Taniguchi <go@turbolinux.co.jp>
To: Karen Shaeffer <shaeffer@neuralscape.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: dptiO hangs on boot
Date: Sat, 31 Jul 2004 16:19:35 +0900 [thread overview]
Message-ID: <410B4807.5030001@turbolinux.co.jp> (raw)
In-Reply-To: <20040730191507.GA678@synapse.neuralscape.com>
Karen Shaeffer wrote:
> Hello,
>
> The dpt_i2o driver hangs on boot. I am running the
> linux-2.6.8-rc2-bk7. Everything proceeds as expected,
> until md autodetects the RAID arrays, which hangs at
> the line,
>
> md: ... autorun DONE.
>
> After a number of minutes, The driver reports,
>
> dptiO: Trying to Abort cmd=70
>
> And then the system hangs indefinitely.
Probably you must select dpt_i2o or i2o_scsi for Adaptec I2O RAID controller driver.
>
>
> I include some information from the boot logs here:
>
> Jul 30 01:45:15 demo kernel: Detecting Adaptec I2O RAID controllers...
> Jul 30 01:45:15 demo kernel: Adaptec I2O RAID controller 0 irq=106
> Jul 30 01:45:15 demo kernel: BAR0 f889a000 - size= 100000
> Jul 30 01:45:15 demo kernel: BAR1 f899b000 - size= 1000000
> Jul 30 01:45:15 demo kernel: dpti: If you have a lot of devices this could take a few minutes.
> Jul 30 01:45:15 demo kernel: dpti0: Reading the hardware resource table.
> Jul 30 01:45:15 demo kernel: TID 008 Vendor: ADAPTEC Device: AIC-7902 Rev: 00000001
> Jul 30 01:45:15 demo kernel: TID 009 Vendor: ADAPTEC Device: AIC-7902 Rev: 00000001
> Jul 30 01:45:15 demo kernel: TID 528 Vendor: IBM I Device: IC35L036UCDY Rev: S27EE
> Jul 30 01:45:15 demo kernel: TID 516 Vendor: IFT I Device: IFT-7200 Rev: 0145
> Jul 30 01:45:15 demo kernel: scsi0 : Vendor: Adaptec Model: 2010S FW:3B05
> Jul 30 01:45:15 demo kernel: Vendor: IBM Model: IC35L036UCDY10-0 Rev: S27E
> Jul 30 01:45:15 demo kernel: Type: Direct-Access ANSI SCSI revision: 03
> Jul 30 01:45:15 demo kernel: Vendor: IFT Model: IFT-7200 Rev: 0145
> Jul 30 01:45:15 demo kernel: Type: Direct-Access ANSI SCSI revision: 04
> ....
> Jul 30 01:45:15 demo kernel: SCSI device sda: 71687323 512-byte hdwr sectors (36704 MB)
> Jul 30 01:45:15 demo kernel: SCSI device sda: drive cache: write back
> Jul 30 01:45:15 demo kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
> Jul 30 01:45:15 demo kernel: Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
> Jul 30 01:45:15 demo kernel: SCSI device sdb: 78183919 512-byte hdwr sectors (40030 MB)
> Jul 30 01:45:15 demo kernel: SCSI device sdb: drive cache: write through
> Jul 30 01:45:15 demo kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
> Jul 30 01:45:15 demo kernel: Attached scsi disk sdb at scsi0, channel 1, id 0, lun 0
> Jul 30 01:45:15 demo kernel: Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 0
> Jul 30 01:45:15 demo kernel: Attached scsi generic sg1 at scsi0, channel 1, id 0, lun 0, type 0
> Jul 30 01:45:15 demo kernel: I2O Core - (C) Copyright 1999 Red Hat Software
> Jul 30 01:45:15 demo kernel: I2O: Event thread created as pid 167
> Jul 30 01:45:15 demo kernel: i2o: Checking for PCI I2O controllers...
> Jul 30 01:45:15 demo kernel: I2O configuration manager v 0.04.
> Jul 30 01:45:15 demo kernel: (C) Copyright 1999 Red Hat Software
> Jul 30 01:45:15 demo kernel: I2O Block Storage OSM v0.9
> Jul 30 01:45:15 demo kernel: (c) Copyright 1999-2001 Red Hat Software.
> Jul 30 01:45:15 demo kernel: i2o_block: Checking for Boot device...
> Jul 30 01:45:15 demo kernel: i2o_block: Checking for I2O Block devices...
> Jul 30 01:45:15 demo kernel: i2o_scsi.c: Version 0.1.2
> Jul 30 01:45:15 demo kernel: chain_pool: 0 bytes @ f7d8421c
> Jul 30 01:45:15 demo kernel: (512 byte buffers X 4 can_queue X 0 i2o controllers)
> Jul 30 01:45:15 demo kernel: Fusion MPT base driver 3.01.03
> Jul 30 01:45:15 demo kernel: Copyright (c) 1999-2004 LSI Logic Corporation
> Jul 30 01:45:15 demo kernel: Fusion MPT SCSI Host driver 3.01.03
> Jul 30 01:45:15 demo kernel: Fusion MPT LAN driver 3.01.03
> ......
> Jul 30 01:45:16 demo kernel: md: linear personality registered as nr 1
> Jul 30 01:45:16 demo kernel: md: raid0 personality registered as nr 2
> Jul 30 01:45:16 demo kernel: md: raid1 personality registered as nr 3
> Jul 30 01:45:16 demo kernel: md: raid5 personality registered as nr 4
> Jul 30 01:45:16 demo kernel: raid5: measuring checksumming speed
> Jul 30 01:45:16 demo kernel: 8regs : 2352.000 MB/sec
> Jul 30 01:45:16 demo kernel: 8regs_prefetch: 2172.000 MB/sec
> Jul 30 01:45:16 demo kernel: 32regs : 1480.000 MB/sec
> Jul 30 01:45:16 demo kernel: 32regs_prefetch: 1400.000 MB/sec
> Jul 30 01:45:16 demo kernel: pIII_sse : 2584.000 MB/sec
> Jul 30 01:45:16 demo kernel: pII_mmx : 3152.000 MB/sec
> Jul 30 01:45:16 demo kernel: p5_mmx : 3108.000 MB/sec
> Jul 30 01:45:16 demo kernel: raid5: using function: pIII_sse (2584.000 MB/sec)
> Jul 30 01:45:16 demo kernel: md: multipath personality registered as nr 7
> Jul 30 01:45:16 demo kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> Jul 30 01:45:16 demo kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
> Jul 30 01:45:16 demo kernel: device-mapper: dm_multipath v0.2.0
> Jul 30 01:45:16 demo kernel: oprofile: using NMI interrupt.
> Jul 30 01:45:16 demo kernel: NET: Registered protocol family 2
> Jul 30 01:45:16 demo kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
> Jul 30 01:45:16 demo kernel: TCP: Hash tables configured (established 262144 bind 65536)
> Jul 30 01:45:16 demo kernel: NET: Registered protocol family 1
> Jul 30 01:45:16 demo kernel: NET: Registered protocol family 17
> Jul 30 01:45:16 demo kernel: ACPI: (supports S0 S1 S4 S5)
> Jul 30 01:45:16 demo kernel: BIOS EDD facility v0.13 2004-Mar-09, 6 devices found
> Jul 30 01:45:16 demo kernel: Please report your BIOS at http://linux.dell.com/edd/results.html
> Jul 30 01:45:16 demo kernel: md: Autodetecting RAID arrays.
> Jul 30 01:45:16 demo kernel: md: autorun ...
> Jul 30 01:45:16 demo kernel: md: ... autorun DONE.
>
> If I can provide any additional information, please let me know.
> Thanks,
> Karen
prev parent reply other threads:[~2004-07-31 7:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-30 19:15 dptiO hangs on boot Karen Shaeffer
2004-07-31 7:19 ` Go Taniguchi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=410B4807.5030001@turbolinux.co.jp \
--to=go@turbolinux.co.jp \
--cc=linux-scsi@vger.kernel.org \
--cc=shaeffer@neuralscape.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.