RM9000x2 TLB load exception

[willem.acke@alcatel.be]

All,

I'm trying to port the mips-kernel to a RM9000x2 based custom board.
The kernel file (mips 32) is loaded using VxWorks boot loader.
I got the to the point where the kernel starts loading, but exits with a 
'TLB load exception'.
After putting in a number of printks, it seems that it fails on 
'flush_icache_range' in arch/mips/mm/pg-r4k.c -> build_clear_page.
Since I'm a newbie to this, any pointers to how to tackle this problem 
would be appreciated.

Exception:
Tlb Load Exception
Exception Program Counter: 0x00000000
Status Register: 0x3404ff00
Cause Register: 0x01100008
Access Address : 0x00000000
Task: 0x83e2c760 ""

$0    =                0   t0    =          3ffffff   s0    =         
24810e00
at    =         3404ff00   t1    = fffffffffc1fffff   s1    = 
ffffffffac800000
v0    =                0   t2    = ffffffffffff0000   s2    = 
ffffffffac800004
v1    =                1   t3    =           800000   s3    = 
ffffffffcc9e0200
a0    = ffffffff801a6f30   t4    = ffffffffac000000   s4    = 
ffffffffac800008
a1    = ffffffff801a6f94   t5    =            40000   s5    = 
ffffffffac80000c
a2    = ffffffff801508e8   t6    =             7fff   s6    
=                0
a3    = ffffffff80173e84   t7    =         24000000   s7    =         
24840020
s8    = ffffffff83e2c268   k0    =                0
gp    = ffffffff80172000   k1    =                0   t8    
=                a
ra    = ffffffff80179254   sp    = ffffffff80173e80   t9    = 
ffffffffac80fff8
divlo =             1000   divhi =                0   sr    = 3404ff00
pc    =        0

Thanks in advance,

Wim Acke