[U-Boot-Users] Re: u-boot and linux-2.6.9

[Alan Casey <alan.casey5@mail.dcu.ie>]

Hi,

  Jean-Paul Saman originally raised this issue before
  Christmas:

>> I am trying to boot on an ARM-Integrator AP a linux-2.6.9 kernel with

>> u-boot.  I tried u-boot-1.1.1 stable and cvs, but both result in "data

>> abort" just at the point of "Starting kernel .... ". Here is the dump
from 
>> minicom:
>> 
>> Integrator-AP # bootm 24400000  
>> Boot reached stage 1  
>> ## Booting image at 24400000 ...  
>> Boot reached stage 2  
>> Boot reached stage 3  
>>    Image Name:   Linux-2.6.9  
>>    Image Type:   ARM Linux Kernel Image (uncompressed)  
>>    Data Size:    1216080 Bytes =  1.2 MB  
>>  Load Address: 00008000
>>  Entry Point:  00008000  
>> Boot reached stage 4  
>> Boot reached stage 5  
>> Boot reached stage 6  
>> OK  
>> Boot reached stage 7  
>> Boot reached stage 8  
>> Boot reached stage 14  
>> No initrd  
>> Boot reached stage 15  
>> ## Transferring control to Linux (at address 00008000) ...  
>>   
>> Starting kernel ...  
>>  
>> data abort  
>> pc : [<0000801c>]    lr : [<0100bcbc>]  
>> sp : 00fd7bd4  ip : 00fd7bc4  fp : 00fd7c10  
>> r10: 00000000  r9 : 00fd7c84  r8 : 00fd7fdc  
>> r7 : 0100f1b4  r6 : 0100f1b4  r5 : 00000000  r4 : 24400040  
>> r3 : e1a00001  r2 : 00000100  r1 : e1a00000  r0 : 00000000  
>> Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  
>> Resetting CPU ... 
 
 I have an Integrator/CP board which contains an ARM920T macrocell
 but i get a similar message to the above. From the mailing list 
 archives it appears this issue was not resolved?? If it was let
 me know how to fix it please.

 Regards&Thanks,
 Alan.