From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rodolfo Brasnarof" Subject: Re: Terminal program Date: Sat, 14 Aug 2004 01:03:35 -0300 Sender: linux-hams-owner@vger.kernel.org Message-ID: <411D64E7.24370.396C1@localhost> References: <1092262861.3581.12.camel@celeron.munn.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7BIT Return-path: In-reply-to: <1092262861.3581.12.camel@celeron.munn.com> Content-description: Mail message body List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-hams@vger.kernel.org --- On 12 Aug 2004 at 8:21, David Munn wrote: > Hi All, > I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and > LinPac with the ax25 programs for packet....i usually use a Baycom modem > but it has gone belly up so have pressed a PaComm TNC320 into > service.....it works well in KISS mode. > However there one or two commands that i need to put into the tnc but > cant do it with LinPac... > Does anyone know of a Linux terminal program that can be used to work a > tnc in Command Mode.....preferably one that does not use X windows..... > Have looked on Radio.linux.org.au but cant seem to see one there...i > might be a bit dumb here hi hi.... What do you need. To operate packet in command mode, or just to give your tnc a few commands before switching to kiss mode?