From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lance Dryden Subject: sym53c8xx_2 version 2.1.18j domain validation failures (was Re: Sym53c8xx_2) Date: Sat, 21 Aug 2004 18:51:52 -0400 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <4127D208.6010600@jound.net> References: <1092366037.28144.202254467@webmail.messagingengine.com> <1092432298.18813.202307545@webmail.messagingengine.com> <1092624889.15338.202386294@webmail.messagingengine.com> <41209D02.6010202@jound.net> <1092738272.28646.202482540@webmail.messagingengine.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from dsl081-200-116.nyc2.dsl.speakeasy.net ([64.81.200.116]:3715 "EHLO ellision") by vger.kernel.org with ESMTP id S267993AbUHUWwJ (ORCPT ); Sat, 21 Aug 2004 18:52:09 -0400 In-Reply-To: <1092738272.28646.202482540@webmail.messagingengine.com> List-Id: linux-scsi@vger.kernel.org To: Kai OM Cc: linux-scsi@vger.kernel.org Apologies for the late reply. What I have found is that only my Quantum Atlas disks seem to have the problem with domain validation at boot-up. My results are below. The first test was successful, the second was not. Both host adapters were installed and enumerated by the kernel in the order listed. Kernel was 2.6.8.1 from kernel.org. === BEGIN TEST 1 === 53c895 - 2x Quantum Atlas V - 1x Ecrix VXA-1 53c1010 - 1x Compaq OEM device - 1x Plextor Status: Successful DV, all devices === BEGIN TEST 2 === 53c895 - 1x Atlas - 1x Ecrix 53c1010 - 1x Atlas - 1x Compaq - 1x Plextor Status: UNSUCCESSFUL DV against - Vendor:"QUANTUM" Model:"ATLAS_V_18_WLS" Rev:"0200" === BEGIN TEST 2 CONSOLE LOG SNIPPET === sym1:2:0: tagged command queueing enabled, command queue depth 16 scsi(1:0:2:0): Beginning Domain Validation sym1:2: wide asynchronous sym1:2:0: ABORT operation started. sym1:2:0: ABORT operation timed-out sym1:2:0: DEVICE RESET operation started sym1:2:0: DEVICE RESET operation timed-out. sym1:2:0: BUS RESET operation started. sym1: SCSI BUS reset detected. sym1: SCSI BUS has been reset. sym1:2:0: BUS RESET operation complete sym1:2:0: ABORT operation started. sym1:2:0: ABORT operation timed-out. sym1:2:0: HOST RESET operation started. sym1: SCSI BUS has been reset === END TEST 2 CONSOLE LOG SNIPPET === I wonder if anyone around can test with some more Quantum Atlas drives against a 53c1010. Cheers, Lance Dryden Kai OM wrote: > > The device I have attached to my LSIU160 is a Quantum Atlas 10K II. > Model ATLAS10K2-TY734J. > I wonder if it's an issue with 53c1010 variants in general, or maybe > only when connected to certain devices? > > Can you test a different drive on the 53c1010 controller?