From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ronen Shitrit Date: Wed, 25 Aug 2004 15:30:20 +0300 Subject: [U-Boot-Users] graphic card support Message-ID: <412C865C.4020305@il.marvell.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi I'm planning to use a graphic card on my U-Boot, I have 2 different PCI graphic card I can use: ATI 3D RAGE II, Cirrus Logic 5464 and invidia RIVA TNT2. I was wondering what should I do in order to use the PCI graphic card by the U-Boot. Should I add only few defined to my config file and the video card will be PNP as in the network cards?? Do I need to support any special init code for the video card? or Does the U-Boot has it?? ( Which platform is a good reference for using graphic card as a frame buffer/video??) Regards -- Ronen Shitrit M.S.I.L 6 Ha'mada St. Industrial Area P.O.Box 692 Yokneam 20692 ISRAEL Tel: +972-4-9091500 Fax: +972-4-9091501 _____________________________________________________________ This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone, or by e-mail and delete the message from your computer.