All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Steiner <fsteiner-mail@bio.ifi.lmu.de>
To: Mark Broadbent <markb@wetlettuce.com>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.8.1: ip auto-config accepts wrong packages
Date: Wed, 25 Aug 2004 16:41:28 +0200	[thread overview]
Message-ID: <412CA518.7090109@bio.ifi.lmu.de> (raw)
In-Reply-To: <1093439062.25506.12.camel@mbpc.signal.qinetiq.com>

Hi Mark,

Mark Broadbent wrote:
> On Wed, 2004-08-25 at 10:40, Frank Steiner wrote:

> Try enabling the debug messaging in the ipconfig code.  Edit the file
> net/ipv4/ipconfig.c just below the #include's and change the line 
> 
> #undef IPCONFIG_DEBUG
> 
> to
> 
> #define IPCONFIG_DEBUG
> 
> and rebuild.  Post the outputs from both machines when you see this
> effect again.

the output is exactly the same on both machines! On the one machine that
went through (because it got the IP first) I got the output from dmesg,
printed it and compared it to the both boot screens. And they are really
identical.

I didn't see any option (or "extension") that contains the mac address.
Could that be the problem? Do I have to tell the server that the mac
address must be in the request-list?

cu,
Frank



IP-Config: Entered.
IP-Config: eth0 UP (able=1, xid=07196018)
Sending DHCP requests .DHCP: Sending message type 1
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
DHCP: Got message type 2
DHCP: Offered address 141.84.1.168 by server 141.84.1.132
DHCP/BOOTP: Got extension 53: 02
DHCP/BOOTP: Got extension 54: 8d 54 01 84
DHCP/BOOTP: Got extension 51: 00 00 1c 20
DHCP/BOOTP: Got extension 1: ff ff ff 80
DHCP/BOOTP: Got extension 3: 8d 54 01 82
DHCP/BOOTP: Got extension 6: 81 bb d6 87
DHCP/BOOTP: Got extension 12: 72 61 64 6f
DHCP/BOOTP: Got extension 15: 62 69 6f 2e 69 66 69 2e 6c 6d 75 2e 64 65
DHCP/BOOTP: Got extension 17: 2f
DHCP/BOOTP: Got extension 28: 8d 54 01 ff
DHCP/BOOTP: Got extension 208: f1 00 74 7e
DHCP/BOOTP: Got extension 209: 70 78 65 6c 69 6e 75 78 2e 63 66 67 2e 72 61 64 6f
DHCP/BOOTP: Got extension 210: 68 6f 73 74 73 2f
,DHCP: Sending message type 3
DHCP: Got message type 5
DHCP/BOOTP: Got extension 53: 05
DHCP/BOOTP: Got extension 54: 8d 54 01 84
DHCP/BOOTP: Got extension 51: 00 00 1c 20
DHCP/BOOTP: Got extension 1: ff ff ff 80
DHCP/BOOTP: Got extension 3: 8d 54 01 82
DHCP/BOOTP: Got extension 6: 81 bb d6 87
DHCP/BOOTP: Got extension 12: 72 61 64 6f
DHCP/BOOTP: Got extension 15: 62 69 6f 2e 69 66 69 2e 6c 6d 75 2e 64 65
DHCP/BOOTP: Got extension 17: 2f
DHCP/BOOTP: Got extension 28: 8d 54 01 ff
DHCP/BOOTP: Got extension 208: f1 00 74 7e
DHCP/BOOTP: Got extension 209: 70 78 65 6c 69 6e 75 78 2e 63 66 67 2e 72 61 64 6f
DHCP/BOOTP: Got extension 210: 68 6f 73 74 73 2f
  OK
IP-Config: Got DHCP answer from xxx.xxx.1.132, my address is xxx.xxx.1.168
IP-Config: Complete:
       device=eth0, addr=xxx.xxx.1.168, mask=255.255.255.128, gw=xxx.xxx.1.130,
      host=rado, domain=xxx nis-domain=(none),
      bootserver=xxx.xxx.1.132, rootserver=xxx.xxx.1.132, rootpath=/



-- 
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049


  reply	other threads:[~2004-08-25 14:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-25  9:40 2.6.8.1: ip auto-config accepts wrong packages Frank Steiner
2004-08-25 13:04 ` Mark Broadbent
2004-08-25 14:41   ` Frank Steiner [this message]
2004-08-25 15:47     ` Mark Broadbent
2004-08-26  6:39       ` Frank Steiner
2004-08-26 10:31       ` Frank Steiner
2004-08-26 16:17         ` Randy.Dunlap
2004-08-27 11:42           ` Frank Steiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=412CA518.7090109@bio.ifi.lmu.de \
    --to=fsteiner-mail@bio.ifi.lmu.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markb@wetlettuce.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.