From: Douglas Gilbert <dougg@torque.net>
To: linux-scsi@vger.kernel.org
Cc: James.Bottomley@SteelEye.com
Subject: [PATCH] scsi_debug 2.6.9-rc1
Date: Sun, 29 Aug 2004 23:06:59 +1000 [thread overview]
Message-ID: <4131D4F3.3060005@torque.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 606 bytes --]
To check descriptor format sense data handling we need a source.
Clean up some other problems and improve support for st.
Changes:
- add 'dsense' option to generate descriptor sense data
format (default still fixed format)
- correct unit attention generation (only INQUIRY, REQUEST_SENSE
and REPORT_LUNS ignore it)
- better information sent to log in "noisy" mode (i.e. opts=1)
- correct and expand standard INQUIRY response, include version
descriptors
- filter MODE_SENSE command so that subpage!=0 generates error
- add REWIND (SSC) command support (NOP)
Doug Gilbert
[-- Attachment #2: sdebug269rc1_174.diff --]
[-- Type: text/x-patch, Size: 10440 bytes --]
--- linux/drivers/scsi/scsi_debug.c 2004-08-14 21:12:43.000000000 +1000
+++ linux/drivers/scsi/scsi_debug.c269rc1_174 2004-08-29 22:36:05.000000000 +1000
@@ -55,8 +55,8 @@
#include "scsi_logging.h"
#include "scsi_debug.h"
-#define SCSI_DEBUG_VERSION "1.73"
-static const char * scsi_debug_version_date = "20040518";
+#define SCSI_DEBUG_VERSION "1.74"
+static const char * scsi_debug_version_date = "20040829";
/* Additional Sense Code (ASC) used */
#define NO_ADDED_SENSE 0x0
@@ -82,8 +82,9 @@
#define DEF_EVERY_NTH 0
#define DEF_NUM_PARTS 0
#define DEF_OPTS 0
-#define DEF_SCSI_LEVEL 3
+#define DEF_SCSI_LEVEL 4 /* SPC-2 */
#define DEF_PTYPE 0
+#define DEF_D_SENSE 0
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
@@ -114,6 +115,7 @@
static int scsi_debug_opts = DEF_OPTS;
static int scsi_debug_scsi_level = DEF_SCSI_LEVEL;
static int scsi_debug_ptype = DEF_PTYPE; /* SCSI peripheral type (0==disk) */
+static int scsi_debug_dsense = DEF_D_SENSE;
static int scsi_debug_cmnd_count = 0;
@@ -277,7 +279,7 @@
int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
{
unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
- int block, upper_blk, num;
+ int block, upper_blk, num, k;
unsigned char *buff;
int errsts = 0;
int target = SCpnt->device->id;
@@ -305,7 +307,12 @@
bufflen = SDEBUG_SENSE_LEN;
}
-
+ if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmd) {
+ printk(KERN_INFO "scsi_debug: cmd ");
+ for (k = 0, num = SCpnt->cmd_len; k < num; ++k)
+ printk("%02x ", (int)cmd[k]);
+ printk("\n");
+ }
if(target == sdebug_driver_template.this_id) {
printk(KERN_INFO "scsi_debug: initiator's id used as "
"target!\n");
@@ -331,14 +338,10 @@
}
switch (*cmd) {
- case INQUIRY: /* mandatory */
+ case INQUIRY: /* mandatory, ignore unit attention */
errsts = resp_inquiry(cmd, target, buff, bufflen, devip);
break;
- case REQUEST_SENSE: /* mandatory */
- /* Since this driver indicates autosense by placing the
- * sense buffer in the scsi_cmnd structure in the response
- * (when SAM_STAT_CHECK_CONDITION is set), the mid level
- * shouldn't need to call REQUEST_SENSE */
+ case REQUEST_SENSE: /* mandatory, ignore unit attention */
if (devip) {
sbuff = devip->sense_buff;
memcpy(buff, sbuff, (bufflen < SDEBUG_SENSE_LEN) ?
@@ -349,20 +352,24 @@
buff[0] = 0x70;
}
break;
+ case REZERO_UNIT: /* actually this is REWIND for SSC */
case START_STOP:
errsts = check_reset(SCpnt, devip);
+ memset(buff, 0, bufflen);
break;
case ALLOW_MEDIUM_REMOVAL:
if ((errsts = check_reset(SCpnt, devip)))
break;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
- printk("\tMedium removal %s\n",
- cmd[4] ? "inhibited" : "enabled");
+ printk(KERN_INFO "scsi_debug: Medium removal %s\n",
+ cmd[4] ? "inhibited" : "enabled");
break;
case SEND_DIAGNOSTIC: /* mandatory */
+ errsts = check_reset(SCpnt, devip);
memset(buff, 0, bufflen);
break;
case TEST_UNIT_READY: /* mandatory */
+ errsts = check_reset(SCpnt, devip);
memset(buff, 0, bufflen);
break;
case RESERVE:
@@ -429,7 +436,7 @@
errsts = check_condition_result;
}
break;
- case REPORT_LUNS:
+ case REPORT_LUNS: /* mandatory, ignore unit attention */
errsts = resp_report_luns(cmd, buff, bufflen, devip);
break;
case WRITE_16:
@@ -469,14 +476,20 @@
break;
case MODE_SENSE:
case MODE_SENSE_10:
+ if ((errsts = check_reset(SCpnt, devip)))
+ break;
errsts = resp_mode_sense(cmd, target, buff, bufflen, devip);
break;
case SYNCHRONIZE_CACHE:
+ errsts = check_reset(SCpnt, devip);
memset(buff, 0, bufflen);
break;
default:
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
+ "supported\n", *cmd);
if ((errsts = check_reset(SCpnt, devip)))
- break;
+ break; /* Unit attention takes precedence */
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_OPCODE, 0, 18);
errsts = check_condition_result;
break;
@@ -496,6 +509,9 @@
static int check_reset(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip)
{
if (devip->reset) {
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: Reporting Unit "
+ "attention: power on reset\n");
devip->reset = 0;
mk_sense_buffer(devip, UNIT_ATTENTION, POWERON_RESET, 0, 18);
return check_condition_result;
@@ -503,7 +519,7 @@
return 0;
}
-#define SDEBUG_LONG_INQ_SZ 58
+#define SDEBUG_LONG_INQ_SZ 96
#define SDEBUG_MAX_INQ_ARR_SZ 128
static const char * vendor_id = "Linux ";
@@ -593,11 +609,21 @@
/* drops through here for a standard inquiry */
arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */
arr[2] = scsi_debug_scsi_level;
+ arr[3] = 2; /* response_data_format==2 */
arr[4] = SDEBUG_LONG_INQ_SZ - 5;
+ arr[6] = 0x1; /* claim: ADDR16 */
arr[7] = 0x3a; /* claim: WBUS16, SYNC, LINKED + CMDQUE */
memcpy(&arr[8], vendor_id, 8);
memcpy(&arr[16], product_id, 16);
memcpy(&arr[32], product_rev, 4);
+ /* version descriptors (2 bytes each) follow */
+ arr[58] = 0x0; arr[59] = 0x40; /* SAM-2 */
+ arr[60] = 0x2; arr[61] = 0x60; /* SPC-2 */
+ if (scsi_debug_ptype == 0) {
+ arr[62] = 0x1; arr[63] = 0x80; /* SBC */
+ } else if (scsi_debug_ptype == 1) {
+ arr[62] = 0x2; arr[63] = 0x00; /* SSC */
+ }
memcpy(buff, arr, min_len);
return 0;
}
@@ -660,6 +686,8 @@
unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
+ if (scsi_debug_dsense)
+ ctrl_m_pg[2] |= 0x4;
memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(ctrl_m_pg) - 2);
@@ -683,7 +711,7 @@
struct sdebug_dev_info * devip)
{
unsigned char dbd;
- int pcontrol, pcode;
+ int pcontrol, pcode, subpcode;
unsigned char dev_spec;
int alloc_len, msense_6, offset, len;
unsigned char * ap;
@@ -695,11 +723,9 @@
dbd = cmd[1] & 0x8;
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
+ subpcode = cmd[3];
msense_6 = (MODE_SENSE == cmd[0]);
alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]);
- /* printk(KERN_INFO "msense: dbd=%d pcontrol=%d pcode=%d "
- "msense_6=%d alloc_len=%d\n", dbd, pcontrol, pcode, "
- "msense_6, alloc_len); */
if (bufflen < alloc_len)
printk(KERN_INFO "scsi_debug: mode_sense: bufflen=%d "
"< alloc_length=%d\n", bufflen, alloc_len);
@@ -720,6 +746,11 @@
}
ap = arr + offset;
+ if (0 != subpcode) { /* TODO: Control Extension page */
+ mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
+ 0, 18);
+ return check_condition_result;
+ }
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
len = resp_err_recov_pg(ap, pcontrol, target);
@@ -1023,13 +1054,23 @@
sbuff = devip->sense_buff;
memset(sbuff, 0, SDEBUG_SENSE_LEN);
- if (inbandLen > SDEBUG_SENSE_LEN)
- inbandLen = SDEBUG_SENSE_LEN;
- sbuff[0] = 0x70;
- sbuff[2] = key;
- sbuff[7] = (inbandLen > 7) ? (inbandLen - 8) : 0;
- sbuff[12] = asc;
- sbuff[13] = asq;
+ if (scsi_debug_dsense) {
+ sbuff[0] = 0x72; /* descriptor, current */
+ sbuff[1] = key;
+ sbuff[2] = asc;
+ sbuff[3] = asq;
+ } else {
+ if (inbandLen > SDEBUG_SENSE_LEN)
+ inbandLen = SDEBUG_SENSE_LEN;
+ sbuff[0] = 0x70; /* fixed, current */
+ sbuff[2] = key;
+ sbuff[7] = (inbandLen > 7) ? (inbandLen - 8) : 0;
+ sbuff[12] = asc;
+ sbuff[13] = asq;
+ }
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ printk(KERN_INFO "scsi_debug: [sense_key,asc,ascq]: "
+ "[0x%x,0x%x,0x%x]\n", key, asc, asq);
}
static int scsi_debug_abort(struct scsi_cmnd * SCpnt)
@@ -1230,17 +1271,11 @@
struct sdebug_dev_info * devip,
done_funct_t done, int scsi_result, int delta_jiff)
{
- int k, num;
-
if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmnd) {
- printk(KERN_INFO "scsi_debug: cmd ");
- for (k = 0, num = cmnd->cmd_len; k < num; ++k)
- printk("%02x ", (int)cmnd->cmnd[k]);
- printk("\n");
if (scsi_result) {
struct scsi_device * sdp = cmnd->device;
- printk(KERN_INFO "scsi_debug: ... <%u %u %u %u> "
+ printk(KERN_INFO "scsi_debug: <%u %u %u %u> "
"non-zero result=0x%x\n", sdp->host->host_no,
sdp->channel, sdp->id, sdp->lun, scsi_result);
}
@@ -1296,6 +1331,7 @@
module_param_named(add_host, scsi_debug_add_host, int, 0); /* perm=0644 */
module_param_named(delay, scsi_debug_delay, int, 0); /* perm=0644 */
module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, 0);
+module_param_named(dsense, scsi_debug_dsense, int, 0);
module_param_named(every_nth, scsi_debug_every_nth, int, 0);
module_param_named(max_luns, scsi_debug_max_luns, int, 0);
module_param_named(num_parts, scsi_debug_num_parts, int, 0);
@@ -1312,13 +1348,14 @@
MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)");
MODULE_PARM_DESC(delay, "# of jiffies to delay response(def=1)");
MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs");
+MODULE_PARM_DESC(dsense, "use descriptor sense format(def: fixed)");
MODULE_PARM_DESC(every_nth, "timeout every nth command(def=100)");
MODULE_PARM_DESC(max_luns, "number of SCSI LUNs per target to simulate");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of SCSI targets per host to simulate");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->...");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
-MODULE_PARM_DESC(scsi_level, "SCSI level to simulate");
+MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=4[SPC-2])");
static char sdebug_info[256];
@@ -1452,6 +1489,24 @@
}
DRIVER_ATTR(ptype, S_IRUGO | S_IWUSR, sdebug_ptype_show, sdebug_ptype_store);
+static ssize_t sdebug_dsense_show(struct device_driver * ddp, char * buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dsense);
+}
+static ssize_t sdebug_dsense_store(struct device_driver * ddp,
+ const char * buf, size_t count)
+{
+ int n;
+
+ if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ scsi_debug_dsense = n;
+ return count;
+ }
+ return -EINVAL;
+}
+DRIVER_ATTR(dsense, S_IRUGO | S_IWUSR, sdebug_dsense_show,
+ sdebug_dsense_store);
+
static ssize_t sdebug_num_tgts_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_tgts);
reply other threads:[~2004-08-29 13:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4131D4F3.3060005@torque.net \
--to=dougg@torque.net \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.