From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mahmood Naderan Date: Wed, 01 Sep 2010 08:16:41 +0000 Subject: Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors Message-Id: <414392.2418.qm@web50008.mail.re2.yahoo.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============3739733468676070880==" List-Id: References: <929339.59525.qm@web50002.mail.re2.yahoo.com> In-Reply-To: <929339.59525.qm@web50002.mail.re2.yahoo.com> To: lm-sensors@vger.kernel.org --===============3739733468676070880== Content-Type: multipart/alternative; boundary="0-1292337673-1283329001=:2418" --0-1292337673-1283329001=:2418 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable >sudo /etc/init.d/lm_sensors restart=0A=A0=0Amahmood@localhost:~$ sudo /etc= /init.d/lm-sensors restart=0A.: 39: Can't open /etc/init.d/functions=0A=0AN= ote there is no lm_sensors. I have lm-sensors=0A=A0=0A// Naderan *Mahmood;= =0A=0A=0A=0A=0A________________________________=0AFrom: Nikola Pajkovsky =0ATo: lm-sensors@lm-sensors.org=0ASent: Wed, September = 1, 2010 12:41:56 PM=0ASubject: Re: [lm-sensors] lmsensors doesn't detect co= re-i7 sensors=0A=0AOn 09/01/2010 10:03 AM, Mahmood Naderan wrote:=0A>=A0 >s= udo ./sensors-detect=0A> Yes=0A> Intel Core family thermal sensor... Succes= s!=0A> (driver `coretemp')=0A> ...=0A> Now follows a summary of the probes = I have just done.=0A> Just press ENTER to continue:=0A> Driver `it87':=0A> = * ISA bus, address 0x290=0A> Chip `ITE IT8720F Super IO Sensors' (confidenc= e: 9)=0A> Driver `coretemp':=0A> * Chip `Intel Core family thermal sensor' = (confidence: 9)=0A> Do you want to generate /etc/sysconfig/lm_sensors? (yes= /NO): y=0A> Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors=0A> fo= r initialization at boot time.=0A> You should now start the lm_sensors serv= ice to load the required=0A> kernel modules.=0A> I then copy that file and = restart=0A> mahmood@localhost:~$ ls /etc/init= .d/lm*=0A> /etc/init.d/lm-sensors=0A> However this is what I see again=0A> = mahmood@localhost:~$ sudo sensors=0A> it8720-= isa-0290=0A> Adapter: ISA adapter=0A> in0: +0.86 V (min =3D +0.00 V, max = =3D +4.08 V)=0A> in1: +1.58 V (min =3D +0.00 V, max =3D +4.08 V)=0A> in2: += 3.39 V (min =3D +0.00 V, max =3D +4.08 V)=0A> in3: +3.02 V (min =3D +0.00 V= , max =3D +4.08 V)=0A> in4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V) ALAR= M=0A> in5: +3.12 V (min =3D +0.00 V, max =3D +4.08 V)=0A> in6: +0.02 V (min= =3D +0.00 V, max =3D +4.08 V) ALARM=0A> in7: +2.16 V (min =3D +0.00 V, max= =3D +4.08 V)=0A> Vbat: +3.10 V=0A> fan1: 1638 RPM (min =3D 10 RPM)=0A> fan= 2: 618 RPM (min =3D 0 RPM)=0A> fan3: 1278 RPM (min =3D 10 RPM)=0A> fan4: 12= 03 RPM (min =3D 0 RPM)=0A> temp1: +35.0=C2=B0C (low =3D +127.0=C2=B0C, high= =3D +127.0=C2=B0C) sensor =3D thermistor=0A> temp2: +25.0=C2=B0C (low =3D = +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor=0A> temp3: +33= .0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C) sensor =3D thermis= tor=0A> cpu0_vid: +0.313 V=0A> No core-i7.... :(=0A> *// Naderan *Mahmood;*= =0A>=0Asudo /etc/init.d/lm_sensors restart=0A=0A=0A>=0A>-------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ----------------------------------------------- ----------------------=0A>-=0A--=0A> *From:* Nikola Pajkovsky =0A> *To:* lm-sensors@lm-sensors.org=0A> *Sent:* Wed, September 1, = 2010 12:23:10 PM=0A> *Subject:* Re: [lm-sensors] lmsensors doesn't detect c= ore-i7 sensors=0A>=0A> sudo ./sensors-detect=0A>=0A> On 09/01/2010 09:46 AM= , Mahmood Naderan wrote:=0A>=A0 > >just svn update # not needed if you have= fresh checkout=0A>=A0 > To double check and be sure again:=0A>=A0 > mahmoo= d@localhost:~$ svn update 5857=0A>=A0 > Skipp= ed '5857'=0A>=A0 >=0A>=A0 > Then:=0A>=A0 >=0A>=A0 >=0A>=A0 > mahmood@localh= ost:~$ cd =0A>lm-sensors/prog/detect/=0A>=A0 = > mahmood@localhost:~/lm-sensors/prog/detect$ =0A> sudo sensors-detect=0A>=A0 > # sensors-detect r= evision 5818 (2010-01-18 17:22:07 +0100)=0A>=A0 > # System: Gigabyte Techno= logy Co., Ltd. P55-USB3=0A>=A0 > This program will help you determine which= kernel modules you need=0A>=A0 > to load to use lm_sensors most effectivel= y. It is generally safe=0A>=A0 > and recommended to accept the default answ= ers to all questions,=0A>=A0 > unless you know what you're doing.=0A>=A0 > = Some south bridges, CPUs or memory controllers contain embedded sensors.=0A= >=A0 > Do you want to scan for them? This is totally safe. (YES/no): y=0A>= =A0 > Silicon Integrated Systems SIS5595... No=0A>=A0 > VIA VT82C686 Integr= ated Sensors... No=0A>=A0 > VIA VT8231 Integrated Sensors... No=0A>=A0 > AM= D K8 thermal sensors... No=0A>=A0 > AMD Family 10h thermal sensors... No=0A= >=A0 > AMD Family 11h thermal sensors... No=0A>=A0 > Intel Core family ther= mal sensor... No=0A>=A0 > Intel Atom thermal sensor... No=0A>=A0 > Intel AM= B FB-DIMM thermal sensor... No=0A>=A0 > VIA C7 thermal sensor... No=0A>=A0 = > VIA Nano thermal sensor... No=0A>=A0 > Some Super I/O chips contain embed= ded sensors. We have to write to=0A>=A0 > standard I/O ports to probe them.= This is usually safe.=0A>=A0 > Do you want to scan for Super I/O sensors? = (YES/no): y=0A>=A0 > Probing for Super-I/O at 0x2e/0x2f=0A>=A0 > Trying fam= ily `National Semiconductor'... No=0A>=A0 > Trying family `SMSC'... No=0A>= =A0 > Trying family `VIA/Winbond/Nuvoton/Fintek'... No=0A>=A0 > Trying fami= ly `ITE'... Yes=0A>=A0 > Found `ITE IT8720F Super IO Sensors' Success!=0A>= =A0 > (address 0x290, driver `it87')=0A>=A0 > Probing for Super-I/O at 0x4e= /0x4f=0A>=A0 > Trying family `National Semiconductor'... No=0A>=A0 > Trying= family `SMSC'... No=0A>=A0 > Trying family `VIA/Winbond/Nuvoton/Fintek'...= No=0A>=A0 > Trying family `ITE'... No=0A>=A0 > Some systems (mainly server= s) implement IPMI, a set of common interfaces=0A>=A0 > through which system= health data may be retrieved, amongst other things.=0A>=A0 > We first try = to get the information from SMBIOS. If we don't find it=0A>=A0 > there, we = have to read from arbitrary I/O ports to probe for such=0A>=A0 > interfaces= . This is normally safe. Do you want to scan for IPMI=0A>=A0 > interfaces? = (YES/no): y=0A>=A0 > Probing for `IPMI BMC KCS' at 0xca0... No=0A>=A0 > Pro= bing for `IPMI BMC SMIC' at 0xca8... No=0A>=A0 > Some hardware monitoring c= hips are accessible through the ISA I/O ports.=0A>=A0 > We have to write to= arbitrary I/O ports to probe them. This is usually=0A>=A0 > safe though. Y= es, you do have ISA I/O ports even if you do not have any=0A>=A0 > ISA slot= s! Do you want to scan the ISA I/O ports? (yes/NO): y=0A>=A0 > Probing for = `National Semiconductor LM78' at 0x290... No=0A>=A0 > Probing for `National= Semiconductor LM79' at 0x290... No=0A>=A0 > Probing for `Winbond W83781D' = at 0x290... No=0A>=A0 > Probing for `Winbond W83782D' at 0x290... No=0A>=A0= > Lastly, we can probe the I2C/SMBus adapters for connected hardware=0A>= =A0 > monitoring devices. This is the most risky part, and while it works= =0A>=A0 > reasonably well on most systems, it has been reported to cause tr= ouble=0A>=A0 > on some systems.=0A>=A0 > Do you want to probe the I2C/SMBus= adapters now? (YES/no): y=0A>=A0 > Found unknown SMBus adapter 8086:3b30 a= t 0000:00:1f.3.=0A>=A0 > Sorry, no supported PCI bus adapters found.=0A>=A0= > Module i2c-dev loaded successfully.=0A>=A0 > Now follows a summary of th= e probes I have just done.=0A>=A0 > Just press ENTER to continue:=0A>=A0 > = Driver `it87':=0A>=A0 > * ISA bus, address 0x290=0A>=A0 > Chip `ITE IT8720F= Super IO Sensors' (confidence: 9)=0A>=A0 > To load everything that is need= ed, add this to /etc/modules:=0A>=A0 > #----cut here----=0A>=A0 > # Chip dr= ivers=0A>=A0 > it87=0A>=A0 > #----cut here----=0A>=A0 > If you have some dr= ivers built into your kernel, the list above will=0A>=A0 > contain too many= modules. Skip the appropriate ones!=0A>=A0 > Do you want to add these line= s automatically to /etc/modules? (yes/NO)yes=0A>=A0 > Successful!=0A>=A0 > = Monitoring programs won't work until the needed modules are=0A>=A0 > loaded= . You may want to run '/etc/init.d/module-init-tools start'=0A>=A0 > to loa= d them.=0A>=A0 > Unloading i2c-dev... OK=0A>=A0 >=0A>=A0 > But that didn't = help. See the sensors output:=0A>=A0 >=0A>=A0 > mahmood@localhost:~/lm-sens= ors/prog/detect$ =0A> s= udo sensors=0A>=A0 > it8720-isa-0290=0A>=A0 > Adapter: ISA adapter=0A>=A0 >= in0: +0.86 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > in1: +1.58 V (min= =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > in2: +3.39 V (min =3D +0.00 V, max = =3D +4.08 V)=0A>=A0 > in3: +3.02 V (min =3D +0.00 V, max =3D +4.08 V)=0A>= =A0 > in4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V) ALARM=0A>=A0 > in5: += 3.12 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > in6: +0.02 V (min =3D +0= .00 V, max =3D +4.08 V) ALARM=0A>=A0 > in7: +2.16 V (min =3D +0.00 V, max = =3D +4.08 V)=0A>=A0 > Vbat: +3.10 V=0A>=A0 > fan1: 1683 RPM (min =3D 10 RPM= )=0A>=A0 > fan2: 644 RPM (min =3D 0 RPM)=0A>=A0 > fan3: 1280 RPM (min =3D 1= 0 RPM)=0A>=A0 > fan4: 1203 RPM (min =3D 0 RPM)=0A>=A0 > temp1: +35.0=C2=B0C= (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor=0A>= =A0 > temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) s= ensor =3D thermistor=0A>=A0 > temp3: +33.0=C2=B0C (low =3D +127.0=C2=B0C, h= igh =3D +90.0=C2=B0C) sensor =3D thermistor=0A>=A0 > cpu0_vid: +0.313 V=0A>= =A0 >=0A>=A0 > Any idea? Thanks,=0A>=A0 > *// Naderan *Mahmood;*=0A>=A0 >= =0A>=A0 >=0A>=A0 > =0A>----------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= --------------=0A> ------------------=0A----=0A> --=0A>=A0 > *From:* Nikola= Pajkovsky >=0A>=A0 > *To:= * lm-sensors@lm-sensors.org =0A>=A0 > *Se= nt:* Wed, September 1, 2010 12:08:07 PM=0A>=A0 > *Subject:* Re: [lm-sensors= ] lmsensors doesn't detect core-i7 sensors=0A>=A0 >=0A>=A0 > On 09/01/2010 = 09:30 AM, Mahmood Naderan wrote:=0A>=A0 > > Here is what I did:=0A>=A0 > > = mahmood@localhost:~$ svn checkout =0A>http://= lm-sensors.org/svn/lm-sensors/trunk lm-sensors=0A>=A0 > > ...=0A>=A0 > > Ch= ecked out revision 5857.=0A>=A0 > Yes=0A>=A0 >=0A>=A0 > > mahmood@localhost= :~$ svn update =0A>http://lm-sensors.org/svn/= lm-sensors/trunk lm-sensors=0A>=A0 > > Skipped 'http://lm-sensors.org/svn/l= m-sensors/trunk'=0A>=A0 > > At revision 5857.=0A>=A0 > > Summary of conflic= ts:=0A>=A0 > > Skipped paths: 1=0A>=A0 > > Is that what you meant?=0A>=A0 >= > *// Naderan *Mahmood;*=0A>=A0 > just svn update # not needed if you have= fresh checkout=0A>=A0 >=0A>=A0 > in lm-sensors/prog/detect run sensors-det= ect and it should find your =0Acore-i7=0A>=A0 >=0A>=A0 > >=0A>=A0 > >=0A>= =A0 > > =0A>---------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---=0A> ----------------=0A--=0A> ----=0A>=A0 > --=0A>=A0 > > *From:* Nikol= a Pajkovsky =0A>>>=0A>=A0 > > *To:* lm-senso= rs@lm-sensors.org =0A>>=0A>=A0 > > *Sent:* Wed,= September 1, 2010 11:49:03 AM=0A>=A0 > > *Subject:* Re: [lm-sensors] lmsen= sors doesn't detect core-i7 sensors=0A>=A0 > >=0A>=A0 > > On 09/01/2010 08:= 38 AM, Mahmood Naderan wrote:=0A>=A0 > > > Dear all,=0A>=A0 > > >=0A>=A0 > = > > I ran sensors-detect to detect Core-i7 temperatures but it doesn't show= =0A>them. Here is the output of sensors-detect:=0A>=A0 > > >=0A>=A0 > > >= =0A>=A0 > > > mahmood@localhost:~$ sudo sensors-detect=0A>=A0 > > > # senso= rs-detect revision 5818 (2010-01-18 17:22:07 +0100)=0A>=A0 > > > # System: = Gigabyte Technology Co., Ltd. P55-USB3=0A>=A0 > > >=0A>=A0 > > > This progr= am will help you determine which kernel modules you need=0A>=A0 > > > to lo= ad to use lm_sensors most effectively. It is generally safe=0A>=A0 > > > an= d recommended to accept the default answers to all questions,=0A>=A0 > > > = unless you know what you're doing.=0A>=A0 > > >=0A>=A0 > > > Some south bri= dges, CPUs or memory controllers contain embedded =0Asensors.=0A>=A0 > > > = Do you want to scan for them? This is totally safe. (YES/no): y=0A>=A0 > > = > Silicon Integrated Systems SIS5595... No=0A>=A0 > > > VIA VT82C686 Integr= ated Sensors... No=0A>=A0 > > > VIA VT8231 Integrated Sensors... No=0A>=A0 = > > > AMD K8 thermal sensors... No=0A>=A0 > > > AMD Family 10h thermal sens= ors... No=0A>=A0 > > > AMD Family 11h thermal sensors... No=0A>=A0 > > > In= tel Core family thermal sensor... No=0A>=A0 > > > Intel Atom thermal sensor= ... No=0A>=A0 > > > Intel AMB FB-DIMM thermal sensor... No=0A>=A0 > > > VIA= C7 thermal sensor... No=0A>=A0 > > > VIA Nano thermal sensor... No=0A>=A0 = > > >=0A>=A0 > > > Some Super I/O chips contain embedded sensors. We have t= o write to=0A>=A0 > > > standard I/O ports to probe them. This is usually s= afe.=0A>=A0 > > > Do you want to scan for Super I/O sensors? (YES/no): y=0A= >=A0 > > > Probing for Super-I/O at 0x2e/0x2f=0A>=A0 > > > Trying family `N= ational Semiconductor'... No=0A>=A0 > > > Trying family `SMSC'... No=0A>=A0= > > > Trying family `VIA/Winbond/Nuvoton/Fintek'... No=0A>=A0 > > > Trying= family `ITE'... Yes=0A>=A0 > > > Found `ITE IT8720F Super IO Sensors' Succ= ess!=0A>=A0 > > > (address 0x290, driver `it87')=0A>=A0 > > > Probing for S= uper-I/O at 0x4e/0x4f=0A>=A0 > > > Trying family `National Semiconductor'..= . No=0A>=A0 > > > Trying family `SMSC'... No=0A>=A0 > > > Trying family `VI= A/Winbond/Nuvoton/Fintek'... No=0A>=A0 > > > Trying family `ITE'... No=0A>= =A0 > > >=0A>=A0 > > > Some systems (mainly servers) implement IPMI, a set = of common =0Ainterfaces=0A>=A0 > > > through which system health data may b= e retrieved, amongst other =0Athings.=0A>=A0 > > > We first try to get the = information from SMBIOS. If we don't find it=0A>=A0 > > > there, we have to= read from arbitrary I/O ports to probe for such=0A>=A0 > > > interfaces. T= his is normally safe. Do you want to scan for IPMI=0A>=A0 > > > interfaces?= (YES/no): y=0A>=A0 > > > Probing for `IPMI BMC KCS' at 0xca0... No=0A>=A0 = > > > Probing for `IPMI BMC SMIC' at 0xca8... No=0A>=A0 > > >=0A>=A0 > > > = Some hardware monitoring chips are accessible through the ISA I/O =0Aports.= =0A>=A0 > > > We have to write to arbitrary I/O ports to probe them. This i= s usually=0A>=A0 > > > safe though. Yes, you do have ISA I/O ports even if = you do not have any=0A>=A0 > > > ISA slots! Do you want to scan the ISA I/O= ports? (yes/NO): y=0A>=A0 > > > Probing for `National Semiconductor LM78' = at 0x290... No=0A>=A0 > > > Probing for `National Semiconductor LM79' at 0x= 290... No=0A>=A0 > > > Probing for `Winbond W83781D' at 0x290... No=0A>=A0 = > > > Probing for `Winbond W83782D' at 0x290... No=0A>=A0 > > >=0A>=A0 > > = > Lastly, we can probe the I2C/SMBus adapters for connected hardware=0A>=A0= > > > monitoring devices. This is the most risky part, and while it works= =0A>=A0 > > > reasonably well on most systems, it has been reported to caus= e trouble=0A>=A0 > > > on some systems.=0A>=A0 > > > Do you want to probe t= he I2C/SMBus adapters now? (YES/no): y=0A>=A0 > > > Found unknown SMBus ada= pter 8086:3b30 at 0000:00:1f.3.=0A>=A0 > > > Sorry, no supported PCI bus ad= apters found.=0A>=A0 > > > Module i2c-dev loaded successfully.=0A>=A0 > > >= =0A>=A0 > > > Now follows a summary of the probes I have just done.=0A>=A0 = > > > Just press ENTER to continue:=0A>=A0 > > >=0A>=A0 > > > Driver `it87'= :=0A>=A0 > > > * ISA bus, address 0x290=0A>=A0 > > > Chip `ITE IT8720F Supe= r IO Sensors' (confidence: 9)=0A>=A0 > > >=0A>=A0 > > > To load everything = that is needed, add this to /etc/modules:=0A>=A0 > > > #----cut here----=0A= >=A0 > > > # Chip drivers=0A>=A0 > > > it87=0A>=A0 > > > #----cut here----= =0A>=A0 > > > If you have some drivers built into your kernel, the list abo= ve will=0A>=A0 > > > contain too many modules. Skip the appropriate ones!= =0A>=A0 > > >=0A>=A0 > > > Do you want to add these lines automatically to = /etc/modules? =0A>(yes/NO)yes=0A>=A0 > > > Successful!=0A>=A0 > > >=0A>=A0 = > > > Monitoring programs won't work until the needed modules are=0A>=A0 > = > > loaded. You may want to run '/etc/init.d/module-init-tools start'=0A>= =A0 > > > to load them.=0A>=A0 > > >=0A>=A0 > > > Unloading i2c-dev... OK= =0A>=A0 > > >=0A>=A0 > > >=0A>=A0 > > > Then I ran sensors:=0A>=A0 > > >=0A= >=A0 > > > mahmood@localhost:~$ sudo sensors=0A>=A0 > > > it8720-isa-0290= =0A>=A0 > > > Adapter: ISA adapter=0A>=A0 > > > in0: +0.86 V (min =3D +0.00= V, max =3D +4.08 V)=0A>=A0 > > > in1: +1.58 V (min =3D +0.00 V, max =3D +4= .08 V)=0A>=A0 > > > in2: +3.39 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 = > > > in3: +3.02 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > > in4: +0.= 05 V (min =3D +0.00 V, max =3D +4.08 V) ALARM=0A>=A0 > > > in5: +3.12 V (mi= n =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > > in6: +0.02 V (min =3D +0.00 V,= max =3D +4.08 V) ALARM=0A>=A0 > > > in7: +2.16 V (min =3D +0.00 V, max =3D= +4.08 V)=0A>=A0 > > > Vbat: +3.10 V=0A>=A0 > > > fan1: 1679 RPM (min =3D 1= 0 RPM)=0A>=A0 > > > fan2: 644 RPM (min =3D 0 RPM)=0A>=A0 > > > fan3: 1278 R= PM (min =3D 10 RPM)=0A>=A0 > > > fan4: 1205 RPM (min =3D 0 RPM)=0A>=A0 > > = > temp1: +36.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) senso= r =3D thermistor=0A>=A0 > > > temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, h= igh =3D +127.0=C2=B0C) sensor =3D thermistor=0A>=A0 > > > temp3: +33.0=C2= =B0C (low =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C) sensor =3D thermistor= =0A>=A0 > > > cpu0_vid: +0.313 V=0A>=A0 > > >=0A>=A0 > > >=0A>=A0 > > > Wha= t can I do then? currently I have kubuntu 10.04=0A>=A0 > > >=0A>=A0 > > > *= // Naderan *Mahmood;*=0A>=A0 > > >=0A>=A0 > > >=0A>=A0 > >=0A>=A0 > > Pick = sensors-detect from svn or file bug against lm-sensors in ubuntu and =0A>ma= intainer(if he is nice) update lm-sensors.=0A>=A0 > >=0A>=A0 >=0A>=0A=0A=0A= _______________________________________________=0Alm-sensors mailing list= =0Alm-sensors@lm-sensors.org=0Ahttp://lists.lm-sensors.org/mailman/listinfo= /lm-sensors=0A=0A=0A=0A --0-1292337673-1283329001=:2418 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable
=0A
>sudo /etc/init.d/lm_sensors restart=0A
 
=0A
mahmood@localhost:~$ sudo /etc/init.d/= lm-sensors restart
.: 39: Can't open /etc/init.d/functions
=0A
=  
=0A
= Note there is no lm_sensors. I have lm-sensors
 
=0A=0A
// Naderan *Mahmood;
=0A

=0A

=0A=0A
=0AFrom: Nikola Pajkovsky <npajkovs@redhat.com>
= To: lm-sensors@lm-sensors.org<= BR>Sent: Wed, September 1, = 2010 12:41:56 PM
Subject: Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors

O= n 09/01/2010 10:03 AM, Mahmood Naderan wrote:
>  >sudo ./sens= ors-detect
> Yes
> Intel Core family thermal sensor... Success!=
> (driver `coretemp')
> ...
> Now follows a summary of t= he probes I have just done.
> Just press ENTER to continue:
> D= river `it87':
> * ISA bus, address 0x290
> Chip `ITE IT8720F Su= per IO Sensors' (confidence: 9)
> Driver `coretemp':
> * Chip `= Intel Core family thermal sensor' (confidence: 9)
> Do you want to ge= nerate /etc/sysconfig/lm_sensors? (yes/NO): y
> Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
>= for initialization at boot time.
> You should now start the lm_senso= rs service to load the required
> kernel modules.
> I then copy= that file and restart
> mahmood@localhost:~$ <mailto:mahmood@blac= kfish:~$> ls /etc/init.d/lm*
> /etc/init.d/lm-sensors
> Howe= ver this is what I see again
> mahmood@localhost:~$ <mailto:mahmoo= d@localhost:~$> sudo sensors
> it8720-isa-0290
> Adapter: IS= A adapter
> in0: +0.86 V (min =3D +0.00 V, max =3D +4.08 V)
> i= n1: +1.58 V (min =3D +0.00 V, max =3D +4.08 V)
> in2: +3.39 V (min = =3D +0.00 V, max =3D +4.08 V)
> in3: +3.02 V (min =3D +0.00 V, max = =3D +4.08 V)
> in4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V) ALARM<= BR>> in5: +3.12 V (min =3D +0.00 V, max =3D +4.08 V)
> in6: +0.02 = V (min =3D +0.00 V, max =3D +4.08 V) ALARM
> in7: +2.16 V (min =3D +0= .00 V, max =3D +4.08 V)
> Vbat: +3.10 V
> fan1: 1638 RPM (min =3D 10 RPM)
> f= an2: 618 RPM (min =3D 0 RPM)
> fan3: 1278 RPM (min =3D 10 RPM)
>= ; fan4: 1203 RPM (min =3D 0 RPM)
> temp1: +35.0=C2=B0C (low =3D +127.= 0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor
> temp2: +25.= 0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermis= tor
> temp3: +33.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +90.0=C2= =B0C) sensor =3D thermistor
> cpu0_vid: +0.313 V
> No core-i7..= .. :(
> *// Naderan *Mahmood;*
>
sudo /etc/init.d/lm_sensors= restart


>
> --------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------------------- ----------------------
--
> *From:* Nikola Pajkovsky <npaj= kovs@redhat.com>
> *To:* lm-sensors@lm-sensors.= org
> *Sent:* Wed, September 1, 2010 12:23:10 PM
> *Subject= :* Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors
>
>= ; sudo ./sensors-detect
>
> On 09/01/2010 09:46 AM, Mahmood Nad= eran wrote:
>  > >just svn update # not needed if you have= fresh checkout
>  > To double check and be sure again:
&g= t;  > mahmood@localhost:~$ <mailto:mahmood@localhost:~$> svn = update 5857
>  > Skipped '5857'
>  >
>&nb= sp; > Then:
>  >
>  >
>  > mah= mood@localhost:~$ <mailto:mahmood@blackfish:~$> cd lm-sensors/prog/detect/
>  > mahmood@localhost:~/lm-sensors/= prog/detect$ <mailto:mahmood@blackfish:~/lm-sensors/prog/detect$> sud= o sensors-detect
>  > # sensors-detect revision 5818 (2010-01= -18 17:22:07 +0100)
>  > # System: Gigabyte Technology Co., L= td. P55-USB3
>  > This program will help you determine which = kernel modules you need
>  > to load to use lm_sensors most e= ffectively. It is generally safe
>  > and recommended to acce= pt the default answers to all questions,
>  > unless you know= what you're doing.
>  > Some south bridges, CPUs or memory c= ontrollers contain embedded sensors.
>  > Do you want to scan= for them? This is totally safe. (YES/no): y
>  > Silicon Int= egrated Systems SIS5595... No
>  > VIA VT82C686 Integrated Se= nsors... No
>  > VIA VT8231 Integrated Sensors... No
>  > AMD K8 thermal sensors... No
>  > AMD = Family 10h thermal sensors... No
>  > AMD Family 11h thermal = sensors... No
>  > Intel Core family thermal sensor... No
= >  > Intel Atom thermal sensor... No
>  > Intel AM= B FB-DIMM thermal sensor... No
>  > VIA C7 thermal sensor... = No
>  > VIA Nano thermal sensor... No
>  > Some= Super I/O chips contain embedded sensors. We have to write to
> = ; > standard I/O ports to probe them. This is usually safe.
> = ; > Do you want to scan for Super I/O sensors? (YES/no): y
> = > Probing for Super-I/O at 0x2e/0x2f
>  > Trying family `= National Semiconductor'... No
>  > Trying family `SMSC'... No=
>  > Trying family `VIA/Winbond/Nuvoton/Fintek'... No
>= ;  > Trying family `ITE'... Yes
>  > Found `ITE IT8720F Super IO Sensors' Success!
>  > (address 0x290,= driver `it87')
>  > Probing for Super-I/O at 0x4e/0x4f
&g= t;  > Trying family `National Semiconductor'... No
>  &g= t; Trying family `SMSC'... No
>  > Trying family `VIA/Winbond= /Nuvoton/Fintek'... No
>  > Trying family `ITE'... No
>=   > Some systems (mainly servers) implement IPMI, a set of common i= nterfaces
>  > through which system health data may be retrie= ved, amongst other things.
>  > We first try to get the infor= mation from SMBIOS. If we don't find it
>  > there, we have t= o read from arbitrary I/O ports to probe for such
>  > interf= aces. This is normally safe. Do you want to scan for IPMI
>  >= ; interfaces? (YES/no): y
>  > Probing for `IPMI BMC KCS' at = 0xca0... No
>  > Probing for `IPMI BMC SMIC' at 0xca8... No
>  > Some hardware monitoring chips are accessib= le through the ISA I/O ports.
>  > We have to write to arbitr= ary I/O ports to probe them. This is usually
>  > safe though= . Yes, you do have ISA I/O ports even if you do not have any
>  = > ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): y
>&= nbsp; > Probing for `National Semiconductor LM78' at 0x290... No
>=   > Probing for `National Semiconductor LM79' at 0x290... No
>= ;  > Probing for `Winbond W83781D' at 0x290... No
>  >= ; Probing for `Winbond W83782D' at 0x290... No
>  > Lastly, w= e can probe the I2C/SMBus adapters for connected hardware
>  >= ; monitoring devices. This is the most risky part, and while it works
&g= t;  > reasonably well on most systems, it has been reported to caus= e trouble
>  > on some systems.
>  > Do you want to probe the I2C/SMBus adapters now? (YES/no): y
>  &g= t; Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.
>  >= ; Sorry, no supported PCI bus adapters found.
>  > Module i2c= -dev loaded successfully.
>  > Now follows a summary of the p= robes I have just done.
>  > Just press ENTER to continue:>  > Driver `it87':
>  > * ISA bus, address 0x290=
>  > Chip `ITE IT8720F Super IO Sensors' (confidence: 9)
= >  > To load everything that is needed, add this to /etc/modules= :
>  > #----cut here----
>  > # Chip drivers>  > it87
>  > #----cut here----
>  &g= t; If you have some drivers built into your kernel, the list above will
= >  > contain too many modules. Skip the appropriate ones!
>= ;  > Do you want to add these lines automatically to /etc/modules? (yes/NO)yes
>  > Successful!
>  >= ; Monitoring programs won't work until the needed modules are
> = > loaded. You may want to run '/etc/init.d/module-init-tools start'
= >  > to load them.
>  > Unloading i2c-dev... OK>  >
>  > But that didn't help. See the sensors o= utput:
>  >
>  > mahmood@localhost:~/lm-sensors= /prog/detect$ <mailto:mahmood@blackfish:~/lm-sensors/prog/detect$> su= do sensors
>  > it8720-isa-0290
>  > Adapter: I= SA adapter
>  > in0: +0.86 V (min =3D +0.00 V, max =3D +4.08 = V)
>  > in1: +1.58 V (min =3D +0.00 V, max =3D +4.08 V)
&g= t;  > in2: +3.39 V (min =3D +0.00 V, max =3D +4.08 V)
> = > in3: +3.02 V (min =3D +0.00 V, max =3D +4.08 V)
>  > in= 4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V) ALARM
>  > in5:= +3.12 V (min =3D +0.00 V, max =3D +4.08 V)
>  > in6: +0.02 V (min =3D +0.= 00 V, max =3D +4.08 V) ALARM
>  > in7: +2.16 V (min =3D +0.00= V, max =3D +4.08 V)
>  > Vbat: +3.10 V
>  > fa= n1: 1683 RPM (min =3D 10 RPM)
>  > fan2: 644 RPM (min =3D 0 R= PM)
>  > fan3: 1280 RPM (min =3D 10 RPM)
>  > f= an4: 1203 RPM (min =3D 0 RPM)
>  > temp1: +35.0=C2=B0C (low = =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor
>&nb= sp; > temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C= ) sensor =3D thermistor
>  > temp3: +33.0=C2=B0C (low =3D +12= 7.0=C2=B0C, high =3D +90.0=C2=B0C) sensor =3D thermistor
>  >= cpu0_vid: +0.313 V
>  >
>  > Any idea? Thanks,=
>  > *// Naderan *Mahmood;*
>  >
> = >
>  > --------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------------------- ------------------
----
> --
>  > *From:* Nikola Pa= jkovsky <npajkovs@redhat.com <mailto:npajkovs@redhat.com>>
>  > *To:* lm-sensors@lm-sensors.org= <mailto:lm-sensors@lm-sensors.org>
>&nb= sp; > *Sent:* Wed, September 1, 2010 12:08:07 PM
>  > *Sub= ject:* Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors
>&nb= sp; >
>  > On 09/01/2010 09:30 AM, Mahmood Naderan wrote:<= BR>>  > > Here is what I did:
>  > > mahmood= @localhost:~$ <mailto:mahmood@localhost:~$> svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors
>  > &= gt; ...
>  > > Checked out revision 5857.
>  &g= t; Yes
>  >
>  > > mahmood@localhost:~$ <= mailto:mahmood@blackfish:~$> svn update http://lm-sensors.org/svn/lm-sensors= /trunk lm-sensors
>  > > Skipped 'http://lm-sensors.or= g/svn/lm-sensors/trunk'
>  > > At revision 5857.
>&n= bsp; > > Summary of conflicts:
>  > > Skipped paths:= 1
>  > > Is that what you meant?
>  > > = *// Naderan *Mahmood;*
>  > just svn update # not needed if y= ou have fresh checkout
>  >
>  > in lm-sensors/= prog/detect run sensors-detect and it should find your core-i7
> = ; >
>  > >
>  > >
>  > > --------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------------------- ----------------
--
> ----
>  > --
>  &g= t; > *From:* Nikola Pajkovsky <npajkovs@redhat.com <mailto:= npajkovs@redhat.com> <mailto:npajkovs@redhat.com <ma= ilto:npajkovs@redhat.com>>>
>  > > *To:* <= A href=3D"mailto:lm-sensors@lm-sensors.org" ymailto=3D"mailto:lm-sensors@lm= -sensors.org">lm-sensors@lm-sensors.org <mailto:lm-se= nsors@lm-sensors.org> <mailto:lm-sensors@lm-sensor= s.org <mailto:lm-sensors@lm-sensors.org>>
>&nb= sp; > > *Sent:* Wed, September 1, 2010 11:49:03 AM
>  >= > *Subject:* Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors<= BR>>  > >
>  > > On 09/01/2010 08:38 AM, Mah= mood Naderan wrote:
>  > > > Dear all,
>  &g= t; > >
>  > > > I ran sensors-detect to detect Co= re-i7 temperatures but it doesn't show them. Here is the output of sensors-= detect:
>  > > >
>  > > >
>&n= bsp; > > > mahmood@localhost:~$ sudo sensors-detect
>  = > > > # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)>  > > > # System: Gigabyte Technology Co., Ltd. P55-USB= 3
>  > > >
>  > > > This program will help you determine which kernel modules you need
>  > &= gt; > to load to use lm_sensors most effectively. It is generally safe>  > > > and recommended to accept the default answers t= o all questions,
>  > > > unless you know what you're d= oing.
>  > > >
>  > > > Some south = bridges, CPUs or memory controllers contain embedded sensors.
> = > > > Do you want to scan for them? This is totally safe. (YES/no= ): y
>  > > > Silicon Integrated Systems SIS5595... No<= BR>>  > > > VIA VT82C686 Integrated Sensors... No
>&= nbsp; > > > VIA VT8231 Integrated Sensors... No
>  >= > > AMD K8 thermal sensors... No
>  > > > AMD Fa= mily 10h thermal sensors... No
>  > > > AMD Family 11h = thermal sensors... No
>  > > > Intel Core family thermal sensor... No
>  > > > Intel Atom thermal senso= r... No
>  > > > Intel AMB FB-DIMM thermal sensor... No=
>  > > > VIA C7 thermal sensor... No
>  >= ; > > VIA Nano thermal sensor... No
>  > > >
&= gt;  > > > Some Super I/O chips contain embedded sensors. We = have to write to
>  > > > standard I/O ports to probe t= hem. This is usually safe.
>  > > > Do you want to scan= for Super I/O sensors? (YES/no): y
>  > > > Probing fo= r Super-I/O at 0x2e/0x2f
>  > > > Trying family `Nation= al Semiconductor'... No
>  > > > Trying family `SMSC'..= . No
>  > > > Trying family `VIA/Winbond/Nuvoton/Fintek= '... No
>  > > > Trying family `ITE'... Yes
>&nbs= p; > > > Found `ITE IT8720F Super IO Sensors' Success!
>  > > > (address 0x290, driver `it87')
&g= t;  > > > Probing for Super-I/O at 0x4e/0x4f
>  &g= t; > > Trying family `National Semiconductor'... No
>  >= ; > > Trying family `SMSC'... No
>  > > > Trying = family `VIA/Winbond/Nuvoton/Fintek'... No
>  > > > Tryi= ng family `ITE'... No
>  > > >
>  > > = > Some systems (mainly servers) implement IPMI, a set of common interfac= es
>  > > > through which system health data may be ret= rieved, amongst other things.
>  > > > We first try to = get the information from SMBIOS. If we don't find it
>  > >= ; > there, we have to read from arbitrary I/O ports to probe for such>  > > > interfaces. This is normally safe. Do you want t= o scan for IPMI
>  > > > interfaces? (YES/no): y
>  > > > Probing for `IPMI BMC KCS' at 0xca0... No>  > > > Probing for `IPMI BMC SMIC' at 0xca8... No
&= gt;  > > >
>  > > > Some hardware monitor= ing chips are accessible through the ISA I/O ports.
>  > >= > We have to write to arbitrary I/O ports to probe them. This is usuall= y
>  > > > safe though. Yes, you do have ISA I/O ports = even if you do not have any
>  > > > ISA slots! Do you = want to scan the ISA I/O ports? (yes/NO): y
>  > > > Pr= obing for `National Semiconductor LM78' at 0x290... No
>  > &= gt; > Probing for `National Semiconductor LM79' at 0x290... No
>&n= bsp; > > > Probing for `Winbond W83781D' at 0x290... No
>&nb= sp; > > > Probing for `Winbond W83782D' at 0x290... No
>&nbs= p; > > >
>  > > > Lastly, we can probe the I2C/SMBus adapters for connected hardware
>  > > >= monitoring devices. This is the most risky part, and while it works
>= ;  > > > reasonably well on most systems, it has been reporte= d to cause trouble
>  > > > on some systems.
>&nb= sp; > > > Do you want to probe the I2C/SMBus adapters now? (YES/no= ): y
>  > > > Found unknown SMBus adapter 8086:3b30 at = 0000:00:1f.3.
>  > > > Sorry, no supported PCI bus adap= ters found.
>  > > > Module i2c-dev loaded successfully= .
>  > > >
>  > > > Now follows a s= ummary of the probes I have just done.
>  > > > Just pr= ess ENTER to continue:
>  > > >
>  > >= > Driver `it87':
>  > > > * ISA bus, address 0x290<= BR>>  > > > Chip `ITE IT8720F Super IO Sensors' (confidence: 9)
>  > > >
>  > > > = To load everything that is needed, add this to /etc/modules:
>  = > > > #----cut here----
>  > > > # Chip driver= s
>  > > > it87
>  > > > #----cut h= ere----
>  > > > If you have some drivers built into yo= ur kernel, the list above will
>  > > > contain too man= y modules. Skip the appropriate ones!
>  > > >
>&= nbsp; > > > Do you want to add these lines automatically to /etc/m= odules? (yes/NO)yes
>  > > > Successful!
>  = > > >
>  > > > Monitoring programs won't work = until the needed modules are
>  > > > loaded. You may w= ant to run '/etc/init.d/module-init-tools start'
>  > > &g= t; to load them.
>  > > >
>  > > > Unloading i2c-dev... OK
>  > > >
>&nbs= p; > > >
>  > > > Then I ran sensors:
>&= nbsp; > > >
>  > > > mahmood@localhost:~$ sudo= sensors
>  > > > it8720-isa-0290
>  > &g= t; > Adapter: ISA adapter
>  > > > in0: +0.86 V (min= =3D +0.00 V, max =3D +4.08 V)
>  > > > in1: +1.58 V (m= in =3D +0.00 V, max =3D +4.08 V)
>  > > > in2: +3.39 V = (min =3D +0.00 V, max =3D +4.08 V)
>  > > > in3: +3.02 = V (min =3D +0.00 V, max =3D +4.08 V)
>  > > > in4: +0.0= 5 V (min =3D +0.00 V, max =3D +4.08 V) ALARM
>  > > > i= n5: +3.12 V (min =3D +0.00 V, max =3D +4.08 V)
>  > > >= in6: +0.02 V (min =3D +0.00 V, max =3D +4.08 V) ALARM
>  > &= gt; > in7: +2.16 V (min =3D +0.00 V, max =3D +4.08 V)
>  >= > > Vbat: +3.10 V
>  > > > fan1: 1679 RPM (min =3D 10 RPM)
>&nbs= p; > > > fan2: 644 RPM (min =3D 0 RPM)
>  > > >= ; fan3: 1278 RPM (min =3D 10 RPM)
>  > > > fan4: 1205 R= PM (min =3D 0 RPM)
>  > > > temp1: +36.0=C2=B0C (low = =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor
>&nb= sp; > > > temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +12= 7.0=C2=B0C) sensor =3D thermistor
>  > > > temp3: +33.0= =C2=B0C (low =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C) sensor =3D thermisto= r
>  > > > cpu0_vid: +0.313 V
>  > > &= gt;
>  > > >
>  > > > What can I do= then? currently I have kubuntu 10.04
>  > > >
>&= nbsp; > > > *// Naderan *Mahmood;*
>  > > >>  > > >
>  > >
>  > > = Pick sensors-detect from svn or file bug against lm-sensors in ubuntu and maintainer(if he is nice) update lm-s= ensors.
>  > >
>  >
>


_____= __________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/m= ailman/listinfo/lm-sensors

=0A=0A --0-1292337673-1283329001=:2418-- --===============3739733468676070880== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============3739733468676070880==--