From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Soete Subject: [parisc-linux] 2.6.9-rc2-pa1: what did I missed? Date: Tue, 14 Sep 2004 18:33:49 +0000 Message-ID: <4147398D.503@tiscali.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed To: parisc-linux@lists.parisc-linux.org Return-Path: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Hello pa*, on my c110, I used to get usefull info during the boot as follow: Selected kernel: /vmlinux-2.6.8.1-pa7 from partition 3 ELF32 executable Entry 00100338 first 00100000 n 2 Segment 0 load 00100000 size 3081408 mediaptr 0x1000 Segment 1 load 003f1000 size 946192 mediaptr 0x2f2000 Branching to kernel entry point 0x00100338. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.6.8.1-pa7 (root@hpalin) (gcc version 3.3.4 (Debian 1:3.3.4-9)) 4 FP[0] enabled: Rev 1 Model 11 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 000058e0 00000481 00000000 00000002 77e47570 100000f1 00000004 0000008a 0a vers 0000000d CPUID vers 11 rev 13 (0x0000016d) model 9000/777/C110 Total Memory: 512 Mb LED display at f0190001 registered SMP: bootstrap CPU ID is 0 Built 1 zonelists Kernel command line: root=/dev/md2 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=7 PID hash table entries: 16 (order 4: 128 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 524288k available Calibrating delay loop... 119.60 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Brought up 1 CPUs NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b } 2. SkyHawk 100/120 FW-SCSI at 0xf3f8c000 [8/12] { 4, 0x0, 0x01f, 0x00089 } 3. Raven T' Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x032, 0x00081 }, addition 4. Raven T' Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x032, 0x00074 }, 5. Raven T' Audio at 0xffd04000 [8/16/1] { 10, 0x0, 0x032, 0x0007b } [...] 20. Raven 120 T' at 0xfffa0000 [32] { 0, 0x0, 0x58e, 0x00004 } 21. Memory at 0xfffb1000 [49] { 1, 0x0, 0x049, 0x00009 } CPU(s): 1 x PA7200 (PCX-T') at 120.000000 MHz Found U2 at 0xfff88000 Found U2 at 0xfff8a000 Lasi version 0 at 0xffd00000 found. Wax at 0xffe00000 found. Wax EISA Adapter found at 0xfc000000 EISA EEPROM: cannot register misc device. Enumerating EISA bus EISA: Probing bus 0 at parisc8:20:5 EISA: Mainboard HWPC0E1 detected. EISA: Detected 0 cards. SCSI subsystem initialized STI GSC/PCI core graphics driver Version 0.9a id 2b4ded6d-40a00499, conforms to spec rev. 8.04 graphics card name: HPA208LC1024 fb0: stifb 1024x768-8 frame buffer device, HPA208LC1024, id: 2b4ded6d, mmio: 0x0 unwind_init: start = 0x103f2a20, end = 0x10415be0, entries = 8988 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API Soft power switch enabled, polling @ 0xf0140000. Console: switching to colour frame buffer device 128x48 lp: driver loaded but no devices found Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). loop: loaded (max 8 devices) LASI 82596 driver - Revision: 1.30 Found i82596 at 0xffd07000, IRQ 87 eth0: 82596 at 0xffd07000, 00 60 B0 07 1E EA IRQ 87. zalon_probe: Zalon vers field is 0x1, IRQ 35 ncr53c720-0: rev 0xf irq 35 ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3f [...] now with 2.6.9-rc2-pa1 + revamping patch I get only and the near same config file (I just copy the old and 'make oldconfig'): Selected kernel: /vmlinux-2.6.9-rc2-pa1UP32-c110 from partition 3 ELF32 executable Entry 00100158 first 00100000 n 3 Segment 0 load 00100000 size 2916992 mediaptr 0x1000 Segment 1 load 003c9000 size 541536 mediaptr 0x2ca000 Segment 2 load 00450000 size 413848 mediaptr 0x34f000 Branching to kernel entry point 0x00100158. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org <<<<<<<< ?? device: ID = 'ptywd' lp: driver loaded but no devices found Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A [...] I doubt it has any relationship with tausq patch. Is it a new feature: silent boot (ala hpux :) )? Thanks in advance for your attention, Joel PS: fwiw nothing more seems to be logged in dmesg, kernel.log, syslog? _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux