From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mailserv.intranet.gr (mailserv.intranet.GR [146.124.14.106]) by ozlabs.org (Postfix) with ESMTP id 6203D2BDCF for ; Tue, 21 Sep 2004 22:15:43 +1000 (EST) Received: from mailserv.intranet.gr (localhost [127.0.0.1]) by mailserv.intranet.gr (8.13.1/8.13.1) with ESMTP id i8LCFx7X023918 for ; Tue, 21 Sep 2004 15:15:59 +0300 (EEST) Message-ID: <41501648.6040302@intracom.gr> Date: Tue, 21 Sep 2004 14:53:44 +0300 From: Pantelis Antoniou MIME-Version: 1.0 To: "Smith, Craig" References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Cc: linuxppc-dev@ozlabs.org, 'Song Sam' Subject: Re: Linux 2.6.x on 8xx status List-Id: "Linux on PowerPC \(Including Embedded\) Developers Mail List" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Smith, Craig wrote: >>Guess what? It WORKED!!! Just one more line make it. >>Could you pls tell us the theory in it if not too >>complicated? :-) >> >Genius. That patch appears to work for me as well. > >However, I'm still not able to debug via gdb/BDI2000. >I'm getting the ol' "MMU: address translation for 0xc----- failed". >I'm using the same BDI config file that works fine for debugging >a 2.4.26 kernel on the same hardware, I've verified that I have >CONFIG_BDI_SWITCH=y etc. Is this another known issue with 2.6 >on 8xx platforms? Has anyone had success debugging via BDI2000 on an 8xx >board? >If so, could you share your config file or hints as to why it should behave >differently (i.e. not work) with a 2.6 kernel? Thanks. > >Regards, >-Craig > > > BDI2000 does not work for 8xx 2.6 ATM. Dan should probably get it to work when he has time. At least that's what I hope... Regards Pantelis