From: RChan <rspchan@starhub.net.sg>
To: sparclinux@vger.kernel.org
Subject: Ooops on serial logins: V210 and 2.6.[89]
Date: Thu, 07 Oct 2004 10:49:42 +0000 [thread overview]
Message-ID: <41651F46.4080800@starhub.net.sg> (raw)
Getting the following Oops on serial logins. I'm running agetty on ttyS0/1;
the oops happens after collecting the user name.
Kernel: 2.6.8-1.571 (from Aurora Linux), 2.6.9-rc3 (home-brewed)
Machine: SunFire V210 (detailed dmesg below the oops)
2.4.2[67] are ok.
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 0000000000000653
tsk->{mm,active_mm}->pgd = fffff8103d550000
\|/ ____ \|/
"@'/ .. \`@"
/_| \__/ |_\
\__U_/
login(1911): Oops [#1]
TSTATE: 0000009911009600 TPC: 000000000041d480 TNPC: 000000000041d484 Y:
00000000 Not tainted
TPC: <synchronize_irq+0x0/0x40>
g0: 0000150000000005 g1: 0000000000000006 g2: 0000000000000030 g3:
0000000000000078
g4: fffff8103ebac1e0 g5: 0000000000000007 g6: fffff8103d7a4000 g7:
fffff8103fe84010
o0: 0000000000000000 o1: 0000000000000000 o2: fffff8103ef971e0 o3:
0000000000000000
o4: 0000000000000000 o5: 0000000000000000 sp: fffff8103d7a73a1 ret_pc:
0000000000559f60
RPC: <uart_shutdown+0xa0/0x120>
l0: fffff8103ed09700 l1: 0000000000000000 l2: ffffffffffffffff l3:
0000000000000000
l4: 0000000000000000 l5: 0000000000000000 l6: 0000000000000000 l7:
0000000000000000
i0: 000000000075fa38 i1: 0000000000000000 i2: 0000000000000001 i3:
0000000000000000
i4: 0000000000000000 i5: 8000000000000000 i6: fffff8103d7a7461 i7:
000000000055b9f8
I7: <uart_hangup+0x58/0xc0>
Caller[000000000055b9f8]: uart_hangup+0x58/0xc0
Caller[000000000053f670]: do_tty_hangup+0x2b0/0x3e0
Caller[000000000049016c]: sys_vhangup+0x2c/0x40
Caller[00000000004112b4]: linux_sparc_syscall32+0x34/0x40
Caller[0000000000014e28]: 0x14e28
Instruction DUMP: 01000000 01000000 01000000 <c20a2006> 82086010
80a06000 02400007 01000000 c20a2006
TSTATE: 00000044f0000a04 TPC: 0000000000024f64 TNPC: 000000007010a120 Y:
00000000 Not tainted
TPC: <0x24f64>
g0: 0000000000000000 g1: 000000007010a000 g2: 00000000effffc18 g3:
0000000070029408
g4: 0000000000000001 g5: 0000000000000020 g6: 0000feffffffffff g7:
00000000700163a8
o0: 0000000000000005 o1: 00000000effff398 o2: 0000000000000001 o3:
0000000000014548
o4: 00000000fefefeff o5: 00000000effffe30 sp: 00000000effff338 ret_pc:
0000000000012244
RPC: <0x12244>
l0: 00000000 l1: 00000000 l2: 00000001 l3: effff398 l4: effffc18 l5:
00026070 l6: effff3d8 l7: 70184290
i0: 00000001 i1: 00000000 i2: 00000022 i3: 00000000 i4: 00000000 i5:
00000000 i6: effffc20 i7: 00013f18
PROMLIB: Sun IEEE Boot Prom 4.11.4 2003/07/23 08:04
Linux version 2.6.9-rc3.3smp (root@renoir) (gcc version 3.3.4 20040623
(Gentoo Linux 3.3.4)) #2 SMP Thu Oct 7 17:39:22 SGT 2004
ARCH: SUN4U
Ethernet address: 00:03:ba:8b:61:15
On node 0 totalpages: 261211
DMA zone: 261211 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: ro root=LABEL=SDA1 video=radeonfb:off
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Memory: 1619008k available (2128k kernel code, 912k data, 176k init)
[fffff80000000000,000000103feae000]
Calibrating delay loop... 665.60 BogoMIPS (lpj32800)
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
Calibrating delay loop... 665.60 BogoMIPS (lpj32800)
CPU 0: synchronized TICK with master CPU (last diff -1 cycles,maxerr 6
cycles)
Brought up 2 CPUs
Total of 2 processors activated (1331.20 BogoMIPS).
SMP: Calibrating ecache flush... Using heuristic of 15397 cycles, 1 ticks.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 446k freed
NET: Registered protocol family 16
PCI: Probing for controllers.
TOMATILLO0 PBMB: ver[4:0], portid 1f, cregs[4000fc00000] pregs[4000ff00000]
TOMATILLO0 PBMB: PCI CFG[7f600000000] IO[7f601000000] MEM[7f700000000]
TOMATILLO0 PBMA: ver[4:0], portid 1e, cregs[4000f400000] pregs[4000f600000]
TOMATILLO0 PBMA: PCI CFG[7fe00000000] IO[7fe01000000] MEM[7ff00000000]
TOMATILLO1 PBMA: ver[4:0], portid 1c, cregs[4000e400000] pregs[4000e600000]
TOMATILLO1 PBMA: PCI CFG[7ce00000000] IO[7ce01000000] MEM[7cf00000000]
TOMATILLO1 PBMB: ver[4:0], portid 1d, cregs[4000ec00000] pregs[4000ef00000]
TOMATILLO1 PBMB: PCI CFG[7c600000000] IO[7c601000000] MEM[7c700000000]
PCI-IRQ: Routing bus[ 0] slot[ 1] map[0] to INO[04]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1d]
PCI1(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[29]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[28]
PCI1(PBMA): Bus running at 66MHz
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[08]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[09]
PCI0(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 0] slot[ a] map[0] to INO[27]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[18]
PCI0(PBMA): Bus running at 33MHz
isa0: [flashprom] [rtc] [i2c -> (i2c-bridge) (i2c-bridge)
(motherboard-fru-prom) (chassis-fru-prom) (power-supply-fru-prom)
(dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (rscrtc) (nvram) (idprom)
(gpio) (gpio) (gpio) (gpio)] [power] [serial] [serial] [rmc-comm]
ebus: No EBus's found.
SCSI subsystem initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
Console: switching to mono PROM 80x34
Real Time Clock Driver v1.12
ttyS0 at MMIO 0x7fe010003f8 (irq = 0) is a 16550A
ttyS1 at MMIO 0x7fe010002e8 (irq = 0) is a 16550A
Using anticipatory io scheduler
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0d.0
ALI15X3: chipset revision 196
ALI15X3: 100% native mode on irq 4,798
ide0: BM-DMA at 0x7fe01000920-0x7fe01000927, BIOS settings: hda:pio,
hdb:pio
ALI15X3: simplex device: DMA forced
ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f, BIOS settings: hdc:DMA,
hdd:DMA
Probing IDE interface ide0...
hda: DV-28E-C, ATAPI CD/DVD-ROM drive
ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 4,798
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 15
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
sym0: <1010-66> rev 0x1 at pci 0002:00:02.0 irq 4,729
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Vendor: FUJITSU Model: MAP3735N SUN72G Rev: 0401
Type: Direct-Access ANSI SCSI revision: 04
sym0:0:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:0:0): Beginning Domain Validation
sym0:0: wide asynchronous.
sym0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
scsi(0:0:0:0): Ending Domain Validation
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 sda5 sda6
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: FUJITSU Model: MAP3735N SUN72G Rev: 0401
Type: Direct-Access ANSI SCSI revision: 04
sym0:1:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:1:0): Beginning Domain Validation
sym0:1: wide asynchronous.
sym0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
scsi(0:0:1:0): Ending Domain Validation
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4 sdb5
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym1: <1010-66> rev 0x1 at pci 0002:00:02.1 irq 4,728
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18j
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3999152k swap on /dev/sda2. Priority:-1 extents:1
EXT3 FS on sda1, internal journal
tg3.c:v3.10 (September 14, 2004)
eth0: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit)
10/100/1000BaseT Ethernet 00:03:ba:8b:61:17
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth1: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit)
10/100/1000BaseT Ethernet 00:03:ba:8b:61:18
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth2: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit)
10/100/1000BaseT Ethernet 00:03:ba:8b:61:15
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth3: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit)
10/100/1000BaseT Ethernet 00:03:ba:8b:61:16
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:0a.0: ALi Corporation USB 1.1 Controller
ohci_hcd 0000:00:0a.0: irq 10,7a7, pci mem 000007ff01000000
ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
/usr/src/linux-bk.20041007/drivers/usb/input/hid-core.c: v2.0:USB HID
core driver
usb 1-1: new low speed USB device using address 2
input: USB HID v1.00 Keyboard [0430:0005] on usb-0000:00:0a.0-1
kjournald starting. Commit interval 5 seconds
reply other threads:[~2004-10-07 10:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41651F46.4080800@starhub.net.sg \
--to=rspchan@starhub.net.sg \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.