From: Jeff Garzik <jgarzik@pobox.com>
To: rme@image.dk
Cc: linux-ide@vger.kernel.org
Subject: Re: sata_sil + Maxtor
Date: Fri, 08 Oct 2004 10:50:34 -0400 [thread overview]
Message-ID: <4166A93A.4030403@pobox.com> (raw)
In-Reply-To: <200410080948.45286.rme@image.dk>
Rasmus Melgaard wrote:
> Hi,
>
> I have a IDE/SATA problem. I have a Silicon Image 3112 sata-controller with a
> Maxtor 160 Gb drive connected. Controller and drive is detected in the
> kernel-boot process, but an error happens during boot, I think the linux
> driver gets an response it doesn't expect.
>
> I'm using for testing the mm-kernel: 2.6.9-rc1-mm1. Every thing seems to work
> in Windows, but since I mainly use Linux (Gentoo), I would like it to work
> here.
>
> Does anybody have an ideer of how to proceed to solve this problem ?
>
> Mvh
> Rasmus
>
> Important part of log:
> Sep 5 15:55:39 rasmus scsi1 : sata_sil
> Sep 5 15:55:39 rasmus ata2: no device found (phy stat 00000000)
> Sep 5 15:55:39 rasmus scsi2 : sata_sil
> Sep 5 15:55:39 rasmus Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
> Sep 5 15:55:39 rasmus Type: Direct-Access ANSI SCSI
> revision: 05
> Sep 5 15:55:39 rasmus SCSI device sda: 320173056 512-byte hdwr sectors
> (163929 MB)
> Sep 5 15:55:39 rasmus SCSI device sda: drive cache: write back
> Sep 5 15:55:39 rasmus /dev/scsi/host1/bus0/target0/lun0:<3>ata1: command 0x25
> timeout, stat 0x58 host_stat 0x60
> Sep 5 15:55:39 rasmus ata1: status=0x58 { DriveReady SeekComplete
> DataRequest }
> Sep 5 15:55:39 rasmus SCSI error : <1 0 0 0> return code = 0x8000002
> Sep 5 15:55:39 rasmus Current sda: sense = 70 10
> Sep 5 15:55:39 rasmus end_request: I/O error, dev sda, sector 0
> Sep 5 15:55:39 rasmus Buffer I/O error on device sda, logical block 0
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ata1: command 0x25 timeout, stat 0xd8 host_stat 0x61
> Sep 5 15:55:39 rasmus ata1: status=0xd8 { Busy }
> Sep 5 15:55:39 rasmus SCSI error : <1 0 0 0> return code = 0x8000002
> Sep 5 15:55:39 rasmus Current sda: sense = 70 10
> Sep 5 15:55:39 rasmus end_request: I/O error, dev sda, sector 0
> Sep 5 15:55:39 rasmus Buffer I/O error on device sda, logical block 0
It's quite clearly a device error... Try upgrading your system and card
BIOS, try switching cables, try booting with "noapic" or "acpi=off" or
"pci=biosirq" or something like that...
Jeff
next prev parent reply other threads:[~2004-10-08 14:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-08 7:48 sata_sil + Maxtor Rasmus Melgaard
2004-10-08 14:50 ` Jeff Garzik [this message]
2004-11-24 10:26 ` David Greaves
2004-11-27 17:57 ` Solution -> sata_sil + Maxtor problem Rasmus Melgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4166A93A.4030403@pobox.com \
--to=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=rme@image.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.