From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Volf Date: Sat, 09 Oct 2004 08:05:59 +0000 Subject: Re: [LARTC] Does anyone have a working proxyARP setup? Message-Id: <41679BE7.2030708@inv.cz> List-Id: References: <41676C12.72F7D09D@iswest.com> In-Reply-To: <41676C12.72F7D09D@iswest.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org gypsy wrote: ... > gypsy> ifconfig eth0 x.x.x.96 broadcast x.x.x.111 netmask > 255.255.255.240 > gypsy> ifconfig eth1 x.x.x.96 broadcast x.x.x.111 netmask > 255.255.255.240 ... I think you can't use x.x.x.96 here, because it is the address of your network x.x.x.96/28. Useable ip addresses are .97 - .110. And you can't have the same ip address and netmask on two interfaces. Use maybe 'netmask 255.255.255.255' on one of them. As far as the question in the subject is concerned, yes, I have. -- Martin _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/