From mboxrd@z Thu Jan 1 00:00:00 1970 From: gypsy Date: Tue, 12 Oct 2004 13:33:09 +0000 Subject: Re: [LARTC] Does anyone have a working proxyARP setup? Message-Id: <416BDD15.BDAE0ED9@iswest.com> List-Id: References: <41676C12.72F7D09D@iswest.com> In-Reply-To: <41676C12.72F7D09D@iswest.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org gypsy wrote: > > Martin Volf wrote: > > I think you can't use x.x.x.96 here, because it is the address of your network > > x.x.x.96/28. Useable ip addresses are .97 - .110. And you can't have the same > > ip address and netmask on two interfaces. Use maybe 'netmask 255.255.255.255' > > on one of them. > > Could you please post the output of 'route -n', 'ip route' and 'ip neigh > show' as well as any 'ip route [add|del|*]' commands you run? I guess not. Martin, is there some reason you do not wish to post these things? gypsy _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/