From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: mturquette@baylibre.com, linux-clk@vger.kernel.org,
sboyd@codeaurora.org, robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org, horms+renesas@verge.net.au
Subject: [PATCH v4] clk: renesas: cpg-mssr: add R8A7745 support
Date: Wed, 09 Nov 2016 00:25:08 +0300 [thread overview]
Message-ID: <4179265.sjm4z2joGl@wasted.cogentembedded.com> (raw)
In-Reply-To: <3539878.XFtRJDB9iq@wasted.cogentembedded.com>
Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo
plus the R8A7743 clock driver patch. It depends on the common R-Car gen2 (and
RZ/G) support just posted.
Changes in version 4:
- changed the Z2 clock's divisor to 1;
- passed the PLL0 divisor to rcar_gen2_cpg_init();
- renamed the ACP clock to CPEX;
- removed the thermal module clock.
Changes in version 3:
- removed the FDP1-1 module clock;
- added Geert's tag.
Changes in version 2:
- changed the Z2 clock's divisor to 3.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 5
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7745-cpg-mssr.c | 259 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 271 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -14,6 +14,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
- "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
+ - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -23,8 +24,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7743, r8a7795, r8a7796)
- - "usb_extal" (r8a7743)
+ - "extal" (r8a7743, r8a7745, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743, r8a7745)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: linux/drivers/clk/renesas/Kconfig
===================================================================
--- linux.orig/drivers/clk/renesas/Kconfig
+++ linux/drivers/clk/renesas/Kconfig
@@ -1,6 +1,7 @@
config CLK_RENESAS_CPG_MSSR
bool
default y if ARCH_R8A7743
+ default y if ARCH_R8A7745
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: linux/drivers/clk/renesas/Makefile
===================================================================
--- linux.orig/drivers/clk/renesas/Makefile
+++ linux/drivers/clk/renesas/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
+obj-$(CONFIG_ARCH_R8A7745) += r8a7745-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
===================================================================
--- /dev/null
+++ linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
@@ -0,0 +1,259 @@
+/*
+ * r8a7745 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7745_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7745_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("lb", R8A7745_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7745_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7745_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7745_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7745_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("z2", R8A7745_CLK_Z2, CLK_PLL0, 1, 1),
+ DEF_FIXED("zg", R8A7745_CLK_ZG, CLK_PLL1, 6, 1),
+ DEF_FIXED("zx", R8A7745_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7745_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7745_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7745_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7745_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7745_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("cp", R8A7745_CLK_CP, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7745_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7745_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7745_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7745_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7745_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("cpex", R8A7745_CLK_CPEX, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7745_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7745_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7745_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7745_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7745_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7745_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7745_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7745_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7745_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7745_CLK_P),
+ DEF_MOD("3dg", 112, R8A7745_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7745_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7745_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7745_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7745_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7745_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7745_CLK_CP),
+ DEF_MOD("vsp1du0", 128, R8A7745_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7745_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7745_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7745_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7745_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7745_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7745_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7745_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7745_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7745_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7745_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7745_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7745_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7745_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7745_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7745_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7745_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7745_CLK_HP),
+ DEF_MOD("iic1", 323, R8A7745_CLK_HP),
+ DEF_MOD("cmt1", 329, R8A7745_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7745_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7745_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7745_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7745_CLK_ZS),
+ DEF_MOD("audio-dmac0", 502, R8A7745_CLK_HP),
+ DEF_MOD("pwm", 523, R8A7745_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7745_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7745_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7745_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7745_CLK_P),
+ DEF_MOD("scif4", 715, R8A7745_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7745_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7745_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7745_CLK_P),
+ DEF_MOD("scif2", 719, R8A7745_CLK_P),
+ DEF_MOD("scif1", 720, R8A7745_CLK_P),
+ DEF_MOD("scif0", 721, R8A7745_CLK_P),
+ DEF_MOD("du0", 724, R8A7745_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7745_CLK_ZX),
+ DEF_MOD("vin1", 810, R8A7745_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7745_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7745_CLK_HP),
+ DEF_MOD("ether", 813, R8A7745_CLK_P),
+ DEF_MOD("gpio6", 905, R8A7745_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7745_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7745_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7745_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7745_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7745_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7745_CLK_CP),
+ DEF_MOD("can1", 915, R8A7745_CLK_P),
+ DEF_MOD("can0", 916, R8A7745_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7745_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7745_CLK_HP),
+ DEF_MOD("i2c4", 927, R8A7745_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7745_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7745_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7745_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7745_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7745_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7745_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7745_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7745_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7745_CLK_MP),
+};
+
+static const unsigned int r8a7745_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *2
+ *---------------------------------------------------
+ * 0 0 0 15 x200/3 x208/2 x106
+ * 0 0 1 15 x200/3 x208/2 x88
+ * 0 1 0 20 x150/3 x156/2 x80
+ * 0 1 1 20 x150/3 x156/2 x66
+ * 1 0 0 26 / 2 x230/3 x240/2 x122
+ * 1 0 1 26 / 2 x230/3 x240/2 x102
+ * 1 1 0 30 / 2 x200/3 x208/2 x106
+ * 1 1 1 30 / 2 x200/3 x208/2 x88
+ *
+ * *1 : Table 7.5b indicates VCO output (PLL0 = VCO/3)
+ * *2 : Table 7.5b indicates VCO output (PLL1 = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult PLL0 mult */
+ { 1, 208, 106, 200 },
+ { 1, 208, 88, 200 },
+ { 1, 156, 80, 150 },
+ { 1, 156, 66, 150 },
+ { 2, 240, 122, 230 },
+ { 2, 240, 102, 230 },
+ { 2, 208, 106, 200 },
+ { 2, 208, 88, 200 },
+};
+
+static int __init r8a7745_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config, 3);
+}
+
+const struct cpg_mssr_info r8a7745_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7745_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7745_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7745_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7745_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7745_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7745_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7745_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -509,6 +509,12 @@ static const struct of_device_id cpg_mss
.data = &r8a7743_cpg_mssr_info,
},
#endif
+#ifdef CONFIG_ARCH_R8A7745
+ {
+ .compatible = "renesas,r8a7745-cpg-mssr",
+ .data = &r8a7745_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -131,6 +131,7 @@ struct cpg_mssr_info {
};
extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7745_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
next prev parent reply other threads:[~2016-11-08 21:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-05 22:28 [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support Sergei Shtylyov
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
2016-11-07 8:34 ` Geert Uytterhoeven
2016-11-07 18:41 ` Geert Uytterhoeven
2016-11-05 22:34 ` [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support Sergei Shtylyov
2016-11-07 8:41 ` Geert Uytterhoeven
2016-11-08 21:25 ` Sergei Shtylyov [this message]
2016-11-10 12:53 ` [PATCH v4] " Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4179265.sjm4z2joGl@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=horms+renesas@verge.net.au \
--cc=linux-clk@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.