All of lore.kernel.org
 help / color / mirror / Atom feed
From: Georg Schild <dangertools@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: Re: Weird behaviour of usb printer (drivers/usb/class/usblp.c:   usblp0: error -110 reading printer status)
Date: Sun, 24 Oct 2004 11:58:10 +0200	[thread overview]
Message-ID: <417B7CB2.4050805@gmx.net> (raw)
In-Reply-To: <20041020190207.27b93ba0@lembas.zaitcev.lan>


> You are making a usual mistake here. It is essential for you not to
> cover the widest possible field at this point, but to name AT LEAST ONE
> version which is proven to have this defect.

Okay, i am sure that 2.6.9-rc3 has this mistake

> 
> Also, please send your /proc/bus/usb/devices.

Here the output. The printer is accepted and works at this moment. 
Current kernel is 2.6.9, don't know if the failure still exists though i 
  am using it just for about 2 hours yet and until the mistake almost 1 
day has gone. I will tell immediatly if the error doesn't come up again. 
If someone needs some more information just tell me.

Thanks for response

Georg Schild

> T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
> S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
> S:  SerialNumber=0000:00:10.2
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
> S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
> S:  SerialNumber=0000:00:10.1
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=03f0 ProdID=3304 Rev= 1.00
> S:  Manufacturer=Hewlett-Packard
> S:  Product=DeskJet 990C
> S:  SerialNumber=ES12C1D0Y5LG
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> 
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=129/900 us (14%), #Int=  2, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
> S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> S:  SerialNumber=0000:00:10.0
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> 
> T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=046d ProdID=c404 Rev= 2.20
> S:  Manufacturer=Logitech
> S:  Product=Trackball
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> 
> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 3
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=045e ProdID=001c Rev= 5.00
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 64mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
> 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
> B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.9-gentoo-r1 ehci_hcd
> S:  Product=VIA Technologies, Inc. USB 2.0
> S:  SerialNumber=0000:00:10.3
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms


  reply	other threads:[~2004-10-24  9:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mailman.1098049140.31627.linux-kernel2news@redhat.com>
2004-10-21  2:02 ` Weird behaviour of usb printer (drivers/usb/class/usblp.c: usblp0: error -110 reading printer status) Pete Zaitcev
2004-10-24  9:58   ` Georg Schild [this message]
2004-10-25  7:19     ` Georg Schild
2004-10-17 21:34 Georg Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=417B7CB2.4050805@gmx.net \
    --to=dangertools@gmx.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.