From: Christopher Chan <cchan@outblaze.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andrew Morton <akpm@osdl.org>, linux-ide@vger.kernel.org
Subject: Re: linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems]
Date: Wed, 03 Nov 2004 14:57:36 +0800 [thread overview]
Message-ID: <41888160.5080502@outblaze.com> (raw)
In-Reply-To: <1099413643.24934.1.camel@localhost.localdomain>
> What are you on about ? The problem is that in the two traces his
> serverworks has moved from ide0 to ide2.
Here's the other case on another box that has onboard Promise plus an
add-on Promise card:
2.6.9:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20267: IDE controller at PCI slot 0000:01:02.0
PDC20267: chipset revision 2
PDC20267: ROM enabled at 0xfebd0000
PDC20267: 100% native mode on irq 27
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide0: BM-DMA at 0xef00-0xef07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xef08-0xef0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
PDC20267: IDE controller at PCI slot 0000:00:03.0
PDC20267: chipset revision 2
PDC20267: ROM enabled at 0xfeae0000
PDC20267: 100% native mode on irq 31
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: Maxtor 5T040H4, ATA DISK drive
ide2 at 0xdfe0-0xdfe7,0xdfae on irq 31
Probing IDE interface ide3...
hdg: Maxtor 5T040H4, ATA DISK drive
ide3 at 0xdfa0-0xdfa7,0xdfaa on irq 31
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide4...
Probing IDE interface ide5...
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide4...
Probing IDE interface ide5...
hde: max request size: 128KiB
hde: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hde: cache flushes not supported
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdg: cache flushes not supported
2.6.8-1.521smp (FC2):
Oct 14 04:46:49 spf0 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Oct 14 04:46:49 spf0 kernel: PDC20267: IDE controller at PCI slot
0000:01:02.0
Oct 14 04:46:49 spf0 kernel: PDC20267: chipset revision 2
Oct 14 04:46:49 spf0 kernel: PDC20267: ROM enabled at 0xfebd0000
Oct 14 04:46:49 spf0 kernel: PDC20267: 100%% native mode on irq 153
Oct 14 04:46:49 spf0 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
PCI Mode Secondary PCI Mode.
Oct 14 04:46:49 spf0 kernel: ide2: BM-DMA at 0xef00-0xef07, BIOS
settings: hde:pio, hdf:pio
Oct 14 04:46:49 spf0 kernel: ide3: BM-DMA at 0xef08-0xef0f, BIOS
settings: hdg:pio, hdh:pio
Oct 14 04:46:49 spf0 kernel: PDC20267: IDE controller at PCI slot
0000:00:03.0
Oct 14 04:46:49 spf0 kernel: PDC20267: chipset revision 2
Oct 14 04:46:49 spf0 kernel: PDC20267: ROM enabled at 0xfeae0000
Oct 14 04:46:49 spf0 kernel: PDC20267: 100%% native mode on irq 161
Oct 14 04:46:49 spf0 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
MASTER Mode Secondary MASTER Mode.
Oct 14 04:46:49 spf0 kernel: ide4: BM-DMA at 0xdf00-0xdf07, BIOS
settings: hdi:pio, hdj:pio
Oct 14 04:46:49 spf0 kernel: ide5: BM-DMA at 0xdf08-0xdf0f, BIOS
settings: hdk:pio, hdl:pio
Oct 14 04:46:49 spf0 kernel: hdi: Maxtor 5T040H4, ATA DISK drive
Oct 14 04:46:49 spf0 kernel: Using cfq io scheduler
Oct 14 04:46:49 spf0 kernel: ide4 at 0xdfe0-0xdfe7,0xdfae on irq 161
Oct 14 04:46:49 spf0 kernel: hdk: Maxtor 5T040H4, ATA DISK drive
Oct 14 04:46:49 spf0 kernel: ide5 at 0xdfa0-0xdfa7,0xdfaa on irq 161
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: IDE controller at PCI slot
0000:00:0f.1
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: chipset revision 0
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: not 100%% native mode: will
probe irqs later
Oct 14 04:46:49 spf0 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS
settings: hda:pio, hdb:pio
Oct 14 04:46:49 spf0 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS
settings: hdc:pio, hdd:pio
Oct 14 04:46:49 spf0 kernel: hdi: max request size: 128KiB
Oct 14 04:46:49 spf0 kernel: hdi: 80043264 sectors (40982 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)
Oct 14 04:46:49 spf0 kernel: hdi: hdi1 hdi2 hdi3 hdi4 < hdi5 >
Oct 14 04:46:49 spf0 kernel: hdk: max request size: 128KiB
Oct 14 04:46:49 spf0 kernel: hdk: 80043264 sectors (40982 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)
Oct 14 04:46:49 spf0 kernel: hdk: hdk1 hdk2 hdk3 hdk4 < hdk5 >
next prev parent reply other threads:[~2004-11-03 6:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <418741EB.3080701@outblaze.com>
[not found] ` <20041102011918.2b453e21.akpm@osdl.org>
[not found] ` <4187478A.1040002@outblaze.com>
[not found] ` <20041102014119.1a6096cc.akpm@osdl.org>
2004-11-02 9:04 ` linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems] Christopher Chan
2004-11-02 10:07 ` Andrew Morton
2004-11-02 9:21 ` Christopher Chan
2004-11-02 10:26 ` Andrew Morton
2004-11-02 16:40 ` Alan Cox
2004-11-03 6:57 ` Christopher Chan [this message]
2004-11-03 13:00 ` Bartlomiej Zolnierkiewicz
2004-11-03 15:51 ` Christopher Chan
2004-11-03 17:01 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41888160.5080502@outblaze.com \
--to=cchan@outblaze.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.