From mboxrd@z Thu Jan 1 00:00:00 1970 From: K.Fetscher@t-online.de (Klaus Fetscher) Subject: Re: Cross Compile Problems Date: Wed, 10 Nov 2004 08:28:21 +0100 Message-ID: <4191C315.7050206@fetron.de> References: <418FEF0E.8080304@fetron.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org >>I want to use ALSA for my ARM based custom board, but I have the >>following problems. >> >>- I am using a NFS-Root Filesystem for my embedded hardware. I have >>cross compiled the alsa-lib and the alsa-utils with the >>"--PREFIX=/tftpboot/acc-rootfs" . The root filesystem is mounted below >>"/tftpboot/acc-rootfs". When I start the mixer, he want to load the file >>"alsa.conf" with the complete path >>"/tftpboot/acc-rootfs/share/alsa/alsa.conf" . The problem is, that the >>correct path for the ARM CPU is only "/share/alsa/alsa.conf" . Are there >>any options to solve this problem ? >> >> > >You can specify datadir, libdir, etc with configure options to >override the default values. > > > If I specify datadir or libdir, some files will be installed into that directory. So is it necessary to copy these files manual to the exported NFS directory ? I didn't find any solution to specify the options for the different directories (--datadir=/dir1.. --libdir-/dir1.." and do a "make install" and all files will be on the correct directories. Thanks, Klaus ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click