[LARTC] source policy routing going to wrong path

[ro0ot <ro0ot@phreaker.net>]

Hi,

Below is my Linux firewall network configuration: -

eth0 - isp 1, IP: 1.1.1.10, Netmask: 255.255.255.252
eth1 - isp 2, IP: 2.2.2.10, Netmask: 255.255.255.252
eth2 - lan, IP: 172.16.0.254, Netmask: 255.255.255.0
eth3 - dmz, 192.168.0.254, Netmask: 255.255.255.0

isp 1 gateway: 1.1.1.9
isp 2 gateway: 2.2.2.9


Below is my iptables rules: -

echo 1 > /proc/sys/net/ipv4/ip_forward

iptables -t nat -A PREROUTING -d 1.1.1.10 -j DNAT --to-destination 
172.16.0.1
iptables -t nat -A PREROUTING -d 2.2.2.10 -j DNAT --to-destination 
192.168.0.1

iptables -t nat -A POSTROUTING -s 172.16.0.1 -j SNAT --to-source 1.1.1.10
iptables -t nat -A POSTROUTING -s 192.168.0.1 -j SNAT --to-source 2.2.2.10


Below is my split access routing for multiple providers: -

# First ISP
ip route add 1.1.1.8/30 dev eth0 src 1.1.1.10 table 1
ip route add default via 1.1.1.9 table 1

# Second ISP
ip route add 2.2.2.8/30 dev eth1 src 2.2.2.10 table 2
ip route add default via 2.2.2.9 table 2

#
ip rule add from 1.1.1.8/30 lookup 1
ip rule add from 2.2.2.8/30 lookup 2

# My default choice of gateway
ip route add default via 1.1.1.9

#
ip route add 2.2.2.8/30 dev eth1 table 1
ip route add 172.16.0.0/24 dev eth2 table 1
ip route add 192.168.0.0/24 dev eth3 table 1
ip route add 127.0.0.0/8 dev lo table 1

#
ip route add 1.1.1.8/30 dev eth0 table 2
ip route add 172.16.0.0/24 dev eth2 table 2
ip route add 192.168.0.0/24 dev eth3 table 2
ip route add 127.0.0.0/8 dev lo table 2

When I perform a traceroute from a workstation with the IP address of 
192.168.0.1 and gateway 192.168.0.254, I can see the result of the 
traceroute going through the 1.1.1.9 gateway, why?  It suppose to SNAT 
to 2.2.2.10 via 2.2.2.9 gateway.

Regards,
ro0ot




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/