From: Jiayuan Chen <jiayuan.chen@linux.dev>
To: netdev@vger.kernel.org
Cc: Eric Dumazet <edumazet@kernel.org>,
Neal Cardwell <ncardwell@google.com>,
Kuniyuki Iwashima <kuniyu@google.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Soheil Hassas Yeganeh <soheil@google.com>,
Shakeel Butt <shakeel.butt@linux.dev>,
Wei Wang <weiwan@google.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net v2] tcp: fix negative sk_forward_alloc after MSG_ZEROCOPY append
Date: Fri, 20 Nov 2026 18:09:09 +0800 [thread overview]
Message-ID: <4198a993-1c7c-4ca5-8d31-8f8e36778702@linux.dev> (raw)
In-Reply-To: <20261120094605.46063-1-jiayuan.chen@linux.dev>
On 11/20/26 5:46 PM, Jiayuan Chen wrote:
> Our local syzbot reported the following warning:
>
> WARNING: ./include/linux/ucopysize.h:57 at tcp_sendmsg_locked+0x1e13/0x1f20
> Modules linked in:
> CPU: 3 UID: 0 PID: 377 Comm: syz.2.2248 Not tainted 7.4.0-rc2+ #398 PREEMPT
> RIP: 0010:tcp_sendmsg_locked+0x1e13/0x1f20
> Call Trace:
> <TASK>
> tcp_sendmsg+0x2c/0x50
> inet_sendmsg+0x62/0xb0
> __sys_sendto+0x2fe/0x350
> __x64_sys_sendto+0x7f/0xb0
> x64_sys_call+0x1375/0x27e0
> do_syscall_64+0xe4/0x470
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
> </TASK>
>
> The problem is here:
>
> if (!skb_zcopy_pure(skb)) {
> copy = tcp_wmem_schedule(sk, copy);
> if (!copy)
> goto wait_for_space;
> }
>
> When MSG_ZEROCOPY data is appended to a skb that already holds copied
> data, only the user length is scheduled, but the pinned pages are then
> charged by their truesize:
>
> skb_zerocopy_iter_stream
> __zerocopy_sg_from_iter
> zerocopy_fill_skb_from_iter //truesize += PAGE_ALIGN(copied + start)
> sk_mem_charge(sk, truesize) //sk_forward_alloc goes negative
>
> For example, sending 8 iovecs of 1 byte each schedules 8 bytes and
> charges 32768 with 4K pages.
>
> On a later sendmsg() without MSG_ZEROCOPY, if sk_wmem_schedule() fails
> (e.g. tcp_mem hard limit is reached), tcp_wmem_schedule() returns
> min(copy, sk->sk_forward_alloc), which is negative. The negative copy
> is passed to skb_copy_to_page_nocache() and triggers the warning, and
> sendmsg() fails with -EFAULT.
>
> A few options were considered:
>
> 1) Schedule the truesize up front. It is not known before the pages
> are pinned, it depends on the iovec layout.
> 2) Do not append zerocopy data to a non pure skb. This splits a small
> header and its zerocopy payload into two skbs.
> 3) Schedule the missing part right after the pages are charged. They
> are already in the skb at this point, so this can not fail.
>
> Go with 3).
>
> Fixes: 849b425cd091 ("tcp: fix possible freeze in tx path under memory pressure")
> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
> ---
> v1: https://lore.kernel.org/netdev/20261119090828.343748-1-jiayuan.chen@linux.dev/
>
> Changes in v2:
> - Only call sk_forced_mem_schedule() for non pure zerocopy skbs (Eric)
> ---
> net/ipv4/tcp.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
> index d510e982dcea..343f6d61b408 100644
> --- a/net/ipv4/tcp.c
> +++ b/net/ipv4/tcp.c
> @@ -1359,6 +1359,8 @@ int tcp_sendmsg_locked(struct sock *sk, struct msghdr *msg, size_t size)
> if (err < 0)
> goto do_error;
> copy = err;
> + if (!skb_zcopy_pure(skb))
> + sk_forced_mem_schedule(sk, 0);
I think I should move such code before the 'if (err < 0)', like the sashiko said:
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20261119090828.343748-1-jiayuan.chen%40linux.dev
> } else if (zc == MSG_SPLICE_PAGES) {
> /* Splice in data if we can; copy if we can't. */
> if (tcp_downgrade_zcopy_pure(sk, skb))
prev parent reply other threads:[~2026-11-20 10:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 9:46 [PATCH net v2] tcp: fix negative sk_forward_alloc after MSG_ZEROCOPY append Jiayuan Chen
2026-11-20 10:09 ` Jiayuan Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4198a993-1c7c-4ca5-8d31-8f8e36778702@linux.dev \
--to=jiayuan.chen@linux.dev \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=kuniyu@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ncardwell@google.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shakeel.butt@linux.dev \
--cc=soheil@google.com \
--cc=weiwan@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.