Re: [PATCH] smsc-ircc2: Add PnP support.

[matthieu castet <castet.matthieu@free.fr>]

matthieu castet wrote:
> Meelis Roos wrote:
> 
>> mc> try to do an "echo auto > /sys/bus/pnp/device_number/resources"
>> mc> mc> It will reenable the device.
>>
>> I tried this on my Toshiba Satellite 1800-314 and the device gets IO
>> resources but is still disabled. echo activate > ... will enable it but
>> the smc-ircc2 driver still finds that the device is disabled (in
>> 2.6.10-rc2+yesterdays BK):
>>
>> nartsiss:~# cat /sys/bus/pnp/devices/00\:0a/options
>> Dependent: 01 - Priority acceptable
>>    port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 02 - Priority acceptable
>>    port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 03 - Priority acceptable
>>    port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
>> Dependent: 04 - Priority acceptable
>>    port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
> 
> that's very strange : you must have 2 io entries, 1 dma entry and an irq 
> entry.
> Could you try pnpacpi from mm series ?
no need : it is in rc2.
So do you use pnpacpi ?
If so, could you send your dsdt and try with pnpbios?

Matthieu