From: Dave Givens <dave.givens@phaldor.co.uk>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Bluetooth Printing (Belkin Print Server)
Date: Mon, 22 Nov 2004 15:41:17 +0000 [thread overview]
Message-ID: <41A2089D.5030100@phaldor.co.uk> (raw)
[-- Attachment #1: Type: text/plain, Size: 5237 bytes --]
Marcel et al,
I have taken Marcels advice and moved to SUSE 9.2 after trying
Debian on the way. I could not get Debian to work with SATA and so it
was a non starter for this system. SUSE works a treat with SATA,
wireless LAN card and everything but my bluetooth print server. I cannot
find any services for this device, my phone shows up fine as does a
windows bluetooth enabled machine. I have included results from some
commands, please let me know if there are any others I should run. Any
help would be greatly appreciated as I have very little hair left.
admin@Gimli:~> hcitool inq
Inquiring ...
00:0F:DE:1C:2A:59 clock offset: 0x2893 class: 0x520204
00:09:DD:10:39:03 clock offset: 0x7eae class: 0x020104
00:02:72:40:80:A3 clock offset: 0x2151 class: 0x040680
admin@Gimli:~> hcitool inq
Scanning ...
00:0F:DE:1C:2A:59 dave
00:09:DD:10:39:03 DRAGON
00:02:72:40:80:A3 BELKIN_PRT_4080A3
admin@Gimli:~> hcitool info 00:02:72:40:80:A3
Requesting information ...
BD Address: 00:02:72:40:80:A3
Device Name: BELKIN_PRT_4080A3
LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO>
admin@Gimli:~> hcidump -x
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
A3 80 40 72 02 00 18 CC 02 00 00 00 01
> HCI Event: Command Status (0x0f) plen 4
00 01 05 04
> HCI Event: Connect Complete (0x03) plen 11
00 29 00 A3 80 40 72 02 00 01 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
29 00 0F 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Command Complete (0x0e) plen 6
01 0D 08 00 29 00
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
A3 80 40 72 02 00 01
> HCI Event: Max Slots Change (0x1b) plen 3
29 00 05
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0051 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0051 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0051 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0051 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x1002 (PubBrwsGrp)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 15
L2CAP(d): cid 0x0040 len 11 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x6
cnt 0x3
cont 00
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0051 scid 0x0040
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0051 scid 0x0040
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0052 scid 0x0041 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0052 flags 0x0000 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0029 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0052 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 26
L2CAP(d): cid 0x0052 len 22 [psm 1]
SDP SSA Req: tid 0x0 len 0x11
pat uuid-32 0x0100 (L2CAP)
max 0xffff
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> HCI Event: Number of Completed Packets (0x13) plen 5
01 29 00 01 00
> ACL data: handle 0x0029 flags 0x02 dlen 17
L2CAP(d): cid 0x0041 len 13 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x8
cnt 0x3
cont 02 00 00
..... (etc etc etc) ....
Dave Givens
[-- Attachment #2: Type: text/html, Size: 7949 bytes --]
next reply other threads:[~2004-11-22 15:41 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-22 15:41 Dave Givens [this message]
2004-11-22 16:09 ` [Bluez-users] Bluetooth Printing (Belkin Print Server) Marcel Holtmann
2004-11-22 17:05 ` Dave Givens
2004-11-22 17:16 ` Dave Givens
2004-11-23 9:16 ` Stefan Behlert
2004-11-23 9:40 ` Marcel Holtmann
2004-11-23 15:49 ` Dave Givens
2004-11-23 16:10 ` Marcel Holtmann
2004-11-23 16:21 ` Dave Givens
2004-11-23 16:36 ` Marcel Holtmann
2004-11-23 17:20 ` Dave Givens
2004-11-23 17:26 ` Marcel Holtmann
2004-11-23 22:28 ` Dave Givens
2004-11-24 6:06 ` Marcel Holtmann
2004-11-23 16:11 ` Stefan Behlert
2004-11-23 18:57 ` Dave Givens
2004-11-24 10:18 ` Stefan Behlert
2004-11-25 1:08 ` Dave Givens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41A2089D.5030100@phaldor.co.uk \
--to=dave.givens@phaldor.co.uk \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.