From: Andy Furniss <andy.furniss@dsl.pipex.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] How can I discern egress traffic than ingress traffic?
Date: Wed, 22 Dec 2004 13:36:16 +0000 [thread overview]
Message-ID: <41C97850.4010101@dsl.pipex.com> (raw)
In-Reply-To: <20041220153849.64917.qmail@web53108.mail.yahoo.com>
Santi Anton wrote:
> I have two interfaces, eth0 and eth1 but i can't
> discern the egress traffic than ingress traffic. I
> need to apply htb qdisc in both directions, and I read
> that I need the IMQ patch to do this, because in
> ingress qdisc i can't apply htb qdisc...but where is
> the ingress qdisc? affect the traffic that goes from
> eth0 to eth1 or is for the traffic that goes from eth1
> to eth0?
You only need IMQ if you need to shape incoming traffic that is headed
for the box that you are shaping with.
If you just need to shape LAN to internet both ways then you use say htb
egress queues on eth0 and eth1 as the traffic coming in from the
internet is being sent out to your LAN as egress on you LAN interface.
Andy.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2004-12-22 13:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-20 15:38 [LARTC] How can I discern egress traffic than ingress traffic? Santi Anton
2004-12-21 3:42 ` gypsy
2004-12-22 13:36 ` Andy Furniss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41C97850.4010101@dsl.pipex.com \
--to=andy.furniss@dsl.pipex.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.