From mboxrd@z Thu Jan 1 00:00:00 1970 From: ro0ot Date: Wed, 22 Dec 2004 16:07:17 +0000 Subject: [LARTC] how to add burstable rate? Message-Id: <41C99BB5.9010609@phreaker.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I managed to fix 128kbit for an IP address of 192.168.200.3 as below: - tc qdisc add dev eth3 root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev eth3 parent 1: classid 1:1 cbq rate 128kbit allot 1500 prio 5 bounded isolated tc filter add dev eth3 parent 1: protocol ip prio 16 u32 match ip dst 192.168.200.3 flowid 1:1 tc qdisc add dev eth3 parent 1:1 sfq perturb 10 How can I make it burstable to 256kbit? What command I need to add in? Regards, ro0ot _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/