From: "Christopher R. Thompson" <Christoffur050@Verizon.Net>
To: linux-ide@vger.kernel.org
Subject: Re: ICH5 compiled in IDE, no libata, bios in Native Mode - Kernel Hung
Date: Wed, 22 Dec 2004 12:13:58 -0800 [thread overview]
Message-ID: <41C9D586.2040602@Verizon.Net> (raw)
In-Reply-To: 41C341A4.9010401@Verizon.Net
[-- Attachment #1: Type: text/plain, Size: 354 bytes --]
Compiled in IDE modules no libata. Bios in Native Mode: "P-ATA+SATA"
echo "Loading aic7xxx module"
insmod /lib/aic7xxx.o
echo "Loading ide-scsi module"
insmod /lib/ide-scsi.o
echo "Loading usb-storage module"
insmod /lib/usbcore.o
insmod /lib/ehci-hcd.o
insmod /lib/usb-uhci.o
insmod /lib/usb-storage.o
Yields syslog (attached as file Kernel-004.log)
[-- Attachment #2: Kernel-004.log --]
[-- Type: text/plain, Size: 4909 bytes --]
Linux version 2.4.27-Sharlie-two (root@Sharlie.TfJC) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #19 Mon Nov 15 06:34:48 PST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009fc00 (usable)
user: 000000000009fc00 - 00000000000a0000 (reserved)
user: 00000000000e8000 - 0000000000100000 (reserved)
user: 0000000000100000 - 000000003ffb0000 (usable)
user: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
user: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
user: 000000003fff0000 - 0000000040000000 (reserved)
user: 00000000ffb80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262064
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32688 pages.
Kernel command line: mem=1024mb idebus=66 root=/dev/hda3 hdd=ide-scsi console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=bzi2427.2
ide_setup: idebus=66
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 3198.580 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 6383.20 BogoMIPS
Memory: 1032948k/1048256k available (1365k kernel code, 14920k reserved, 531k data, 128k init, 130752k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 66MHz system bus speed for PIO modes
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.2
ICH5: chipset revision 2
ICH5: 100% native mode on irq 11
ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:pio, hdd:DMA
ICH5-SATA: IDE controller at PCI slot 00:1f.2
PCI: Found IRQ 11 for device 00:1f.2
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 11
ide2: BM-DMA at 0xef60-0xef67, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xef68-0xef6f, BIOS settings: hdg:DMA, hdh:pio
hdc: Maxtor 4R120L4, ATA DISK drive
hdd: GENERIC DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
blk: queue c0335554, I/O limit 4095Mb (mask 0xffffffff)
hde: Maxtor 6Y160M0, ATA DISK drive
blk: queue c03359a8, I/O limit 4095Mb (mask 0xffffffff)
hdg: Maxtor 6Y160M0, ATA DISK drive
hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
blk: queue c0335dfc, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0xefa8-0xefaf,0xefe2 on irq 11
ide2 at 0xefa0-0xefa7,0xef8e on irq 11
ide3 at 0xef80-0xef87,0xef8a on irq 11
hdc: attached ide-disk driver.
hdc: host protected area => 1
next prev parent reply other threads:[~2004-12-22 20:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-17 20:29 ide-core.o & libata.o ICH5 Christopher R. Thompson
2004-12-22 19:51 ` ICH5 ide modules in BOIS Compatibilty mode Christopher R. Thompson
2004-12-22 19:58 ` ICH5 libata with Bios in Compatibility mode Christopher R. Thompson
2004-12-22 20:06 ` ICH5 libata and bios in Native mode Kernel BUG Christopher R. Thompson
2004-12-22 20:13 ` Christopher R. Thompson [this message]
2004-12-22 20:14 ` ide-core.o & libata.o ICH5 Jeff Garzik
2004-12-22 22:21 ` Christopher R. Thompson
2004-12-23 8:07 ` ICH5 in 2.4.29-pre2 Christopher R. Thompson
2004-12-23 9:53 ` ide-core.o & libata.o ICH5 Christopher R. Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41C9D586.2040602@Verizon.Net \
--to=christoffur050@verizon.net \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.