From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Wed, 05 Jan 2005 14:59:44 +0000 Subject: Re: [LARTC] [PATCH] mark in u32 Message-Id: <41DC00E0.2070300@dsl.pipex.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Catalin(ux aka Dino) BOIE wrote: > Hello, Stephen, List! > > Attached is the patch for iproute2 to add the possibility to use fwmark > in u32 filters. > The kernel part was included in 2.6.10. > > Please apply! > Thank you! > > For more info: > - Kernel patch (not needed for 2.6.10): > http://kernel.umbrella.ro/net/mark_in_u32/net-match-nfmark-in-u32.patch > > - Examples: > http://kernel.umbrella.ro/net/mark_in_u32/examples.txt > > --- > Catalin(ux aka Dino) BOIE > catab at deuroconsult.ro > http://kernel.umbrella.ro/ That looks handy :-) Do you know why fw mark doesn't work with policers in 2.6 (assuming it's not just me) To stephen - I may be wrong here but in the readme it says that default kernel include is /usr/src/linux/include but if I grep for KERNEL_INCLUDE I see :- ./Makefile:KERNEL_INCLUDE:=/usr/include ./Makefile:CFLAGS = $(CCOPTS) -I$(KERNEL_INCLUDE) -I../include $(DEFINES) ./Makefile: ./configure $(KERNEL_INCLUDE) ./README:KERNEL_INCLUDE should point to correct linux kernel include directory. ISTR having to mess about a bit last time when applying esfq patch to get it to work. Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/