From: Necati DEMiR <ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: ACPI gives error at boot
Date: Wed, 05 Jan 2005 20:06:56 +0200 [thread overview]
Message-ID: <41DC2CC0.4070800@demir.web.tr> (raw)
hi,
i have problem with ACPI.
it gives error at boot.
i am sending some information.
#dmesg
.
.
.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x300b
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node cfb56400), AE_AML_REGION_LIMIT
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node cfb56500), AE_AML_REGION_LIMIT
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x300b
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x300b
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
.
.
.
# cat /proc/interrupts
CPU0
0: 4954673 IO-APIC-edge timer
1: 1829 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 136866 IO-APIC-edge i8042
14: 66145 IO-APIC-edge ide0
169: 0 IO-APIC-level uhci_hcd
177: 4553 IO-APIC-level Intel 82801BA-ICH2, saa7130[0]
185: 24 IO-APIC-level uhci_hcd
201: 52515 IO-APIC-level eth0
NMI: 0
LOC: 4954694
ERR: 0
MIS: 0
#lspci -vv
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host
Bridge (MCH) (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP
Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: e4600000-f46fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
(prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev
04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 169
Region 4: I/O ports at ef40 [size=32]
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 177
Region 4: I/O ports at efa0 [size=16]
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev
04) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 185
Region 4: I/O ports at ef80 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97
Audio (rev 04)
Subsystem: Intel Corp.: Unknown device 4d44
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 177
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ef00 [size=64]
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR
[GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 193
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:02:0a.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
DEC-Tulip compatible 10/100 Ethernet (rev 40)
Subsystem: Unknown device 3030:5032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fea80000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=220mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:0c.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
------------------------------------------------
Necati DEMiR
ndemir-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
next reply other threads:[~2005-01-05 18:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-05 18:06 Necati DEMiR [this message]
[not found] ` <41DC2CC0.4070800-8b7qcxwNidXiQSDH/tmc6Q@public.gmane.org>
2005-01-06 14:44 ` ACPI gives error at boot Necati DEMiR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41DC2CC0.4070800@demir.web.tr \
--to=ndemir-8b7qcxwnidxiqsdh/tmc6q@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.