Re: Unable to burn DVDs

[Laurent CARON <lcaron@apartia.fr>]

Lennart Sorensen wrote:

>On Mon, Jan 10, 2005 at 10:48:19PM +0100, Laurent CARON wrote:
>  
>
>>I recently upgraded to 2.6.10 and tried (today) to burn a dvd with 
>>growisofs.
>>
>>It seems there is a problem
>>
>>Here is the output
>>
>>
>># growisofs -Z /dev/scd0 -R -J ~/foobar
>>
>>WARNING: /dev/scd0 already carries isofs!
>>About to execute 'mkisofs -R -J /root/sendmail.mc | builtin_dd 
>>of=/dev/scd0 obs=32k seek=0'
>>INFO:ingISO-8859-15 character encoding detected by locale settings.
>>       Assuming ISO-8859-15 encoded filenames on source filesystem,
>>       use -input-charset to override.
>>Total translation table size: 0
>>Total rockridge attributes bytes: 252
>>Total directory bytes: 0
>>Path table size(bytes): 10
>>/dev/scd0: "Current Write Speed" is 4.1x1385KBps.
>>:-[ WRITE@LBA=0h failed with SK=4h/ASC=08h/ACQ=03h]: Input/output error
>>:-( write failed: Input/output error
>>
>>
>>Needless to say it works fine with 2.6.9
>>
>>Am I missing something?
>>    
>>
>
>Is it actually a scsi device?
>
>I haven't tried myself with 2.6.10 yet, but with 2.6.9 and older I have
>just used /dev/hda to access my dvd writer.  Seemed much better than
>ide-scsi at least.  Of course if it is usb or firewire I guess the scsi
>interface is required.
>
>Len Sorensen
>  
>
It is an internal IDE drive (laptop)

Same when using /dev/hdc or /dev/scd0

Laurent

-- 
  Why don't you pair `em up in threes? -Yogi Berra