From mboxrd@z Thu Jan 1 00:00:00 1970 From: Derek Glidden Subject: -testing goes to 100% Date: Tue, 11 Jan 2005 21:02:46 -0500 Message-ID: <41E48546.6000708@illusionary.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Sender: xen-devel-admin@lists.sourceforge.net Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Xen List List-Id: xen-devel@lists.xenproject.org Built and installed 2.0-testing from tarball as of today against 2.6.10 patches for Dom0, and xend takes the CPU to 100% and leaves it there. Dropping back down to 2.0.2/2.6.9 makes it all appear business-as-usual so far. Any "xm" commands go off into lala land without ever returning, but do respond to CTRL-C as one might expect and bring you back to the command-prompt. Base system is gentoo. Athlon-XP. My own kernel configs and not the ones built by xen, but the same config is used for 2.0.2/2.6.9 with no problems. (I used "make oldconfig" to build the -testing binaries.) Anything I can do to instrument this and see where the problem may lie? ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt