From: Steve <s.egbert@sbcglobal.net>
To: linux-kernel@vger.kernel.org
Subject: Re: 2.4.10-r1 MTRR bug
Date: Wed, 12 Jan 2005 13:34:34 -0800 [thread overview]
Message-ID: <41E597EA.2040309@sbcglobal.net> (raw)
In-Reply-To: <41E595E9.8040805@sbcglobal.net>
Steve wrote:
> For the Athlon 2100, I get the following outputs and then the VGA
> console is frozen from further output (but it doesn't prevent the full
> bootup into X windows session of which I am able to resume normal
> Linux/X session, but not able to regain any virtual console session.)
>
> The virtual console (locked) shows the following outputs:
>
> vesafb: scrolling: redraw:
> mtrr: size and base must be multiples of 4kiB (<<-- this line is
> repeated 20 times).
Oh, yes... the details... Elitegroup PC (Fry's special with Linspire
removed in favor of Gentoo 2.6.10-r1)
/proc/version
Linux version 2.6.10-gentoo-r4 (root@holy) (gcc version 3.3.4 20040623
(Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Tue Jan 11 19:23:58
PST 2005
/proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2600+
stepping : 1
cpu MHz : 2068.272
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow
bogomips : 4104.19
/proc/modules
it87 21284 0 - Live 0xe7a45000
i2c_sensor 3072 1 it87, Live 0xe781e000
i2c_isa 1920 0 - Live 0xe787c000
parport_pc 29636 1 - Live 0xe7a50000
lp 8872 0 - Live 0xe79ba000
parport 32200 2 parport_pc,lp, Live 0xe7a3c000
usbhid 29888 0 - Live 0xe7a33000
sis900 17284 0 - Live 0xe7a2d000
ehci_hcd 29572 0 - Live 0xe7a16000
ohci_hcd 19208 0 - Live 0xe7a10000
snd_pcm_oss 48548 0 - Live 0xe7a20000
snd_mixer_oss 17664 3 snd_pcm_oss, Live 0xe7a0a000
snd_seq_oss 31872 0 - Live 0xe79c6000
snd_seq_midi_event 6400 1 snd_seq_oss, Live 0xe7838000
snd_seq 49424 4 snd_seq_oss,snd_seq_midi_event, Live 0xe79fc000
snd_seq_device 7052 2 snd_seq_oss,snd_seq, Live 0xe7835000
snd_intel8x0 28192 3 - Live 0xe79a4000
snd_ac97_codec 72160 1 snd_intel8x0, Live 0xe79e9000
snd_pcm 84616 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xe79d3000
snd_timer 21380 2 snd_seq,snd_pcm, Live 0xe799d000
snd 47844 11
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_in
tel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xe79ad000
soundcore 7648 3 snd, Live 0xe7825000
snd_page_alloc 7684 2 snd_intel8x0,snd_pcm, Live 0xe7822000
usbcore 104056 4 usbhid,ehci_hcd,ohci_hcd, Live 0xe7861000
ide_cd 36868 0 - Live 0xe782a000
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 :
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1008-100b : PM_TMR
1016-1016 : PM2_CNT_BLK
1020-1023 : GPE0_BLK
1030-1033 : GPE1_BLK
4000-400f : 0000:00:02.5
4000-4007 : ide0
4008-400f : ide1
c000-cfff : PCI Bus #01
c000-c07f : 0000:01:00.0
d000-d0ff : 0000:00:02.6
d400-d47f : 0000:00:02.6
d800-d8ff : 0000:00:02.7
d800-d8ff : SiS SI7012
dc00-dc7f : 0000:00:02.7
dc00-dc7f : SiS SI7012
e000-e0ff : 0000:00:04.0
e000-e0ff : sis900
/proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-26feffff : System RAM
00100000-003b806d : Kernel code
003b806e-004a5bff : Kernel data
26ff0000-26ff2fff : ACPI Non-volatile Storage
26ff3000-26ffffff : ACPI Tables
d0000000-d7ffffff : 0000:00:00.0
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : 0000:01:00.0
e0000000-e3ffffff : 0000:00:0a.0
e5000000-e50fffff : PCI Bus #01
e5000000-e501ffff : 0000:01:00.0
e5100000-e5100fff : 0000:00:03.2
e5100000-e5100fff : ohci_hcd
e5101000-e5101fff : 0000:00:03.3
e5101000-e5101fff : ehci_hcd
e5102000-e5102fff : 0000:00:04.0
e5102000-e5102fff : sis900
e5103000-e5103fff : 0000:00:03.0
e5103000-e5103fff : ohci_hcd
e5104000-e5104fff : 0000:00:03.1
e5104000-e5104fff : ohci_hcd
f000ef6f-f100ef6e : vesafb
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
lspci -vvv
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS]
741/741GX/M741 Host (rev 03)
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, non-prefetchable)
Capabilities: [c0] AGP version 3.5
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown
device 0003 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e5000000-e50fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL
Media IO] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(rev 01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 4000 [size=16]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Elitegroup Computer Systems: Unknown device 0c04
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at d000
Region 1: I/O ports at d400 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems
[SiS] Sound Controller (rev a0)
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at d800
Region 1: I/O ports at dc00 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e5103000 (32-bit, non-prefetchable)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin B routed to IRQ 21
Region 0: Memory at e5104000 (32-bit, non-prefetchable)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin C routed to IRQ 22
Region 0: Memory at e5100000 (32-bit, non-prefetchable)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at e5101000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet (rev 91)
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e000
Region 1: Memory at e5102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0a.0 Multimedia video controller: Internext Compression Inc
iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (32000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
661/741/760 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems: Unknown device 1b13
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: Memory at d8000000 (32-bit, prefetchable)
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: CD-ROM Model: F565E Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
/proc/acpi/wakeup
Device Sleep state Status
FUTS 4 *enabled
PCI0 5 disabled
USB0 3 disabled
USB1 3 disabled
USB2 3 disabled
USB3 3 disabled
MAC0 5 disabled
AMR0 4 disabled
UAR1 5 disabled
PS2M 5 disabled
PS2K 4 disabled
next prev parent reply other threads:[~2005-01-12 21:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-12 21:26 2.4.10-r1 MTRR bug Steve
2005-01-12 21:34 ` Steve [this message]
2005-01-13 7:05 ` Andrew Morton
2005-01-14 22:26 ` Daniel Drake
2005-01-15 0:50 ` disabling VESAFB no longer locks up VT (was Re: 2.4.10-r1 MTRR bug) Steve
2005-01-15 0:57 ` 2.4.10-r1 MTRR bug ( Steve
2005-01-15 23:59 ` Steve
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41E597EA.2040309@sbcglobal.net \
--to=s.egbert@sbcglobal.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.