From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andy Furniss <andy.furniss@dsl.pipex.com>
Date: Thu, 13 Jan 2005 03:21:00 +0000
Subject: Re: [LARTC] How to balance OUTBOUND traffic by packet if..
Message-Id: <41E5E91C.6050606@dsl.pipex.com>
List-Id: <lartc.vger.kernel.org>
References: <1383.192.168.1.2.1105108845@maild.mine.nu>
In-Reply-To: <1383.192.168.1.2.1105108845@maild.mine.nu>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

junk@maild.mine.nu wrote:
> I am still looking for a solution to this problem.......
> 
>>junk@maild.mine.nu wrote:
>>
>>>Hi,
>>>Yes i did give this a try a couple of times before with no success
>>>
>>> /sbin/iptables -I OUTPUT -m nth --every 2 --packet 1 -t mangle -j MARK
>>>--set-mark 0x2
>>> /sbin/iptables -I OUTPUT -m nth --every 2 --packet 0 -t mangle -j MARK
>>>--set-mark 0x1

Had a go at this on 2.6.9 / iptables 1.2.11 and it seeems nth is broken.

I'll try again tomorrow.

Andy.


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/