From mboxrd@z Thu Jan 1 00:00:00 1970 From: Derrik Pates Subject: Re: Kernel crash Date: Wed, 19 Jan 2005 11:54:45 -0500 Message-ID: <41EE90D5.6060007@devrandom.net> References: <200501191504.49759.tobias@aquazul.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200501191504.49759.tobias@aquazul.com> Sender: xen-devel-admin@lists.sourceforge.net Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Tobias Hunger Cc: Ian Pratt , xen-devel@lists.sourceforge.net List-Id: xen-devel@lists.xenproject.org Tobias Hunger wrote: > I did. The flags reappear during make ARCH=xen and the consoles get added to > my kernel in spite of those settings. That is why I edited the Kconfig files. > Ugly but works... Are you doing 'make ARCH=xen (menu|x|g)config' ? If you don't, the config will probably not be correct for your target architecture. > My results so far: > extra="": crash > extra="console=xen": no output (hoping that this turns of the other consoles) > extra="console=tty2": crash > extra="console=ttyS0": no output > extra="xencons=ttyS console=ttyS0": crash > extra="xencons=off": no output > extra="xencons=off console=ttyS0": no output > extra="xencons=off console=tty1": no output > No config_vm, config_vgaconsole, etc. (nothing set in .config that contains > "CONS"): crash > No config_vm, ... with modified Kconfig files: no output This is on an unprivileged domain? Unprivileged domains don't have a VGA console, and they don't have access to serial ports; the console is implemented through an inter-domain communication channel, like the virtual network and block devices are. -- Derrik Pates demon@devrandom.net ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt