From mboxrd@z Thu Jan 1 00:00:00 1970 From: tdc Subject: Re: save / migrate not working on gentoo? Date: Fri, 21 Jan 2005 01:10:54 +0100 Message-ID: <41F0488E.1060100@phreaker.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: xen-devel-admin@lists.sourceforge.net Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: xen-devel List-Id: xen-devel@lists.xenproject.org > Is there anything useful in /var/log/xfrd.log or xend.debug? both were included in previous mail, not sure if there is anything usefull for debugging this > BTW: I've heard that setting mem= on the domU kernel command line can > cause problems, but haven't investigated yet. my domain setup script is quite simple, no 'mem=' on domU kernel command line -- kernel = "/boot/vmlinuz-2.6.10-xenU" name = "virt-1" hostname = "virt" memory = 128 disk = [ 'file:/xen/virt-1,sda1,w', file:/xen/virt-1.swap,sda2,w' ] nics=1 ip = "192.168.0.31" netmask = "255.255.254.0" gateway = "81.95.106.1" root = "/dev/sda1 ro" > Obviously the size of the domain shuoldn't make any difference, but have > you tried creating and saving a small domain e.g. 64MB? (I'm just > wandering whether something daft is happening with EINTR or something > during IO). I've tried it just now - domU with 48MB, still the same results. There is some python testing script in tools/xfrd, maybe it could help me to find the problem, but I'm not sure how much I can tinker with it. I don't know, which commands to use and how the xfrd reply should look like. Dave ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl