From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?T=F3th_N=E1ndor?= Date: Sun, 23 Jan 2005 16:10:59 +0000 Subject: Re: [LARTC] Shaping traffic with high priority hosts Message-Id: <41F3CC93.4070905@sch.bme.hu> List-Id: References: <20050123141435.68417.qmail@web50409.mail.yahoo.com> In-Reply-To: <20050123141435.68417.qmail@web50409.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi! George Spiliotis wrote: > Dear all > > My current setup is the following: > > Normal Hosts --------+ eth0 eth1 > | +----------+ > +-<->| F/W box |--<-> Internet > | +----------+ > High priority hosts--+ Your questions are very typical. It can be easily accomplished using HTB on interface eth0. You do not need IMQ. There are numerous sites dealing with this problem. For example: http://luxik.cdi.cz/~devik/qos/htb/ http://www.knowplace.org/shaper/ Go and read them. -- Udv, Nandor _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/