From: "Fredy P." <digitalfredy@debiancolombia.org>
To: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] usb trendnet
Date: Thu, 27 Jan 2005 15:26:41 -0500 [thread overview]
Message-ID: <41F94E81.90207@debiancolombia.org> (raw)
In-Reply-To: <1105014610.4299.28.camel@pegasus>
Marcel Holtmann escribi=F3:
> Hi Fredy,
>=20
>=20
>>I read the HW compatible list, and no is in it usb trendnet adapters, i=
s=20
>>becouse are no tested or becouse are no soported?
>>
>>I read the user and developer list archives whit the word trendnet and =
i=20
>>no get information.
>>
>>I neds buy a usb adapter, the trendent TBW-102UB have 1000m, buy it?
>>are any other 100m tested in linux?
>=20
>=20
> you only know if it works if you buy it, but in general every USB
> adapter works. However the CSR ones seem to work better than the rest,
> but this is not a BlueZ problem.
>=20
> After you get it working send us "hciconfig -a" and the content
> of /proc/bus/usb/devices.
Hi Marcel, i buy the trendent TBW-102UB bluetooth usb adapter, i can see=20
other devices and the other devices can see the pc but y can not send or=20
recive information (the other device is a sonyericsson movil), i read=20
but can understand very good, where can get information abut?
i like see bluetooth in the OSI model for understand, you can help me=20
whit a link?
tanks and sorry my bad english
# hciconfig -a
hci0: Type: USB
BD Address: 00:E0:98:D1:A8:B3 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:99 acl:0 sco:0 events:13 errors:0
TX bytes:296 acl:0 sco:0 commands:12 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'PINGU-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP=20
Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
################# end ################
# cat /proc/bus/usb/devices
T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 2
B: Alloc=3D 27/900 us ( 3%), #Int=3D 1, #Iso=3D 2
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 0.00
S: Product=3DUSB OHCI Root Hub
S: SerialNumber=3Dcc2f1000
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 M=
xCh=3D 0
D: Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D07b8 ProdID=3Db02a Rev=3D 5.25
S: Product=3DBluetooth USB Adapter
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3D80 MxPwr=3D 86mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
I: If#=3D 2 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver=
=3D(none)
######################### end #########################################
PD: CSR =3D Cambridge Silicon Radio ?
>=20
> Regards
>=20
> Marcel
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>=20
--=20
Suerte and F.S.Fv.
ATT: Fredy P.
___________________________________________________
F.S.Fv. es acr=F3nimo de Free Software Forever
http://www.fsf.org/philosophy/free-sw.es.html
Normas b=E1sicas de comportamiento en el ciberespacio
http://www.netiqueta.org/
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-01-27 20:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-06 0:02 [Bluez-users] usb trendnet Fredy P.
2005-01-06 12:30 ` Marcel Holtmann
2005-01-27 20:26 ` Fredy P. [this message]
2005-01-27 23:58 ` Michal Semler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41F94E81.90207@debiancolombia.org \
--to=digitalfredy@debiancolombia.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.