All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian King <brking@us.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Linux Arch list <linux-arch@vger.kernel.org>,
	Matthew Wilcox <matthew@wil.cx>, Greg KH <greg@kroah.com>,
	Linux Kernel list <linux-kernel@vger.kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	Paul Mackerras <paulus@samba.org>,
	linuxppc64-dev <linuxppc64-dev@ozlabs.org>,
	linux-pci@atrey.karlin.mff.cuni.cz
Subject: Re: pci: Arch hook to determine config space size
Date: Mon, 31 Jan 2005 22:52:29 -0600	[thread overview]
Message-ID: <41FF0B0D.8020003@us.ibm.com> (raw)
In-Reply-To: <1107227727.5963.46.camel@gaston>

[-- Attachment #1: Type: text/plain, Size: 1075 bytes --]

Benjamin Herrenschmidt wrote:
> On Mon, 2005-01-31 at 16:43 -0600, Brian King wrote:
> 
> 
>>diff -puN include/asm-ppc64/prom.h~ppc64_pcix_mode2_cfg include/asm-ppc64/prom.h
>>--- linux-2.6.11-rc2-bk9/include/asm-ppc64/prom.h~ppc64_pcix_mode2_cfg	2005-01-31 14:32:01.000000000 -0600
>>+++ linux-2.6.11-rc2-bk9-bjking1/include/asm-ppc64/prom.h	2005-01-31 14:32:01.000000000 -0600
>>@@ -137,6 +137,7 @@ struct device_node {
>> 	int	devfn;			/* for pci devices */
>> 	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
>> 	int	eeh_config_addr;
>>+	int	pci_ext_config_space;	/* for phb's or bridges */
>> 	struct  pci_controller *phb;	/* for pci devices */
>> 	struct	iommu_table *iommu_table;	/* for phb's or bridges */
> 
> 
> Grrr... more crap added to the device-node, I don't like that ...
> 
> This is a PHB only field, can't it be in struct pci_controller instead ?

Assuming I am reading the spec correctly, this is only a property of the 
PHB, so I could move it into the pci_controller struct instead.

-- 
Brian King
eServer Storage I/O
IBM Linux Technology Center

[-- Attachment #2: ppc64_pcix_mode2_cfg.patch --]
[-- Type: text/plain, Size: 3433 bytes --]


When working with a PCI-X Mode 2 adapter on a PCI-X Mode 1 PPC64
system, the current code used to determine the config space size
of a device results in a PCI Master abort and an EEH error, resulting
in the device being taken offline. This patch checks OF to see if
the PCI bridge supports PCI-X Mode 2 and fails config accesses beyond
256 bytes if it does not.


---

 linux-2.6.11-rc2-bk9-bjking1/arch/ppc64/kernel/pSeries_pci.c |   31 ++++++++++-
 linux-2.6.11-rc2-bk9-bjking1/include/asm-ppc64/pci-bridge.h  |    1 
 2 files changed, 30 insertions(+), 2 deletions(-)

diff -puN arch/ppc64/kernel/pSeries_pci.c~ppc64_pcix_mode2_cfg arch/ppc64/kernel/pSeries_pci.c
--- linux-2.6.11-rc2-bk9/arch/ppc64/kernel/pSeries_pci.c~ppc64_pcix_mode2_cfg	2005-01-31 22:27:49.000000000 -0600
+++ linux-2.6.11-rc2-bk9-bjking1/arch/ppc64/kernel/pSeries_pci.c	2005-01-31 22:31:04.000000000 -0600
@@ -52,6 +52,16 @@ static int s7a_workaround;
 
 extern struct mpic *pSeries_mpic;
 
+static int config_access_valid(struct device_node *dn, int where)
+{
+	if (where < 256)
+		return 1;
+	if (where < 4096 && dn->phb->pci_ext_config_space)
+		return 1;
+
+	return 0;
+}
+
 static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val)
 {
 	int returnval = -1;
@@ -62,8 +72,11 @@ static int rtas_read_config(struct devic
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	if (where & (size - 1))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
+	if (!config_access_valid(dn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	addr = (dn->busno << 16) | (dn->devfn << 8) | where;
+	addr = ((where & 0xf00) << 20) | (dn->busno << 16) |
+		(dn->devfn << 8) | (where & 0xff);
 	buid = dn->phb->buid;
 	if (buid) {
 		ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval,
@@ -110,8 +123,11 @@ static int rtas_write_config(struct devi
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	if (where & (size - 1))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
+	if (!config_access_valid(dn, where))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	addr = (dn->busno << 16) | (dn->devfn << 8) | where;
+	addr = ((where & 0xf00) << 20) | (dn->busno << 16) |
+		(dn->devfn << 8) | (where & 0xff);
 	buid = dn->phb->buid;
 	if (buid) {
 		ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val);
@@ -270,6 +286,16 @@ static int phb_set_bus_ranges(struct dev
 	return 0;
 }
 
+static char __devinit get_phb_config_space_type(struct pci_controller *phb)
+{
+	int *type = (int *)get_property(phb->arch_data,
+					"ibm,pci-config-space-type", NULL);
+
+	if (type && *type == 1)
+		return 1;
+	return 0;
+}
+
 static int __devinit setup_phb(struct device_node *dev,
 			       struct pci_controller *phb,
 			       unsigned int addr_size_words)
@@ -285,6 +311,7 @@ static int __devinit setup_phb(struct de
 	phb->arch_data = dev;
 	phb->ops = &rtas_pci_ops;
 	phb->buid = get_phb_buid(dev);
+	phb->pci_ext_config_space = get_phb_config_space_type(phb);
 
 	return 0;
 }
diff -puN include/asm-ppc64/pci-bridge.h~ppc64_pcix_mode2_cfg include/asm-ppc64/pci-bridge.h
--- linux-2.6.11-rc2-bk9/include/asm-ppc64/pci-bridge.h~ppc64_pcix_mode2_cfg	2005-01-31 22:27:49.000000000 -0600
+++ linux-2.6.11-rc2-bk9-bjking1/include/asm-ppc64/pci-bridge.h	2005-01-31 22:27:49.000000000 -0600
@@ -17,6 +17,7 @@
 struct pci_controller {
 	struct pci_bus *bus;
 	char is_dynamic;
+	char pci_ext_config_space;
 	void *arch_data;
 	struct list_head list_node;
 

_

  reply	other threads:[~2005-02-01  4:52 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-01-28 14:56 [PATCH 1/2] pci: Arch hook to determine config space size brking
2005-01-28 18:52 ` Christoph Hellwig
2005-01-29  4:06   ` Greg KH
2005-01-31 19:10     ` Brian King
2005-01-31 19:15       ` Greg KH
2005-01-31 19:29       ` Matthew Wilcox
2005-01-31 20:51         ` Arnd Bergmann
2005-01-31 21:35         ` Brian King
2005-01-31 21:56           ` Arnd Bergmann
2005-01-31 22:13             ` Greg KH
2005-01-31 22:43             ` Brian King
2005-02-01  3:15               ` Benjamin Herrenschmidt
2005-02-01  4:52                 ` Brian King [this message]
2005-02-01  4:57                   ` Benjamin Herrenschmidt
2005-02-02 10:05                     ` Arnd Bergmann
2005-02-03  0:23                       ` Benjamin Herrenschmidt
2005-02-01 12:32                   ` Matthew Wilcox
2005-02-01 20:16                     ` Brian King
2005-01-31 19:40       ` Brian King
2005-02-01  7:46         ` Grant Grundler
2005-02-01 15:23           ` Brian King
  -- strict thread matches above, loose matches on Subject: below --
2005-01-31 23:22 arndb
2005-01-31 23:22 ` arndb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41FF0B0D.8020003@us.ibm.com \
    --to=brking@us.ibm.com \
    --cc=arnd@arndb.de \
    --cc=benh@kernel.crashing.org \
    --cc=greg@kroah.com \
    --cc=hch@infradead.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    --cc=linuxppc64-dev@ozlabs.org \
    --cc=matthew@wil.cx \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.