Question about cpm reset on 8xx

[Per Hallsmark <per.hallsmark@t2data.se>]

Hi all,

Working with a board using hdlc over SCC channel (852T) and kernel 2.4.21,
in the cpm reset code in arch/ppc/8xx_io/commproc.c it's like:

void
m8xx_cpm_reset()
{
        volatile immap_t         *imp;
        volatile cpm8xx_t       *commproc;
        pte_t                   *pte;


        imp = (immap_t *)IMAP_ADDR;
        commproc = (cpm8xx_t *)&imp->im_cpm;

 
#ifdef CONFIG_UCODE_PATCH
        /* Perform a reset.
        */
        commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);


        /* Wait for it.
        */
        while (commproc->cp_cpcr & CPM_CR_FLG);


        cpm_load_patch(imp);
#endif
     .......

In our case, CONFIG_UCODE_PATCH is not defined so the commproc is never
reseted during reboot. Could it be that the #ifdef CONFIG_UCODE_PATCH
should just be around the cpm_load_patch command?
The CONFIG_UCODE_PATCH seems to point this to be i2c/spi patch, but
shouldn't a reset go to cpm in anycase?

/Per