Re: powerpc/powernv/opal: Use standard interrupts property when available

[Michael Ellerman <patch-notifications@ellerman.id.au>]

On Tue, 2018-04-10 at 07:16:10 UTC, Benjamin Herrenschmidt wrote:
> For (bad) historical reasons, OPAL used to create a non-standard pair of
> properties "opal-interrupts" and "opal-interrupts-names" for representing
> the list of interrupts it wants Linux to request on its behalf.
> 
> Among other issues, the opal-interrupts doesn't have a way to carry the
> type of interrupts, and they were assumed to be all level sensitive.
> 
> This is wrong on some recent systems where some of them are edge sensitive
> causing warnings in the XIVE code and possible misbehaviours if they need
> to be retriggered (typically the NPU2 TCE error interrupts).
> 
> This makes Linux switch to using the standard "interrupts" and
> "interrupt-names" properties instead when they are available, using standard
> of_irq helpers, which can carry all the desired type information.
> 
> Newer versions of OPAL will generate those properties in addition to the
> legacy ones.
> 
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/77b5f703dcc859915f0f20d92bc538

cheers