From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <420259FE.2080204@tootai.net> From: administrator tootai MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Re: Connection issue with headset References: <41FA06A5.3010904@tootai.net> <41FE4744.5010804@tootai.net> <4200D3B6.1050708@tootai.net> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-15; format=flowed Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 03 Feb 2005 18:06:06 +0100 Sebastian Roth a =E9crit : > [...] > If you followed this and it does not work I have two ideas. > 1. Is it possible that your headset does not send any AT commands > over the connected RFCOMM channel? As far as I know btsco will never > try to establish an SCO connection without having recived the cmd > from your headset. > 2. The headset is sending "other" commands when pressing the headset > button. Same effect as 1. > > Please have a look at hcidump -x to see if your headset is sending such > a command when pressing the button! Hi list, continuing to check what is wrong I try this command sdptool browse=20 00:0b:2e:06:01:2e Browsing 00:0B:2E:06:01:2E ... Service Search failed: Protocol error nomade:# =20 and thats the hcidump -X result HCIDump - HCI packet analyzer ver 1.12 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 0000: 2e 01 06 2e 0b 00 18 cc 02 00 00 00 00 ............. > HCI Event: Command Status (0x0f) plen 4 0000: 00 01 05 04 .... > HCI Event: Link Key Request (0x17) plen 6 0000: 2e 01 06 2e 0b 00 ...... < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 0000: 2e 01 06 2e 0b 00 98 0f 70 e7 ad ee 4b 1a 93 1c ........p...K... 0010: ba 18 77 0c 19 00 ..w... > HCI Event: Command Complete (0x0e) plen 10 0000: 01 0b 04 00 2e 01 06 2e 0b 00 .......... > HCI Event: Connect Complete (0x03) plen 11 0000: 00 29 00 2e 01 06 2e 0b 00 01 00 .)......... < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 0000: 01 29 00 01 00 .)... > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0 > HCI Event: Max Slots Change (0x1b) plen 3 0000: 29 00 05 ).. > HCI Event: Number of Completed Packets (0x13) plen 5 0000: 01 29 00 01 00 .)... > ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 > ACL data: handle 0x0029 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 48 < ACL data: handle 0x0029 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0 < ACL data: handle 0x0029 flags 0x02 dlen 24 L2CAP(d): cid 0x0040 len 20 [psm 1] SDP SSA Req: tid 0x0 len 0xf pat uuid-16 0x1002 (PubBrwsGrp) max 0xffff aid(s) 0x0000 - 0xffff cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 0000: 01 29 00 01 00 .)... > HCI Event: Number of Completed Packets (0x13) plen 5 0000: 01 29 00 01 00 .)... > ACL data: handle 0x0029 flags 0x02 dlen 27 > ACL data: handle 0x0029 flags 0x01 dlen 24 L2CAP(d): cid 0x0040 len 47 [psm 1] SDP SSA Rsp: tid 0xd3c0 len 0x2a cnt 0x26 srv rec #0 aid 0x0000 (SrvRecHndl) uint 0x10000 aid 0x22c2 (unknown) ERROR: Unexpected syntax 0000: 12 b3 e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 =20 ................ 0010: b4 00 00 ... srv rec #1 ERROR: Unexpected syntax 0000: b3 e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 =20 ................ 0010: 00 00 .. srv rec #2 ERROR: Unexpected syntax 0000: e4 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 =20 ................ 0010: 00 . srv rec #3 ERROR: Unexpected syntax 0000: 12 fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20 ................ srv rec #4 ERROR: Unexpected syntax 0000: fc c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20 ............... srv rec #5 ERROR: Unexpected syntax 0000: c5 12 b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20 .............. srv rec #6 ERROR: Unexpected syntax 0000: b4 15 12 fc c5 90 0e 12 12 b4 00 00 =20 ............ srv rec #7 ERROR: Unexpected syntax 0000: 15 12 fc c5 90 0e 12 12 b4 00 00 =20 ........... srv rec #8 ERROR: Unexpected syntax 0000: fc c5 90 0e 12 12 b4 00 00 =20 ......... srv rec #9 ERROR: Unexpected syntax 0000: c5 90 0e 12 12 b4 00 00 .....= ... srv rec #10 ERROR: Unexpected syntax 0000: 0e 12 12 b4 00 00 ...... srv rec #11 ERROR: Unexpected syntax 0000: b4 00 00 ... srv rec #12 ERROR: Unexpected syntax 0000: 00 00 .. srv rec #13 ERROR: Unexpected syntax 0000: 00 . srv rec #14 ERROR: Unexpected syntax cont < ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 0000: 01 29 00 01 00 .)... > ACL data: handle 0x0029 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 < HCI Command: Disconnect (0x01|0x0006) plen 3 0000: 29 00 13 ).. > HCI Event: Command Status (0x0f) plen 4 0000: 00 01 06 04 .... > HCI Event: Disconn Complete (0x05) plen 4 0000: 00 29 00 16 .).. It give some informations to you gurus ;-)? --=20 Daniel ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users