From: matthieu castet <castet.matthieu@free.fr>
To: Clemens Ladisch <clemens@ladisch.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: mpu401_pnp
Date: Mon, 07 Feb 2005 20:13:26 +0100 [thread overview]
Message-ID: <4207BDD6.3020808@free.fr> (raw)
In-Reply-To: <Pine.HPX.4.33n.0502071640410.3379-100000@studcom.urz.uni-halle.de>
[-- Attachment #1: Type: text/plain, Size: 271 bytes --]
Hi,
Clemens Ladisch wrote:
>>One question : does snd_card_set_dev(card, &device->dev) is important ?
>
>
> Well, this pointer should be set if possible, but I'm not sure if it's
> actually used anywhere.
>
Ok, I update my patch in order to use it.
Regards
Matthieu
[-- Attachment #2: mpu.patch --]
[-- Type: text/x-patch, Size: 4950 bytes --]
--- mpu401.c?rev=1.22 2005-02-07 20:08:05.000000000 +0100
+++ mpu401.c 2005-02-07 20:07:57.000000000 +0100
@@ -57,6 +57,53 @@
MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device.");
static snd_card_t *snd_mpu401_legacy_cards[SNDRV_CARDS] = SNDRV_DEFAULT_PTR;
+static int pnp_registered = 0;
+
+static int snd_card_mpu401_add(int dev)
+{
+ snd_card_t *card;
+ int err;
+
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+ strcpy(card->driver, "MPU-401 UART");
+ strcpy(card->shortname, card->driver);
+ sprintf(card->longname, "%s at %#lx, ", card->shortname, port[dev]);
+ if (irq[dev] >= 0) {
+ sprintf(card->longname + strlen(card->longname), "irq %d", irq[dev]);
+ } else {
+ strcat(card->longname, "polled");
+ }
+
+ if (snd_mpu401_uart_new(card, 0,
+ MPU401_HW_MPU401,
+ port[dev], 0,
+ irq[dev], irq[dev] >= 0 ? SA_INTERRUPT : 0, NULL) < 0) {
+ printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
+ snd_card_free(card);
+ return -ENODEV;
+ }
+ if ((err = snd_card_register(card)) < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ snd_mpu401_legacy_cards[dev] = card;
+ return 0;
+}
+
+static int __devinit snd_card_mpu401_probe(int dev)
+{
+ if (port[dev] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "specify port\n");
+ return -EINVAL;
+ }
+ if (irq[dev] == SNDRV_AUTO_IRQ) {
+ snd_printk(KERN_ERR "specify or disable IRQ\n");
+ return -EINVAL;
+ }
+ return snd_card_mpu401_add(dev);
+}
#ifdef CONFIG_PNP
@@ -91,72 +138,9 @@
} else {
irq[dev] = pnp_irq(device, 0);
}
- return 0;
+ return snd_card_mpu401_add(dev);
}
-#endif
-
-static int __devinit snd_card_mpu401_probe(int dev, struct pnp_dev *device,
- const struct pnp_device_id *pnp_id)
-{
- snd_card_t *card;
- int err;
-#ifdef CONFIG_PNP
- if (!device) {
-#endif
- if (port[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "specify port\n");
- return -EINVAL;
- }
- if (irq[dev] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "specify or disable IRQ\n");
- return -EINVAL;
- }
-#ifdef CONFIG_PNP
- } else {
- if ((err = snd_mpu401_pnp(dev, device, pnp_id)) < 0)
- return err;
- }
-#endif
-
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
- strcpy(card->driver, "MPU-401 UART");
- strcpy(card->shortname, card->driver);
- sprintf(card->longname, "%s at %#lx, ", card->shortname, port[dev]);
- if (irq[dev] >= 0) {
- sprintf(card->longname + strlen(card->longname), "irq %d", irq[dev]);
- } else {
- strcat(card->longname, "polled");
- }
-#ifdef CONFIG_PNP
- if (device) {
- snd_card_set_dev(card, &device->dev);
- }
-#endif
- if (snd_mpu401_uart_new(card, 0,
- MPU401_HW_MPU401,
- port[dev], 0,
- irq[dev], irq[dev] >= 0 ? SA_INTERRUPT : 0, NULL) < 0) {
- printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
- snd_card_free(card);
- return -ENODEV;
- }
- if ((err = snd_card_register(card)) < 0) {
- snd_card_free(card);
- return err;
- }
-#ifdef CONFIG_PNP
- if (device)
- pnp_set_drvdata(device, card);
- else
-#endif
- snd_mpu401_legacy_cards[dev] = card;
- return 0;
-}
-
-#ifdef CONFIG_PNP
static int __devinit snd_mpu401_pnp_probe(struct pnp_dev *pnp_dev,
const struct pnp_device_id *id)
{
@@ -166,9 +150,12 @@
for ( ; dev < SNDRV_CARDS; ++dev) {
if (!enable[dev] || !pnp[dev])
continue;
- err = snd_card_mpu401_probe(dev, pnp_dev, id);
+ err = snd_mpu401_pnp(dev, pnp_dev, id);
if (err < 0)
return err;
+ snd_card_set_dev(snd_mpu401_legacy_cards[dev], &device->dev);
+ pnp_set_drvdata(pnp_dev, snd_mpu401_legacy_cards[dev]);
+ snd_mpu401_legacy_cards[dev] = NULL;
++dev;
return 0;
}
@@ -189,11 +176,14 @@
.probe = snd_mpu401_pnp_probe,
.remove = __devexit_p(snd_mpu401_pnp_remove),
};
+#else
+static struct pnp_driver snd_mpu401_pnp_driver;
#endif
static int __init alsa_card_mpu401_init(void)
{
int dev, devices = 0;
+ int err;
for (dev = 0; dev < SNDRV_CARDS; dev++) {
if (!enable[dev])
@@ -202,19 +192,20 @@
if (pnp[dev])
continue;
#endif
- if (snd_card_mpu401_probe(dev, NULL, NULL) >= 0)
+ if (snd_card_mpu401_probe(dev) >= 0)
devices++;
}
-#ifdef CONFIG_PNP
- devices += pnp_register_driver(&snd_mpu401_pnp_driver);
-#endif
+ if ((err = pnp_register_driver(&snd_mpu401_pnp_driver)) >= 0) {
+ pnp_registered = 1;
+ devices += err;
+ }
+
if (!devices) {
#ifdef MODULE
printk(KERN_ERR "MPU-401 device not found or device busy\n");
#endif
-#ifdef CONFIG_PNP
- pnp_unregister_driver(&snd_mpu401_pnp_driver);
-#endif
+ if (pnp_registered)
+ pnp_unregister_driver(&snd_mpu401_pnp_driver);
return -ENODEV;
}
return 0;
@@ -224,9 +215,8 @@
{
int idx;
-#ifdef CONFIG_PNP
- pnp_unregister_driver(&snd_mpu401_pnp_driver);
-#endif
+ if (pnp_registered)
+ pnp_unregister_driver(&snd_mpu401_pnp_driver);
for (idx = 0; idx < SNDRV_CARDS; idx++)
snd_card_free(snd_mpu401_legacy_cards[idx]);
}
next prev parent reply other threads:[~2005-02-07 19:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-31 20:50 mpu401_pnp castet.matthieu
2005-02-07 8:46 ` mpu401_pnp Clemens Ladisch
2005-02-07 10:40 ` mpu401_pnp castet.matthieu
2005-02-07 12:10 ` mpu401_pnp matthieu castet
2005-02-07 12:59 ` mpu401_pnp matthieu castet
2005-02-07 15:54 ` mpu401_pnp Clemens Ladisch
2005-02-07 19:13 ` matthieu castet [this message]
2005-02-07 19:23 ` mpu401_pnp matthieu castet
2005-02-09 16:46 ` mpu401_pnp Clemens Ladisch
2005-02-09 14:17 ` mpu401_pnp matthieu castet
2005-02-11 10:00 ` mpu401_pnp Clemens Ladisch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4207BDD6.3020808@free.fr \
--to=castet.matthieu@free.fr \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.