From: Brad Campbell <brad@wasp.net.au>
To: linux-ide@vger.kernel.org
Subject: libata oops 2.6.11-rc4 yesterdays BK
Date: Wed, 16 Feb 2005 08:28:06 +0400 [thread overview]
Message-ID: <4212CBD6.7020703@wasp.net.au> (raw)
Woke up to this, this morning.
This is yesterdays 2.6.11-rc4 BK + libata BK + libata-dev BK
It was in the middle of a RAID-6 rebuild (scheduled to take about 740 minutes)
Regards,
Brad
Feb 16 07:32:17 storage1 kernel: ata15: command timeout
Feb 16 07:32:17 storage1 kernel: Assertion failed! qc->flags &
ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=2703
Feb 16 07:32:17 storage1 kernel: ata15: status=0x51 { DriveReady SeekComplete Error }
Feb 16 07:32:17 storage1 kernel: ata15: called with no error (51)!
Feb 16 07:32:17 storage1 kernel: ------------[ cut here ]------------
Feb 16 07:32:17 storage1 kernel: kernel BUG at drivers/scsi/scsi.c:299!
Feb 16 07:32:17 storage1 kernel: invalid operand: 0000 [#1]
Feb 16 07:32:17 storage1 kernel: CPU: 0
Feb 16 07:32:17 storage1 kernel: EIP: 0060:[<c0257a0b>] Not tainted VLI
Feb 16 07:32:17 storage1 kernel: EFLAGS: 00010046 (2.6.11-rc4)
Feb 16 07:32:17 storage1 kernel: EIP is at scsi_put_command+0x8b/0xa0
Feb 16 07:32:17 storage1 kernel: eax: df99cb80 ebx: df99cb80 ecx: df99cb90 edx: df99cb90
Feb 16 07:32:17 storage1 kernel: esi: dfc70000 edi: 00000292 ebp: dfc66400 esp: dfcabe7c
Feb 16 07:32:17 storage1 kernel: ds: 007b es: 007b ss: 0068
Feb 16 07:32:17 storage1 kernel: Process scsi_eh_14 (pid: 799, threadinfo=dfcaa000 task=dfc73a20)
Feb 16 07:32:17 storage1 kernel: Stack: dfc7d3c8 dfcc6200 dfc65a28 df99cb80 00000296 dfc65a28
c025c859 df99cb80
Feb 16 07:32:17 storage1 kernel: dfc7d3c8 c025c97f df99cb80 00000001 00000000 df99cb80
df99cb80 00000004
Feb 16 07:32:17 storage1 kernel: df99cc3c c025ccfe df99cb80 00000001 00000000 00000000
000057b3 000057b3
Feb 16 07:32:17 storage1 kernel: Call Trace:
Feb 16 07:32:17 storage1 kernel: [<c025c859>] scsi_next_command+0x19/0x30
Feb 16 07:32:17 storage1 kernel: [<c025c97f>] scsi_end_request+0xbf/0xe0
Feb 16 07:32:17 storage1 kernel: [<c025ccfe>] scsi_io_completion+0x1ae/0x490
Feb 16 07:32:17 storage1 kernel: [<c026927b>] sd_rw_intr+0xcb/0x280
Feb 16 07:32:17 storage1 kernel: [<c02580ea>] scsi_finish_command+0x7a/0xc0
Feb 16 07:32:17 storage1 kernel: [<c0266ad9>] ata_scsi_qc_complete+0x39/0x70
Feb 16 07:32:17 storage1 kernel: [<c026460a>] ata_qc_complete+0x3a/0xc0
Feb 16 07:32:17 storage1 kernel: [<c0267e30>] pdc_eng_timeout+0x90/0x120
Feb 16 07:32:17 storage1 kernel: [<c026663a>] ata_scsi_error+0x1a/0x30
Feb 16 07:32:17 storage1 kernel: [<c025bd4e>] scsi_error_handler+0x9e/0xe0
Feb 16 07:32:17 storage1 kernel: [<c025bcb0>] scsi_error_handler+0x0/0xe0
Feb 16 07:32:17 storage1 kernel: [<c0100831>] kernel_thread_helper+0x5/0x14
Feb 16 07:32:17 storage1 kernel: Code: 5c 24 08 8b 74 24 0c 89 44 24 1c 8b 7c 24 10 8b 6c 24 14 83
c4 18 e9 e5 15 fd ff 89 43 10 89 48 04 31 db 89 51 04 89 4e 0c eb b7 <0f> 0b 2b 01 e7 1a 32 c0 eb 95
8d 74 26 00 8d bc 27
00 00 00 00
Feb 16 07:32:19 storage1 kernel: <1>Unable to handle kernel NULL pointer dereference at virtual
address 00000004
Feb 16 07:32:19 storage1 kernel: printing eip:
Feb 16 07:32:19 storage1 kernel: c01333c3
Feb 16 07:32:19 storage1 kernel: *pde = 00000000
Feb 16 07:32:19 storage1 kernel: Oops: 0000 [#2]
Feb 16 07:32:19 storage1 kernel: CPU: 0
Feb 16 07:32:19 storage1 kernel: EIP: 0060:[<c01333c3>] Not tainted VLI
Feb 16 07:32:19 storage1 kernel: EFLAGS: 00010016 (2.6.11-rc4)
Feb 16 07:32:19 storage1 kernel: EIP is at free_block+0x43/0xd0
Feb 16 07:32:19 storage1 kernel: eax: 00800000 ebx: 00000000 ecx: 00000000 edx: c1000000
Feb 16 07:32:19 storage1 kernel: esi: c1506d60 edi: 00000000 ebp: c1506d6c esp: c14e9ef0
Feb 16 07:32:19 storage1 kernel: ds: 007b es: 007b ss: 0068
Feb 16 07:32:19 storage1 kernel: Process events/0 (pid: 3, threadinfo=c14e8000 task=c14da020)
Feb 16 07:32:19 storage1 kernel: Stack: c0132601 00000014 c1506d7c dff08b70 dff08b60 00000001
c1506d60 c0133a0a
Feb 16 07:32:19 storage1 kernel: c1506d60 dff08b70 00000001 c1506d60 00000003 c1506dd0
c1506cfc c0133aaa
Feb 16 07:32:19 storage1 kernel: c1506d60 dff08b60 00000000 c14da170 00000293 00000000
c051fca4 c0133a50
Feb 16 07:32:19 storage1 kernel: Call Trace:
Feb 16 07:32:19 storage1 kernel: [<c0132601>] kmem_freepages+0x81/0xa0
Feb 16 07:32:19 storage1 kernel: [<c0133a0a>] drain_array_locked+0x7a/0xc0
Feb 16 07:32:19 storage1 kernel: [<c0133aaa>] cache_reap+0x5a/0x150
Feb 16 07:32:19 storage1 kernel: [<c0133a50>] cache_reap+0x0/0x150
Feb 16 07:32:19 storage1 kernel: [<c012326e>] worker_thread+0x19e/0x240
Feb 16 07:32:19 storage1 kernel: [<c0111b50>] default_wake_function+0x0/0x20
Feb 16 07:32:19 storage1 kernel: [<c0111b50>] default_wake_function+0x0/0x20
Feb 16 07:32:19 storage1 kernel: [<c01230d0>] worker_thread+0x0/0x240
Feb 16 07:32:19 storage1 kernel: [<c0126ae5>] kthread+0xa5/0xb0
Feb 16 07:32:19 storage1 kernel: [<c0126a40>] kthread+0x0/0xb0
Feb 16 07:32:19 storage1 kernel: [<c0100831>] kernel_thread_helper+0x5/0x14
Feb 16 07:32:19 storage1 kernel: Code: 83 00 00 00 8d 46 1c 8d 6e 0c 89 44 24 08 8b 44 24 24 8b 15
b0 fd 51 c0 8b 0c b8 8d 81 00 00 00 40 c1 e8 0c c1 e0 05 8b 5c 02 1c <8b> 53 04 8b 03 89 50 04 89 02
c7 43 04 00 02 20 00
2b 4b 0c c7
storage1:/home/brad# lspci -vv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
Subsystem: Asustek Computer, Inc. A7V8X motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+
Rate=x4,x8,x@
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e6000000-e7dfffff
Prefetchable memory behind bridge: e7f00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
0000:00:0b.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x90 (576 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d400 [size=64]
Region 1: I/O ports at d000 [size=16]
Region 2: I/O ports at b800 [size=128]
Region 3: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e4800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0d.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x90 (576 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=64]
Region 1: I/O ports at b000 [size=16]
Region 2: I/O ports at a800 [size=128]
Region 3: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e3800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0e.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at a400 [size=64]
Region 1: I/O ports at a000 [size=16]
Region 2: I/O ports at 9800 [size=128]
Region 3: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e2800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 9400 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8400 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: I/O ports at 7800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Interrupt: pin A routed to IRQ 14
Region 4: I/O ports at 7400 [disabled] [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 7000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 6800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 6400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 6000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 0
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:13.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 5800 [size=64]
Region 1: I/O ports at 5400 [size=16]
Region 2: I/O ports at 5000 [size=128]
Region 3: Memory at e1800000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
(prog-if 00 [VGA])
Subsystem: Unknown device 1682:201a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+
Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_X86_PC=y
CONFIG_MK7=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_BINFMT_ELF=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_QLA2XXX=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID6=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETDEVICES=y
CONFIG_SK98LIN=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_LIBPS2=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ISA=y
CONFIG_I2C_SENSOR=y
CONFIG_SENSORS_IT87=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
CONFIG_CRC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
storage1:/home/brad# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi7 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi9 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi10 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi11 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi12 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi13 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi14 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
storage1:/home/brad# cat /proc/meminfo
MemTotal: 514824 kB
MemFree: 453212 kB
Buffers: 772 kB
Cached: 27820 kB
SwapCached: 0 kB
Active: 12788 kB
Inactive: 20320 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 514824 kB
LowFree: 453212 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 9480 kB
Slab: 11148 kB
CommitLimit: 257412 kB
Committed_AS: 12824 kB
PageTables: 424 kB
VmallocTotal: 516024 kB
VmallocUsed: 96 kB
VmallocChunk: 515920 kB
storage1:/home/brad# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Sempron(TM) 2600+
stepping : 1
cpu MHz : 0.000
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
sse pni syscall mp mmxext 3dnowext 3dnow
bogomips : 1828.45
storage1:/home/brad# cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 /dev/vc/0
4 tty
4 ttyS
5 /dev/tty
5 /dev/console
5 /dev/ptmx
7 vcs
10 misc
13 input
89 i2c
128 ptm
136 pts
254 devfs
Block devices:
8 sd
9 md
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
254 mdp
storage1:/home/brad# cat /proc/interrupts
CPU0
0: 234810 IO-APIC-edge timer
1: 74 IO-APIC-edge i8042
8: 4 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
16: 237783 IO-APIC-level libata
17: 234690 IO-APIC-level libata
18: 322433 IO-APIC-level SysKonnect SK-98xx, libata
19: 214411 IO-APIC-level libata
NMI: 0
LOC: 235733
ERR: 0
MIS: 0
--
"Human beings, who are almost unique in having the ability
to learn from the experience of others, are also remarkable
for their apparent disinclination to do so." -- Douglas Adams
next reply other threads:[~2005-02-16 4:28 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-16 4:28 Brad Campbell [this message]
2005-02-16 11:01 ` libata oops 2.6.11-rc4 yesterdays BK Brad Campbell
2005-02-16 17:25 ` Jeff Garzik
2005-02-16 20:54 ` Brad Campbell
2005-02-16 21:40 ` Andy Warner
2005-02-16 22:47 ` Jeff Garzik
2005-02-16 23:49 ` Andy Warner
2005-02-16 23:58 ` Jeff Garzik
2005-02-17 0:20 ` Andy Warner
2005-02-17 5:08 ` Jeff Garzik
2005-02-17 14:59 ` Andy Warner
2005-02-17 19:13 ` Jeff Garzik
2005-02-17 19:25 ` Andy Warner
2005-02-17 22:36 ` Jeff Garzik
2005-02-17 19:42 ` Which SATA Combos To Consider? Danny Cox
2005-02-17 20:55 ` Jeff Garzik
2005-02-18 0:25 ` Ryan Bourgeois
2005-02-18 0:44 ` Johny Ågotnes
2005-02-18 0:52 ` Jeff Garzik
2005-02-21 23:50 ` Johny Ågotnes
2005-02-21 23:50 ` Johny Ågotnes
2005-02-22 1:55 ` Johny Ågotnes
2005-02-18 6:13 ` libata oops 2.6.11-rc4 yesterdays BK Brad Campbell
2005-02-19 4:14 ` Brad Campbell
2005-02-21 4:27 ` Brad Campbell
2005-02-22 10:09 ` Brad Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4212CBD6.7020703@wasp.net.au \
--to=brad@wasp.net.au \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.