All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steven Cole <elenstev@mesatop.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Steven Cole <elenstev@mesatop.com>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
Date: Wed, 23 Feb 2005 15:10:38 -0700	[thread overview]
Message-ID: <421CFF5E.4030402@mesatop.com> (raw)
In-Reply-To: <20050223121759.5cb270ee.akpm@osdl.org>

Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:

>> I am having trouble getting recent -mm kernels to boot on my test box.
>> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>>
>> VFS: Cannot open root device "301" or unknown-block(3,1)
>> Please append a correct "root=" boot option
>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
>>
[snipped]
> 
> Please set CONFIG_BASE_FULL=y.  Check that this causes CONFIG_BASE_SMALL=0,
> then retest.

Yes, that worked.  2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.

[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist

Reading another post (and looking in /dev), I tried hdq:

[root@spc1 steven]# mount -t reiser4 /dev/hdq1 /reiser4_testing
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   75M  214M  26% /
/dev/hda9 reiserfs    8.3G  3.9G  4.4G  48% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.7G  5.4G  24% /usr
/dev/hda7     ext3    1.9G   86M  1.7G   5% /var
/dev/hdq1  reiser4     18G  217M   18G   2% /reiser4_testing

Snipped from dmesg:

hda: ST320423A, ATA DISK drive
hdb: WDC WD200BB-75AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
hda: cache flushes not supported
  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hdb: cache flushes not supported
  /dev/ide/host0/bus0/target1/lun0: p1


Steven

  reply	other threads:[~2005-02-23 22:17 UTC|newest]

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-23  9:42 2.6.11-rc4-mm1 Andrew Morton
2005-02-23 11:03 ` 2.6.11-rc4-mm1 Mathieu Segaud
2005-02-23 16:32   ` 2.6.11-rc4-mm1 Robert Love
2005-02-23 13:06 ` 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ? Helge Hafting
2005-02-23 20:12   ` Andrew Morton
2005-02-23 22:36     ` Laurent Riffard
2005-02-23 23:11       ` Matt Mackall
2005-02-23 23:20       ` Andrew Morton
2005-02-24 17:02         ` Laurent Riffard
2005-02-23 23:47       ` Greg KH
2005-02-24 17:06         ` Laurent Riffard
2005-02-24 17:18           ` Greg KH
2005-02-24 20:42             ` Laurent Riffard
2005-02-24 23:17               ` Greg KH
2005-02-23 23:32     ` Mathieu Segaud
2005-02-24  0:17       ` Matt Mackall
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
2005-02-23 20:17   ` Andrew Morton
2005-02-23 22:10     ` Steven Cole [this message]
2005-02-23 22:54       ` Steven Cole
2005-02-24  0:16         ` Andrew Morton
2005-02-24  0:25           ` Andrew Morton
2005-02-24 13:19             ` Bartlomiej Zolnierkiewicz
2005-02-25  0:20             ` Felipe Alfaro Solana
2005-02-24  0:41           ` Matt Mackall
2005-02-24  2:03             ` Benoit Boissinot
2005-02-24  2:08               ` Matt Mackall
2005-02-23 23:03       ` Andrew Morton
2005-02-23 23:03         ` Matt Mackall
2005-02-24  0:44       ` Matt Mackall
2005-02-24 15:59         ` Steven Cole
2005-02-24 16:18         ` Steven Cole
2005-02-23 22:45   ` Matt Mackall
2005-02-23 17:07 ` 2.6.11-rc4-mm1 Vincent Vanackere
2005-02-23 18:20 ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 21:24   ` 2.6.11-rc4-mm1 Dominik Brodowski
2005-02-23 22:00     ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 23:56     ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 21:05 ` 2.6.11-rc4-mm1 Benoit Boissinot
2005-02-23 21:42   ` [PATCH] process-wide itimer typo fixes Roland McGrath
2005-02-23 21:30 ` 2.6.11-rc4-mm1 Adrian Bunk
2005-02-23 21:49 ` 2.6.11-rc4-mm1 (compile stats) John Cherry
2005-02-23 22:22 ` 2.6.11-rc4-mm1 Francois Romieu
2005-02-23 22:38 ` 2.6.11-rc4-mm1 J.A. Magallon
2005-02-23 23:12   ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-23 23:40     ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-24  0:20       ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-24  0:26       ` 2.6.11-rc4-mm1 Fabian Fenaut
2005-02-25  0:06       ` 2.6.11-rc4-mm1 J.A. Magallon
2005-02-25  3:18         ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-23 23:07 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-23 23:25   ` 2.6.11-rc4-mm1 Andrew Morton
2005-02-24 11:11 ` 2.6.11-rc4-mm1: infiniband/core/user_mad.c warning Adrian Bunk
2005-02-24 11:11 ` [-mm patch] drivers/md/dm-hw-handler.c: fix compile warnings Adrian Bunk
2005-02-24 21:51 ` [-mm patch] seccomp: don't say it was more or less mandatory Adrian Bunk
2005-02-24 22:41   ` Andrea Arcangeli
2005-02-25 21:14     ` Adrian Bunk
2005-02-26  1:31       ` Andrea Arcangeli
2005-03-01  0:32         ` Adrian Bunk
2005-03-01  0:44           ` Andrea Arcangeli
2005-03-03 14:51             ` Adrian Bunk
2005-03-03 16:24               ` Andrea Arcangeli
2005-03-03 21:55               ` Andrew Morton
2005-03-15 10:09                 ` Ingo Molnar
2005-03-15 10:15                   ` Ingo Molnar
2005-03-15 11:27                   ` Ingo Molnar
2005-03-15 13:00                     ` Andrea Arcangeli
2005-03-15 14:44                       ` Ingo Molnar
2005-03-15 14:59                         ` Andrea Arcangeli
2005-03-15 15:00                           ` Ingo Molnar
2005-03-15 15:05                       ` Ingo Molnar
2005-03-15 16:44                         ` Andrea Arcangeli
2005-03-16  8:28                           ` Ingo Molnar
2005-03-16 10:46                             ` Andrea Arcangeli
2005-03-16 13:41                               ` Ingo Molnar
2005-03-16 17:28                                 ` Andrea Arcangeli
2005-03-17 10:27                                   ` Ingo Molnar
2005-03-17 10:49                                     ` Andrea Arcangeli
2005-02-26 11:31 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
2005-03-02  6:43   ` Jeff Garzik
2005-03-02 14:08     ` Adrian Bunk
2005-03-02 19:12       ` Jeff Garzik
2005-03-02 20:38         ` Andrew Morton
2005-03-02 21:07           ` Jeff Garzik
2005-03-02 21:18             ` Andrew Morton
2005-03-02 21:56               ` Adrian Bunk
2005-03-02 22:14                 ` Andrew Morton
2005-03-02 22:41               ` Jeff Garzik
2005-03-02 22:45                 ` Adrian Bunk
2005-03-02 22:49                   ` Jeff Garzik
2005-03-03 15:07                     ` How to handle the multiple aes variants on i386? Adrian Bunk
2005-03-02 21:59         ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
2005-02-27 15:48 ` [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups Adrian Bunk
2005-02-27 22:23   ` Christoph Hellwig
2005-02-28 18:07 ` [-mm patch] drivers/scsi/ch.c: make a struct static Adrian Bunk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=421CFF5E.4030402@mesatop.com \
    --to=elenstev@mesatop.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.