From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.dev.rtsoft.ru (RT-soft-2.Moscow.itn.ru [80.240.96.70]) by ozlabs.org (Postfix) with SMTP id 3708167A76 for ; Fri, 25 Feb 2005 22:49:29 +1100 (EST) Message-ID: <421F1321.9050508@ru.mvista.com> Date: Fri, 25 Feb 2005 14:59:29 +0300 From: Andrei Konovalov MIME-Version: 1.0 To: "Finn S. Nielsen" References: <001b01c51b2d$46378890$0c2ca8c0@FNIBM> In-Reply-To: <001b01c51b2d$46378890$0c2ca8c0@FNIBM> Content-Type: text/plain; charset=us-ascii; format=flowed Cc: linuxppc-embedded@ozlabs.org Subject: Re: Stuck in booting 2.6.10-ac11 on Memec Design FF1152... List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Finn S. Nielsen wrote: > Hi Jakob, > > I noticed on the embedded powerpc mailing list, that you are working w. linux on the Memec V2P20 FF1152 board. > I have one too and I'm given the task to get a linux up and running on it... > > What kernel version are you using and where did you get the source ?. > It seems to me that in the official source tree, there is only support > for the Xilinx ML300 board - or am I missing something? If you are speaking about 2.6 then you aren't missing anything. > Montavista and MIND systems say they have a port for the memec board, but if an open MontaVista's code for memec is in linuxppc-2.4 tree. http://ppc.bkbits.net:8080/linuxppc-2.4/cset@1.1282 We've used 2VP7-FG456 board with the P160 COMM module. Best rewgards, Andrei > source port exists, I'd prefer that. > > Best regards, > > Finn S. Nielsen > IO Technologies a/s > Carl Jacobsens Vej 16, opg. 6, 3 sal > 2500 Valby > Denmark > Tlp (direct): +45 36188109 > Fax:. +45 36188101 > Check out our new website: http://www.iotech.dk > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded