From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hinko Kocevar Date: Fri, 25 Feb 2005 18:37:59 +0100 Subject: [U-Boot-Users] jffs2 fs for linux In-Reply-To: <41108D1A0010B564@hawk.dcu.ie> References: <41108D1A0010B564@hawk.dcu.ie> Message-ID: <421F6277.6030604@iskramedical.si> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Alan Casey wrote: > Hi Hinko, > > I had a similar problem. If you make sure > that your Flash is programmed similar to > the following order then it should work > with the setup you describe: > > Image1 Addr1 u-boot <-- mounted as /dev/mtdblock0 > Image2 Addr2 kernel <-- mounted as /dev/mtdblock1 > Image3 Addr3 jffs2 <-- mounted as /dev/mtdblock2 > Hmm, this is just like my setup in flash. 0x00000000 - 0x000c0000 uboot+env 0x000c0000 - 0x002c0000 kernel 0x002c0000 - 0x02000000 rootfs(jffs2) But as you can see from my previous post, kernel does not mount the rootfs as expected. Are there any special/other bits I have to setup? The same layout works on another pxa platform I have, but it is not running u-boot... regards, hk -- hinko kocevar iskramedical si Hinko Kocevar, embedded systems developer Iskra Medical d.o.o., Stegne 23, 1k LJ, SLO-EU "A? r?n" | [Analects XII:22]