All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Garzik <jgarzik@pobox.com>
To: Wen Xiong <wendyx@us.ibm.com>
Cc: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
	Andrew Morton <akpm@osdl.org>
Subject: Re: [ patch 5/7] drivers/serial/jsm: new serial device driver
Date: Sun, 27 Feb 2005 19:39:27 -0500	[thread overview]
Message-ID: <4222683F.2070609@pobox.com> (raw)
In-Reply-To: <42225A57.7050200@us.ltcfwd.linux.ibm.com>

Wen Xiong wrote:

> +/* Our "in use" variables, to enforce 1 open only */
> +static int jsm_mgmt_in_use[MAXMGMTDEVICES];

Eliminate MAXMGMTDEVICES


> +
> +/*
> + * jsm_mgmt_open()  
> + *
> + * Open the mgmt/downld/dpa device
> + */  
> +int jsm_mgmt_open(struct inode *inode, struct file *file)
> +{
> +	unsigned long lock_flags;
> +	unsigned int minor = JSM_MINOR(inode);
> +
> +	DPR_MGMT(("jsm_mgmt_open start.\n"));
> +
> +	spin_lock_irqsave(&jsm_global_lock, lock_flags);
> +
> +	/* mgmt device */
> +	if (minor < MAXMGMTDEVICES) {
> +		/* Only allow 1 open at a time on mgmt device */
> +		if (jsm_mgmt_in_use[minor]) {
> +			spin_unlock_irqrestore(&jsm_global_lock, lock_flags);
> +			return -EBUSY;
> +		}
> +		jsm_mgmt_in_use[minor]++;

An interruptible sleep (semaphore?) is usually preferred to EBUSY.


> +	else {
> +		spin_unlock_irqrestore(&jsm_global_lock, lock_flags);
> +		return -ENXIO;
> +	}
> +
> +	spin_unlock_irqrestore(&jsm_global_lock, lock_flags);
> +
> +	DPR_MGMT(("jsm_mgmt_open finish.\n"));
> +
> +	return 0;
> +}
> +
> +/*
> + * jsm_mgmt_close()
> + *
> + * Open the mgmt/dpa device
> + */  
> +int jsm_mgmt_close(struct inode *inode, struct file *file)
> +{
> +	unsigned long lock_flags;
> +	unsigned int minor = JSM_MINOR(inode);
> +
> +	DPR_MGMT(("jsm_mgmt_close start.\n"));
> +
> +	spin_lock_irqsave(&jsm_global_lock, lock_flags);
> +
> +	/* mgmt device */
> +	if (minor < MAXMGMTDEVICES) {
> +		if (jsm_mgmt_in_use[minor])
> +			jsm_mgmt_in_use[minor] = 0;
> +	}
> +	spin_unlock_irqrestore(&jsm_global_lock, lock_flags);
> +
> +	DPR_MGMT(("jsm_mgmt_close finish.\n"));
> +
> +	return 0;
> +}
> +
> +/*
> + * jsm_mgmt_ioctl()
> + *
> + * ioctl the mgmt/dpa device
> + */  
> +
> +int jsm_mgmt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
> +{
> +	unsigned long lock_flags;
> +	void __user *uarg = (void __user *) arg;
> +
> +	DPR_MGMT(("jsm_mgmt_ioctl start.\n"));
> +
> +	switch (cmd) {
> +
> +	case DIGI_GETDD:
> +	{
> +		/*
> +		 * This returns the total number of boards
> +		 * in the system, as well as driver version
> +		 * and has space for a reserved entry
> +		 */
> +		struct digi_dinfo ddi;

stack usage



> +		spin_lock_irqsave(&jsm_global_lock, lock_flags);
> +
> +		ddi.dinfo_nboards = jsm_NumBoards;
> +		sprintf(ddi.dinfo_version, "%s", "40002438_A-INKERNEL");
> +
> +		spin_unlock_irqrestore(&jsm_global_lock, lock_flags);
> +
> +		DPR_MGMT(("DIGI_GETDD returning numboards: %d version: %s\n",
> +			ddi.dinfo_nboards, ddi.dinfo_version));
> +
> +		if (copy_to_user(uarg, &ddi, sizeof (ddi)))
> +			return -EFAULT;
> +
> +		break;
> +	}
> +
> +	case DIGI_GETBD:
> +	{
> +		int brd;
> +
> +		struct digi_info di;

ditto


> +		if (copy_from_user(&brd, uarg, sizeof(int)))
> +			return -EFAULT;
> +
> +		DPR_MGMT(("DIGI_GETBD asking about board: %d\n", brd));
> +
> +		if ((brd < 0) || (brd > jsm_NumBoards) || (jsm_NumBoards == 0))
> +			return -ENODEV;
> +
> +		memset(&di, 0, sizeof(di));
> +
> +		di.info_bdnum = brd;
> +
> +		spin_lock_irqsave(&jsm_Board[brd]->bd_lock, lock_flags);
> +
> +		di.info_bdtype = jsm_Board[brd]->dpatype;
> +		di.info_bdstate = jsm_Board[brd]->dpastatus;
> +		di.info_ioport = 0;
> +		di.info_physaddr = (ulong) jsm_Board[brd]->membase;
> +		di.info_physsize = (ulong) jsm_Board[brd]->membase - jsm_Board[brd]->membase_end;
> +		if (jsm_Board[brd]->state != BOARD_FAILED)
> +			di.info_nports = jsm_Board[brd]->nasync;
> +		else
> +			di.info_nports = 0;
> +
> +		spin_unlock_irqrestore(&jsm_Board[brd]->bd_lock, lock_flags);
> +
> +		DPR_MGMT(("DIGI_GETBD returning type: %x state: %x ports: %x size: %x\n",
> +			di.info_bdtype, di.info_bdstate, di.info_nports, di.info_physsize));
> +
> +		if (copy_to_user(uarg, &di, sizeof (di)))
> +			return -EFAULT;
> +
> +		break;
> +	}
> +
> +	case DIGI_GET_NI_INFO:
> +	{
> +		struct channel_t *ch;
> +		struct ni_info ni;
> +		ulong lock_flags;
> +		uchar mstat = 0;
> +		uint board = 0;
> +		uint channel = 0;
> +
> +		if (copy_from_user(&ni, uarg, sizeof(struct ni_info)))
> +			return -EFAULT;
> +
> +		DPR_MGMT(("DIGI_GETBD asking about board: %d channel: %d\n",
> +			ni.board, ni.channel));
> +
> +		board = ni.board;
> +		channel = ni.channel;
> +
> +		/* Verify boundaries on board */
> +		if ((board < 0) || (board > jsm_NumBoards) || (jsm_NumBoards == 0))
> +			return -ENODEV;
> +
> +		/* Verify boundaries on channel */
> +		if ((channel < 0) || (channel > jsm_Board[board]->nasync))
> +			return -ENODEV;
> +
> +		ch = jsm_Board[board]->channels[channel];
> +
> +		if (!ch || ch->magic != JSM_CHANNEL_MAGIC)
> +			return -ENODEV;
> +
> +		memset(&ni, 0, sizeof(ni));
> +		ni.board = board;
> +		ni.channel = channel;
> +
> +		spin_lock_irqsave(&ch->ch_lock, lock_flags);
> +
> +		mstat = (ch->ch_mostat | ch->ch_mistat);
> +
> +		if (mstat & UART_MCR_DTR) {
> +			ni.mstat |= TIOCM_DTR;
> +			ni.dtr = TIOCM_DTR;
> +		}
> +		if (mstat & UART_MCR_RTS) {
> +			ni.mstat |= TIOCM_RTS;
> +			ni.rts = TIOCM_RTS;
> +		}
> +		if (mstat & UART_MSR_CTS) {
> +			ni.mstat |= TIOCM_CTS;
> +			ni.cts = TIOCM_CTS;
> +		}
> +		if (mstat & UART_MSR_RI) {
> +			ni.mstat |= TIOCM_RI;
> +			ni.ri = TIOCM_RI;
> +		}
> +		if (mstat & UART_MSR_DCD) {
> +			ni.mstat |= TIOCM_CD;
> +			ni.dcd = TIOCM_CD;
> +		}
> +		if (mstat & UART_MSR_DSR)
> +			ni.mstat |= TIOCM_DSR;
> +
> +		ni.iflag = ch->ch_c_iflag;
> +		ni.oflag = ch->ch_c_oflag;
> +		ni.cflag = ch->ch_c_cflag;
> +		ni.lflag = ch->ch_c_lflag;
> +
> +		if (ch->ch_flags & CH_STOPI)
> +			ni.recv_stopped = 1;
> +		else
> +			ni.recv_stopped = 0;
> +
> +		if (ch->ch_flags & CH_STOP)
> +			ni.xmit_stopped = 1;
> +		else
> +			ni.xmit_stopped = 0;
> +
> +		ni.curtx = ch->ch_txcount;
> +		ni.currx = ch->ch_rxcount;
> +
> +		ni.baud = ch->ch_old_baud;
> +
> +		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
> +
> +		if (copy_to_user(uarg, &ni, sizeof(ni)))
> +			return -EFAULT;
> +
> +		break;
> +	}
> +
> +	}
> +
> +	DPR_MGMT(("jsm_mgmt_ioctl finish.\n"));
> +
> +	return 0;
> +}


  reply	other threads:[~2005-02-28  0:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-27 23:40 [ patch 5/7] drivers/serial/jsm: new serial device driver Wen Xiong
2005-02-28  0:39 ` Jeff Garzik [this message]
2005-03-04 21:08   ` Wen Xiong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4222683F.2070609@pobox.com \
    --to=jgarzik@pobox.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=wendyx@us.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.