From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eckhard Doll Date: Tue, 01 Mar 2005 09:16:53 +0100 Subject: [U-Boot-Users] das u-boot and disc on chip In-Reply-To: <20050228200324.A00A6C1510@atlas.denx.de> References: <20050228200324.A00A6C1510@atlas.denx.de> Message-ID: <422424F5.1060908@esem.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang Denk schrieb: > > I'm not exactly sure what you mean by "boot device". It is no problem In this case the part of the board design which appears at address 0x00 of lh7a404 after reset. > You would have to write your own separate bootstrap loader then. IMHO > this is not woth the trouble. Yes, shouldn't be. Initialise ram, move and jump. I'm quite new to this arm and embedded linux stuff and played a bit with a kev7a400 board and a patched u-boot-0.45 and now I will use das u-boot with a 2.6-kernel on a small lh7a404-design with mentioned DoC and some sdram and several io's Any hint or doc-pointer on adaption of das u-boot to this lh7a404 soc? As it is a SoC, there shouldn't be much board-specific stuff to be done for a boot-loader. Regards, -- Eckhard Doll Messtechnik / Metrology TE-SM ESEM Gr?nau GmbH & Co. KG D-88677 Markdorf Germany Phone +49.7544.9583.27 Fax +49.7544.9583.60 mailto: doll at esem.com http://www.esem.com