From mboxrd@z Thu Jan  1 00:00:00 1970
From: Eckhard Doll <doll@esem.com>
Date: Tue, 01 Mar 2005 16:46:26 +0100
Subject: [U-Boot-Users] das u-boot and disc on chip
In-Reply-To: <20050301134724.E76B3C1510@atlas.denx.de>
References: <20050301134724.E76B3C1510@atlas.denx.de>
Message-ID: <42248E52.8070109@esem.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Excuse me if its going OT now. Maybe, you can point me, out of your 
embedded experience, to a better source.

Wolfgang Denk schrieb:
> 
> I didn't mean to say that, but if you feel like it - ok. Anyway:
> please see CanUBootBeConfiguredSuchThatItCanBeStartedInRAM.html
> [Read: don't expect support]
> 
> Ummm... I'm afraid I have to destroy your illusions. This will  be  a
> full port like any other.
no illusions, maybe it sounds like, yes. I'm just thrown into this 
project with an existing design and looking for solutions. The board 
consists of an lh7a404(arm922t-core),2x64MB SDRAM,64MB Flash DoC, 
Ethernet, USB, 2xUART and extension bus, nothing else. My preferred OS 
is, of course, Linux.

If I understood you right, U-Boot is maybe not the best choice for me, 
because there are only 2KB XIP Flash available at address 0x00000000 on 
startup.

Because of the several boot-modes, the lh7a404 offers, I'm thinking in 
the meantime about to ommit the loader completely and copy the kernel 
image directly from DoC to ram and jump there.

Regards,

-- 
Eckhard Doll
Messtechnik / Metrology TE-SM
ESEM Gr?nau GmbH & Co. KG
D-88677 Markdorf
Germany

Phone +49.7544.9583.27
Fax +49.7544.9583.60
mailto: doll at esem.com
http://www.esem.com